Installation Guide for DUALTRON models including: New EY3 Personal Mobility, New EY3, Personal Mobility, Mobility
5. To turn, shift your body and turn the handlebar slightly. * Please watch out for road conditions, sufficient turning space is required. 3. Put both feet on the footboard and stand stably. Pull the throttle to speed up. When hard braking, serious danger or injury may occur.
Minimotors France
eagle Personal Mobility PRODUCT MANUAL Pictures for reference only, subject to our existing products. Diagram And Functions New EY3 Bell Handlebar cover Handlebar bracket Handlebar Functions Handle post(Steering tube) LED lamp button Name Function Operation method Warning light button QR lever locking slide Front fender Front suspension Folding bracket Rear fender Kick stand Front motor Disc Power button Front lamp 10inch wide tube tire Charging port 01 Specifications Product Battery Rider Display Motor Machine Item Model Battery Capacity Range Charging Ambient Temperature Battery Management System Max. load Recommended Age Required Height Type Motor Type Nominal Power Net Weight Max. Slope Drive System Speed Length × Width × Height Folded: Length × Width × Height Wheelbase Ground Clearance Traversable Terrain Operating Temperature Storage Temperature 02 Parameter Specifications Brake Charger Tire Suspension Machine Brake Electric Brake Input Voltage Max. Output Voltage Type Tire Pressure Material Type Optional *Disclaimer: this is not a legal opinion or legal advice. The information provided herein (including in the App) is for your convenience and information purpose only. It is not intended to cover every piece of law and/or regulation that may be applicable to this product. DUALTRON explicitly hereby disclaims any and all warranty and/or representation, express or implied, related to completeness, accuracy, up-to-date of such information. DUALTRON reserves the right but not obligation to correct, implement and/or update the information. You shall use the information at your own risk. It is your sole responsibility to learn and understand any and all the law and/or regulation, requirements, prohibition, restriction and/or limitation imposed by either law, government authority, court, private party or the others that may apply to your use of this product. *Theoretical Range: tested while riding with a full battery, 75 kg load, 25°C, at the speed of 25 km/h on average on pavement. *Typical Range: tested while riding with a full battery, 75 kg load, 25°C, at the speed of 50 km/h on average on pavement. (Some of the factors that affect range include speed, number of starts and stops, ambient temperature, etc. ) *Max.Speed: tested while riding with a full battery,75kg load,25°C,straight road on flat road with no wind. (Some environmental factors can affect max speed,uneven roads, crooked roads, temperature, wind, etc.) 03 Packing List 04 Accessories Battery charger x1 Screw Cap x 2 screw x 2 Manual Multitool x 1 Folding Bracket Bluetooth Connection APP Download Guide Method 1 Method 2 Android iphone 1.Scan the QR code to download the APP. 2.Choose the mobile phone system that suits you to install,and register / log in. Pair the Bluetooth on the APP Dualtron 4 5 P M Search vehicle 1.Search "DUALTRON" in the application and download it, and register / log in. sure Power on the scooter. Click "Search vehicle" and pair with your scooter. * The scooter is connected to the Dualtron app when the Bluetooth symbol lights up. Select "bind as owner". (No one else can connect, only people authorized by you are allowed to connect. Authorizations are created on the app.) 05 Assembly QR lever Locking slide 31 4 2 Release the QR lever,raise the locking slide upwards, raise the steering tube, then lower the locking slide downward. Tighten the finishing screw properly to lock the QR lever so that the locking slide is firmly fixed in any direction, and check for looseness during use. 06 Attach the handlebar body and tighten the 4 screws.(When tightening the screw,the first step screw is 90% tight,you must tighten it diagonally,according to the order 1-4-2-3;The second step all screws are 100% tightened.) How to Ride 1. Power on the scooter and choose the speed mode. * Please choose the speed mode before riding! Note:Speed mode can be choose via the Dualtron app. 2. Stand on the footboard with one foot and push off with the other foot to start gliding. *Make sure you have disabled SAFE mode.(SAFE mode setting via Dualtron app.Deactivate safe mode by squeezing brake lever.) 3. Put both feet on the footboard and stand stably. Pull the throttle to speed up. 4. Slow down by releasing the throttle and squeezing brake levers. 5. To turn, shift your body and turn the handlebar slightly. * Please watch out for road conditions, sufficient turning space is required. When hard braking, serious danger or injury may occur. Maintain a moderate speed and look out for potential hazards. 07 Folding QR lever Loosen the QR lever, push the locking slider inward and fold the handlebars down. Locking slide Lay the steering tube down while raising the locking slide. 08 Loosen the QR lever and move the locking slide upward. You must hold the steering tube with your hand to prevent falling down and hitting. Hook Lock the handlebar hook to the footrest. Ensure that lock the handlebar when lift scooter.Adobe PDF library 17.00 Adobe Illustrator 28.5 (Windows)