DIZO_First brand in realme TechLife ecosystemDIZO_First brand in realme TechLife ecosystem
User Guide for DIZO models including: DA2001, 2AYPPDA2001, GoPods True Wireless Headphones, True Wireless Headphones
Realfit (Shenzhen) Intelligent Technology Co., Ltd. DA2001 DIZO GoPods 2AYPPDA2001 2AYPPDA2001 da2001
File Info : application/pdf, 1 Pages, 2.20MB
DocumentDocumentCheetah-DIZOGoPods-- 80g 88x68mm,616x68mm PANTONE Cool Gray 11C 1 Enter pairing mode Open up the charging case and press the button on the side for 3 seconds. 3s 10s Press and hold 10 seconds to factory reset. Bluetooth Available equipment DIZO GoPods 2 Connect earbuds Turn on Bluetooth on smartphone, connect to DIZO GoPods 3 Touch function Functioning area is in black circle. Touch twice to play or pause music, answer or end a call Touch three times to skip forward Press and hold 2 seconds on either side to decline an incoming call Press and hold 2 seconds on both sides to switch between noise controlling modes DIZO GoPods Connect Use with realme Link Download realme Link to explore more features. Noise Reduction Regular Transparency Game Mode Packaging List Earphone Eartips (S/M/L, M installed by default) Type-C charging cable User guide Basic Parameters Model: DA2001 Max power rate: 8dBm USB type C input: 5.0V 500mA Operation frequency: Bluetooth2402-2480MHz Temperature Description The headset shall be used under the environment with 0°C~45°C temperature and 45%~85% humidity, and the storage temperature shall be -20°C~35°C. The headset use will be affected and even the headset and battery may be damaged in case of too high or too low temperature. The headset shall be charged at 0°C~45°C which can be charged quickly at 15°C~45°C. The headset use will be influenced, and even the headset and battery may be damaged in case of too high or too low temperature when charging. Battery warning The built-in lithium battery of the product is forbidden to be disassembled, impacted, extruded or put into fire. The battery under the very low air pressure may result in explosion or flammable liquid or gas leakage. Avoid the battery in a high-temperature environment or being exposed to strong sunlight to avert explosion. Don't use the battery continuously in case of serious ballooning. The battery shall be handled pursuant to the local regulations and shall not be disposed as household garbage. Don't try to repair, remove or refit the battery. The explosion may happen if the battery is replaced by the one subject to incorrect model. Don't compress or puncture the battery with hard object. The battery leakage, overheating or outbreak of a fire may occur if the battery is destroyed. Don't listen to the voice under high sound pressure and high volume for a long time to prevent the possible hearing impairment when the headset is used. Disposal and Recycling Information This symbol (with or without a solid bar) on the device, batteries (included), and / or the packaging, indicates that the device and its electrical accessories (for example, a headset, adapter or cable) and batteries should not be disposed of as household garbage. FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help important announcement Important Note: Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. FCC ID: 2AYPPDA2001 Declaration of Conformity Hereby, Realfit (Shenzhen) Intelligent Technology Co., Ltd., declares that this device is in compliance with Directive 2014/53/EU.The full text of the EU declaration of conformity is available at the following internet address: http://www.dizo.net/eu-com pliance RF exposure information: The EIRP power of the device at maximal case is below the exempt condition, 20mW specified in EN62479: 2010. RF exposure assessment has been performed to prove that this unit will not generate the harmful EM emission above the reference level as specified in EC Council Recommendation(1999/519/EC). Realfit (Shenzhen) Intelligent Technology Co., Ltd. Room 201, building a, No.1 Qianwan 1st Road, Shenzhen Hong Kong cooperation zone, Qianhai, Shenzhen, Guangdong, China REV.1.0 0301000740 Warranty Thank you for purchasing DIZO products. We will provide comprehensive warranty services according to local laws and regulations. From more details about our warranty policy,please visit https://www.dizo.net. Matters Needing Attention: 1. When you buy the product, the sales unit will issue a valid proof of purchase. 2. The warranty card and the proof of purchase should be kept by the user properly, and it will not be replaced if lost. 3. If the product fails due to non-human factors, the user can present the warranty card and proof of purchase to the DIZO customer service center for free maintenance during the warranty period. Non-warranty situation: This warranty does not cover the following cases: 1. Out of warranty period. 2. Damage caused by use not in accordance with the instructions. 3. Damage caused by man-made causes. 4. Failure caused by unauthorized disassembly, maintenance, or modification of the product. 5. Damage caused by force majeure factors (such as floods, earthquakes, lightning, etc.). 6. There is no warranty card, invoice, or warranty card that does not match the invoice information. 7. The product wears naturally. 8. Other failures and damages that are not caused by the quality of the product itself. Website : www.dizo.net Warranty Card (Stub Copy) Dear user, thank you for using the product of our company. Please read and keep properly the warranty card after purchasing the product so that we can provide better services to you. User Information User's name Phone Number Address Email Product Information Product Model Product Serial Number Sales Information Purchase Date Invoice Number Sales Unit Phone Number Address Warranty Card (Customer Copy) Dear user, thank you for using the product of our company. Please read and keep properly the warranty card after purchasing the product so that we can provide better services to you. User Information User's name Phone Number Address Email Product Information Product Model Product Serial Number Sales Information Purchase Date Invoice Number Sales Unit Phone Number Address . XXXXXXXXXXXX XXX-XXX-XXXXXXX Complies with IMDA standards XXXXXXXX DIZO GoPods User Guide RE-PKG-002 V2.0 DIZO GoPods 98+ + V2.0 2021.03.23 Jimmy JIA Eric +/++ 0.1mm ±0.5mm DIZO