Sustainable LED lighting solutions | Philips lighting
Owner's Manual for PHILIPS models including: BGP390 LumiStreet gen2 Light, BGP390, LumiStreet gen2 Light, gen2 Light, Light
2 days ago — Increasing numbers of municipalities are having to upgrade large-scale conventional street lighting installations with energy efficient LED technology.
File Info : application/pdf, 3 Pages, 368.13KB
DocumentDocumentLighting LumiStreet gen2 BGP390 LED50-1F/740 I DM10 48/60S LumiStreet Pro gen2 Nano, LED module 5000 lm, LED, 31 W, Power supply unit with DALI interface, Distribution medium 10, Flat glass, 157° - 33° x 55°, DALI, Side-entry for diameter 48 to 60 mm Increasing numbers of municipalities are having to upgrade large-scale conventional street lighting installations with energy efficient LED technology. But they are having to do this with smaller and smaller budgets. That's why the new generation of LumiStreet has been upgraded and designed to provide a solution to this challenge, it is the ideal solution for performing point-to-point replacement of conventional lighting. LumiStreet gen2 achieves this by offering high efficiency, low Total Cost of Ownership, and ease of installation and maintenance. The ease of installation and maintenance is enabled by the Philips Service tag. Moreover, the Philips SR (System Ready) socket makes it future-ready and you can pair this luminaire with lighting control and software applications such as Interact City. Product data General Information Lamp family code Light source replaceable Number of gear units Driver included Light source engine type Product family code Lighting Technology Value ladder CE mark Warranty period LED50 [LED module 5000 lm] Yes 1 unit Yes LED BGP390 [LumiStreet Pro gen2 Nano] LED Specification Yes 5 years Flammability mark ENEC mark EU RoHS compliant Light Technical Upward light output ratio Luminous Flux Standard tilt angle posttop Standard tilt angle side entry Correlated Color Temperature (Nom) For mounting on normally flammable surfaces ENEC plus mark Yes 0 4,100 lm 0° 0° 4000 K Datasheet, 2024, March 14 data subject to change LumiStreet gen2 Luminous Efficacy (rated) (Nom) Color rendering index (CRI) Light source color Optical cover type Luminaire light beam spread Optic type outdoor 132 lm/W >70 740 neutral white Flat glass 157° - 33° x 55° Distribution medium 10 Operating and Electrical Input Voltage 220 to 240 V Line Frequency 50 to 60 Hz Average CLO power consumption - W Inrush current 18 A Inrush time 0.28 ms Power Consumption 31 W Power Factor (Fraction) 0.98 Connection 2 Push-in connector 5-pole Cable - Number of products on MCB of 16 A type B 30 Temperature Ambient temperature range -40 to +50 °C Controls and Dimming Dimmable Driver/power unit/transformer Control interface Constant light output Yes Power supply unit with DALI interface DALI No Mechanical and Housing Housing Material Reflector material Optic material Optical cover material Fixation material Housing Color Mounting device Optical cover shape Optical cover finish Overall length Overall width Overall height Aluminum Polycarbonate Polymethyl methacrylate Glass Aluminum Gray Side-entry for diameter 48 to 60 mm Flat Clear 379 mm 232 mm 92 mm Effective projected area Dimensions (Height x Width x Depth) 0.02274 m² 92 x 232 x 379 mm Approval and Application Ingress protection code Mech. impact protection code Surge Protection (Common/Differential) Sustainability rating Protection class IEC IP66 [Dust penetration-protected, jetproof] IK08 [6 J] Luminaire surge protection level until 6 kV differential mode and 8 kV common mode Lighting for circularity Safety class I Initial Performance (IEC Compliant) Luminous flux tolerance Initial chromaticity Power consumption tolerance Init. Color Rendering Index Tolerance +/-7% (0.38, 0.38) SDCM <5 +/-10% +/-3 Over Time Performance (IEC Compliant) Control gear failure rate at median useful 10 % life 100000 h Lumen maintenance at median useful life* L96 100000 h Application Conditions Performance ambient temperature Tq Maximum dim level 25 °C 0% (digital) Product Data Order product name Full product name Full product code Order code Material Nr. (12NC) Numerator - Quantity Per Pack EAN/UPC - Product/Case Numerator - Packs per outer box EAN/UPC - Case BGP390 LED50-1F/740 I DM10 48/60S BGP390 LED50-1F/740 I DM10 48/60S 871951462782600 910925868722 910925868722 1 8719514627826 1 8719514627826 Datasheet, 2024, March 14 2 data subject to change LumiStreet gen2 Dimensional drawing Ø 32-48 Ø 32-48 Ø 48-60 379 Ø 48-60 70100 232 70-100 92 144 425 © 2024 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. www.lighting.philips.com 2024, March 14 - data subject to change