Oghrti Tablet Manual

Table of Contents

• Function Overview
• Getting Started
• Home Screen
• Setting Basics
• Network Connection
• App Management
• Internet Navigation
• Multimedia
• Specification
• Troubleshooting
• Guarantee

Function Overview

This section provides a general overview of the tablet's functions.

Getting Started

Before powering up the tablet, ensure that it is fully charged.

Device Components:

• 1. Reset Button
• 2. Power On/Off Button
• 3. Volume + Button
• 4. Volume - Button
• 5. USB Type-C Interface
• 6. 3.5mm AUX Slot
• 7. 2.0MP Front-facing Camera
• 8. Double Speaker
• 9. 5.0MP Back Camera
• 10. Lights Flash

Power On/Off

Press and hold the power button for 2-3 seconds to turn on your tablet. Select your language and set up your tablet following the start guide.

To turn off: Press and hold the power button for 2 seconds, then release. 'Power Off' and 'Restart' will appear on the screen. Tap 'Power Off' to turn off the tablet.

For a forced shutdown when the tablet is frozen, press and hold the power button for 5 seconds.

Battery

The tablet has a rechargeable Li-ion battery. It is suggested to drain the battery completely once a month if the tablet is used only occasionally. Do not dispose of the tablet in a fire.

Sleep Mode

Press the power button once to switch the tablet to Sleep Mode when it is ON. Press again to wake it up.

Tip: Go to Settings > Display > Sleep to set the time for Sleep Mode.

Home Screen

Icons on the Bottom Menu:

• 1. Back
• 2. Home Screen
• 3. Recent Activities
• 4. Apps Collection

Quick Settings

Swipe down from the top of the screen to access Quick Settings. You can control Wi-Fi, Bluetooth, Do Not Disturb mode, screen orientation, Battery Saver, and Airplane Mode.

Wallpapers, Widgets and Home Settings

Tap and hold an empty section of a Home screen to access WALLPAPERS, WIDGETS, and HOME SETTINGS.

• Tap WALLPAPERS to change the current wallpaper.
• Tap WIDGETS, touch and hold any widget (e.g., Clock), then slide to add it to a Home screen. Remove it by sliding to X.
• Tap HOME SETTINGS to enable/disable adding icons to the Home screen for new apps installed from the Play Store.

Setting Basics

Access detailed settings by swiping down from the top of the screen and tapping the settings icon, or by tapping the Setting icon on the Home screen.

Network & Internet

• Connect to any working Wi-Fi.
• Enable/disable Airplane Mode.
• Monitor data usage.

Connected devices

• Turn on/off Bluetooth.
• Pair with Bluetooth devices and view paired devices.
• Cast device and check the cast device.
• Add and check printers.

Apps & notifications

• Check recently opened apps and all apps on the tablet.
• Set app permissions.
• Uninstall third-party apps.
• Adjust app notification settings.
• Clear app cache.

Battery

• Display remaining battery percentage.
• Enable/disable Battery Saver.
• Adjust the time of entering Sleep Mode.

Display

• Adjust screen brightness.
• Adjust font size and display size.
• Set a Screensaver.
• Change the wallpaper.
• Adjust the time of entering Sleep Mode.

Sound

• Set volume levels for media, alarms, and notifications.
• Set Do Not Disturb preferences.
• Set notification and alarm sounds.
• Turn on/off sound for screen lock, charging, and touch.

Screenshot

• Set the delay time for screenshots.
• Set the location folder for screenshots.
• Enable/disable the screenshot button in the status bar.

Tip: Press the volume down button and the power button together to capture a screenshot. Alternatively, enable the screenshot button in the status bar and tap the icon on the bottom menu.

Storage

View and manage your storage space.

Security & location

• Set screen lock (pattern, password, PIN, swipe).
• Enable/disable notifications when the screen is locked.
• Enable/disable location services for specific apps.
• Set to show/hide passwords when inputting.

Users & accounts

Add and manage user accounts.

Accessibility

Manage settings for users with vision or hearing impairments, including screen readers and subtitles.

Google

Set preferences for Google-related services.

System

• Set Language: Go to Settings > Languages & input > Languages > Add language. Hold and slide to change the language.
• Restore factory settings: Tap Reset options > Erase all data (factory reset).
• Set date and time.
• Enable/disable backup.
• View detailed tablet information.

