VITAL MOBILE WIRELESS MOUSE

Before installing and using this product, please read the instructions thoroughly and retain them for future reference.

What's Included

• Wireless mouse
• One AAA battery
• Nano USB receiver
• Instruction manual

Setup

Step 1: Prepare Battery Compartment

Open the battery compartment by pressing down on the back of the mouse (A) then press and slide (B) forward. Remove the paper tab and insert the battery following the [+/- polarity] marked.

The diagram shows the underside of the mouse. Part A indicates pressing down on the back cover, and Part B indicates sliding it forward to open the battery compartment. Inside, a space for one AAA battery is shown with '+' and '-' markings for correct insertion.

Step 2: Turn the Mouse ON

Turn the mouse ON using the switch located on the underside.

The diagram shows the underside of the mouse with a switch labeled 'ON' and 'OFF'.

Step 3: Connect USB Receiver

Insert the USB receiver into a USB port on your computer. Wait up to 1 minute. Your mouse is now ready to use.

The diagram illustrates a USB receiver being plugged into a computer's USB port. An indicator shows '[up to 1 minute]' wait time.

Component Identification

The mouse features a left button, a right button, and a scroll wheel. It is designed with a comfortable ambidextrous design.

An illustration of the top of the wireless mouse, highlighting the left button, right button, and scroll wheel. Text indicates the design is comfortable and ambidextrous.

Changing the Battery

• Open the cover.
• Insert one AAA battery following the [+/- polarity] marked.

Note

• On some surfaces, the use of a mouse pad may be necessary.
• Turn the mouse OFF when travelling or not in use for long periods to conserve battery life.

System Requirements

• Windows 7/8/10/11, Mac OS X 10.10 or higher
• USB 2.0 port
• One AAA battery (included)

Specifications

Frequency: 2.4GHz

Operating distance: Up to 8m (26ft.)

DPI: 1200

Industry Canada Compliance (RSS 247)

This device contains a licence-exempt transmitter/receiver that complies with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference; and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

IC: 255A-8093559

The Source - Warranty

[Canada Flag] The Source warrants that this product will be free from defects in materials and workmanship for a period of twelve (12) months from the date of purchase. Within this period, simply take the product and your proof of purchase to any The Source store or participating dealer and the product will be replaced (where available) without charge. Any product which has been subject to misuse or accidental damage is excluded from this warranty.

This warranty is only applicable to a product purchased through The Source company-owned stores or participating dealers in Canada where the warranty is included with the product. While this warranty does not confer any legal rights other than those set out above, you may have additional statutory rights which will vary under the laws of the various countries, states, provinces and other governmental entities in which The Source operates. This warranty is subject to all statutory rights you may have in Canada.

Import and Manufacturing Information

Imported by: The Source, Barrie, Ontario, Canada, L4M 4W5

Manufactured in: China

Website: www.thesource.ca

© 2021 The Source. All rights reserved.

[Recycle Symbol]