GRUNDTAL Wall Drying Rack
The GRUNDTAL is a wall-mounted drying rack designed by IKEA. It offers a practical solution for drying laundry or storing items, with an adjustable length for versatile placement.
Important Safety Information
- Assembly should be performed by a qualified person. Incorrect assembly can lead to the unit toppling or falling, causing personal injury or damage.
- Note: Screws and fittings for wall/ceiling attachment are not included. Select screws and fittings appropriate for your wall/ceiling material and ensure they have sufficient holding power. Consult a specialized retailer if uncertain.
What's Included & Tools Needed
Included Parts
- 1x Allen key (part number 100001) ?
- 12x Screws (part number 121189) ?
Tools Required
- Screwdriver ?
- Spirit Level ?
- Pencil ✏️
Assembly Steps
Step 1: Prepare Bracket
Take one bracket and one rod. Insert the rod into the designated hole on the bracket and secure it using one screw (part 121189) and the Allen key (part 100001).
Step 2: Attach Rods
Attach the remaining four rods to the same bracket, using four screws (part 121189) and the Allen key.
Step 3: Attach Second Bracket
Attach the second bracket to the other end of the five rods, using five screws (part 121189) and the Allen key.
Step 4: Adjust Length
Extend or retract the assembled rack to the desired length, which can range from 67 cm to 120 cm (26 2/4" to 47 1/4"). Exercise caution when adjusting telescopic parts ?.
Step 5: Prepare for Mounting
Hold the rack against the wall at the desired height. Use a pencil ✏️ to mark the mounting holes. Ensure the rack is level ?. Drill holes in the wall at the marked points.
Step 6: Mount to Wall
Secure the GRUNDTAL drying rack to the wall using appropriate screws and wall anchors (not included). Two people are recommended for mounting.
Dimensions
Adjustable length: 67 cm – 120 cm (26 2/4" – 47 1/4").