Network Connection

Go to Wi-Fi settings in the Settings interface or enter Quick Settings.

Wi-Fi Connection

1. Tap Network & Internet and turn on Wi-Fi. All available Wi-Fi connections will be listed.
2. Select your Wi-Fi and input the correct password.

Bluetooth Pairing

Ensure Bluetooth is turned on for both your tablet and your Bluetooth device.

1. Tap Connected devices and turn on Bluetooth.
2. Tap Bluetooth > +Pair new device to enter the scanning interface. Available devices will be displayed.
3. Tap the desired device to get a pairing code and click PAIR on both devices. Automatic connection may apply to some devices.

App Management

App Download and Installation

1. Tap and open the Play Store on the Home screen.
2. Log into your Google account, search, and download the desired app.

App Management

• Move the App: Tap and hold the app, then slide it to a desired screen.
• Remove the App from Home Screen: Tap and hold the app, then slide to X.
• Uninstall the App: Tap and hold the app, then slide to the trash bin.
• Clear the Cache of the App: Go to Settings > Apps & notifications > Select an App > Storage > CLEAR CACHE.

Internet Navigation

Ensure the tablet is connected to a working Wi-Fi network before navigating the internet. Use the pre-installed Chrome™ browser or another downloaded browser.

Multimedia

Connecting to the Computer

1. Connect your tablet to the computer using a USB cable and go to Quick Settings.
2. Tap Android™ System > USB charging this device > More options > Use USB to.
3. Select Transfer files.
4. On your computer, find your tablet (e.g., TAB30) to transfer files between the tablet and computer.

Tip: Select 'Charging this device' to charge your tablet or 'Transfer photos (PTP)' to transfer photos.

Specification

Connecting to an External Device

1. Install a micro SD card into the micro SD card slot and go to Quick Settings.
2. Tap 'New micro SD card detected' or the 'Set Up' prompt.
3. Set the micro SD card as portable storage by selecting 'Use as portable storage'. Access the micro SD Card storage to move files between the card and tablet.

Troubleshooting

Q1. The tablet doesn't power on.

• Reboot the tablet after charging for 30 minutes.
• Press the power button to check if the tablet is in Sleep Mode.
• Press and hold the power button for 5s to turn on the tablet, then reboot it.
• Press the Reset button with a pin to reboot the tablet.

Q2. The tablet doesn't charge.

• Ensure the USB cable is properly plugged into the charging port.
• Try another compatible USB cable and adapter.

Q3. Error message occurs during operation.

• Uninstall the app with the error message, then download and install it again.
• Press the Reset button with a pin to reboot the tablet.

Q4. The tablet cannot be detected by the computer.

• Ensure the tablet is powered on.
• Try another USB cable.
• Try another USB port on the computer.
• When connecting to the computer, select 'Transfer files' or 'Transfer photos (PTP)' instead of 'Charge this device'.

Q5. The tablet cannot connect to Wi-Fi.

• Ensure the tablet's Wi-Fi is turned ON.
• Ensure the correct password was entered when connecting to Wi-Fi.
• Restart the router.
• Check the router settings for any filter settings or device connection limitations.
• Forget the current Wi-Fi connection, reset the router, and connect to Wi-Fi again.

Q6. The storage space of the tablet is not enough.

• Delete unused apps.
• Clear app cache regularly.
• Install a microSD card to expand storage.

Guarantee

Keep this card for warranty.

Guarantee Item

1. Within 1 month from the date of purchase, if there is a functional problem, the same item subject to goods and packing maintenance will be offered.
2. Within 1 year from the date of purchase, the goods will be guaranteed for repair (excluding fittings).
3. Guarantee service is subject to normal usage.
4. Damage caused by man-made actions (opening the housing, tearing off stickers, abnormal usage), or loss of this card, will void the guarantee.

FCC Compliance Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.

Specific Absorption Rate (SAR) Information:

This Communicator meets the government's requirements for exposure to radio waves. The guidelines are based on standards developed by independent scientific organizations through periodic and thorough evaluation of scientific studies.

The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement: The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: Communicator has also been tested against this SAR limit. This device was tested for typical body-worn operations with the back of the phone kept 10mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 10mm separation distance between the user's body and the back of the phone. The use of belt clips, holsters, and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements and should be avoided.