PulseAudio PA-EARCX HDMI Audio Extractor

Dear Customer

Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.

THIS PRODUCT IS 100% INSPECTED AND TESTED IN THE UNITED STATES TO VERIFY PERFORMANCE PARAMETERS.

WARNING

• Do not install or place this unit in a built-in cabinet, or other confined space without adequate ventilation.
• To prevent risk of electrical shock or fire hazard, due to overheating do not obstruct unit's ventilation openings.
• Do not install near any source of heat, including other units that may produce heat.
• Do not place unit near flames.
• Only clean unit with a dry cloth.
• Unplug unit during lightning storms or when not used for an extended period of time.
• Protect the power cord from being walked on or pinched, particularly at the plugs.
• Use unit only with accessories specified by the manufacturer.
• Refer all servicing to qualified personnel.

Features

The PulseAudio PA-EARCX is an HDMI audio extractor which can de-embed or break out audio from an HDMI 4K HDR display equipped with Audio Return Channel (ARC) and/or Enhanced Audio Return Channel (eARC). Break out audio from the HDMI signal to a soundbar, A/V Receiver, or amplifier without affecting the HDMI 2.0 output to the main display. Features two HDMI outputs, one for video capable of passing 18 Gbps, 4K@60Hz with HDR content, while the second HDMI output is dedicated for extracting ARC/eARC audio. For extracting audio from the latest 4K and eARC components, the PA-EARCX is the perfect solution.

HDMI Audio Extractor with eARC

Part # PA-EARCX

• Extracts audio signals from an HDMI source signal
• Supports Enhanced Audio Return Channel (eARC) and ARC
• Passes 4K@60Hz 4:4:4 resolution
• Supports HDR (High Dynamic Range) with HDR10, HDR10+, Dolby Vision formats
• Dolby and DTS format pass-through such as Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio
• HDMI 2.0b and HDCP 2.3 compliant
• Supports 18Gbps video bandwidth
• Built-in Equalizer
• Support CEC functionality
• Advanced EDID management
• Dimensions: 2.5" W x 2.75" D x 1.5” Η (65mm W x 70mm D x 27mm D)

Package Contents

• (1) PulseAudio PA-EARCX Audio Extractor
• (1) USB Cable (USB-A to Micro USB)
• (1) USB Power Adapter
• (1) Product Manual

Specifications

Panel Descriptions

The device features several ports and switches for operation. The diagrams show the rear and front panels.

Rear Panel:

• PWR (Power LED): Illuminates red when powered on.
• DC 5V: Port for connecting the included 5V power supply or USB adapter.
• eARC Switch: Dip switch to turn eARC functionality on/off.
  • ON: Audio output 2 (OUT 2) carries eARC/ARC audio from the display.
  • OFF: Audio output 2 (OUT 2) carries audio from the HDMI source (INPUT).
• EDID Switch: Dip switch to adjust for compatibility issues.
  • Setting to "OUT1" or "OUT2" copies the corresponding EDID from the connected device.
  • If copying fails, it uses the internal EDID of the default 1080p 2CH format.
• INPUT (Port 5): Connect to an HDMI source.

Front Panel:

• eARC/ARC OUT 1 (Port 6): Connect to an HDMI display with eARC and/or ARC. Note: Ensure connection to the display's designated ARC/eARC port and verify the feature is activated in the display's menu.
• AUDIO OUT 2 (Port 7): This output extracts/de-embeds audio. Connect to a soundbar, A/V receiver, or external amplifier.

Connect and Operate

Follow these steps to connect and operate the PA-EARCX:

1. Connect an HDMI source to the HDMI input port.
2. Connect an eARC/ARC enabled HDMI display to HDMI Output 1 (eARC/ARC OUT 1).
3. Connect a soundbar, A/V receiver (AVR), or external amplifier to HDMI Output 2 (AUDIO OUT 2) for audio only.
4. Select the EDID to be copied from Output 1 or Output 2 using the EDID switch.
5. Connect the included USB power cable and adapter to the DC 5V port.

After connecting power:

• Check for correct video and audio formats on the display.
• Verify that audio extraction is outputting the desired format.

NOTE: CEC and eARC/ARC functionality must be enabled on your HDMI display for the product to work correctly. Reference the user manual of your HDMI display to enable eARC/ARC.

Diagram Description: The connection diagram illustrates a typical setup where an HDMI source is connected to the PA-EARCX INPUT. The eARC/ARC OUT 1 port connects to a TV with ARC functionality, and the AUDIO OUT 2 port connects to an amplifier.

Safety and Notice

The PA-EARCX has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipment, the PA-EARCX should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.

• Follow all instructions and warnings marked on this unit.
• Do not attempt to service this unit yourself, except where explained in this manual.
• Provide proper ventilation and air circulation and do not use near water.
• Keep objects that might damage the device and assure that the placement of this unit is on a stable surface.
• Use only the power adapter and power cords and connection cables designed for this unit.
• Do not use liquid or aerosol cleaners to clean this unit.
• Always unplug the power to the device before cleaning.

Technical Support

In case of problems, please contact Vanco Technical Support by dialing 1-800-626-6445. You can also email technical support issues to techsupport@vanco1.com. When calling, please have the Model Number, Serial Number (affixed to the bottom of the unit) and Invoice available for reference during the call. Please read this Instruction Manual prior to calling or installing this unit, since it will familiarize you with the capabilities of this product and its proper installation. All active electronic products are 100% inspected and tested to insure highest product quality and trouble-free installation and operation. The testing process utilizes the types of high-definition sources and displays typically installed for entertainment and home theatre applications. For additional information please visit www.vanco1.com.

Liability Statement

Every effort has been made to ensure that this product is free of defects. The manufacturer of this product cannot be held liable for the use of this hardware or any direct or indirect consequential damages arising from its use. It is the responsibility of the user and installer of the hardware to check that it is suitable for their requirements and that it is installed correctly. All rights are reserved. No parts of this manual may be reproduced or transmitted by any form or means electronic or mechanical, including photocopying, recording or by any information storage or retrieval system without the written consent of the publisher. Manufacturer reserves the right to revise any of its hardware and software following its policy to modify and/or improve its products where necessary or desirable. This statement does not affect the legal rights of the user in any way.

Limited Warranty

With the exceptions noted in the next paragraph, Vanco warrants to the original purchaser that the equipment it manufactures or sells will be free from defects in materials and workmanship for a period of two years from the date of purchase. Should this product, in Vanco's opinion, prove defective within this warranty period, Vanco, at its option, will repair or replace this product without charge. Any defective parts replaced become the property of Vanco. This warranty does not apply to those products which have been damaged due to accident, unauthorized alterations, improper repair, modifications, inadequate maintenance and care, or use in any manner for which the product was not originally intended.

Items integrated into Vanco products that are made by other manufacturers, notably computer hard drives and liquid crystal display panels, are limited to the term of the warranty offered by the respective manufacturers. Such specific warranties are available upon request to Vanco. A surge protector, power conditioner unit, or an uninterruptible power supply must be installed in the electrical circuit to protect against power surges.

If repairs are needed during the warranty period the purchaser will be required to provide a sales receipt/sales invoice or other acceptable proof of purchase to the seller of this equipment. The seller will then contact Vanco regarding warranty repair or replacement.

Contact Information

Vanco International

506 Kingsland Drive Batavia, Illinois 60510

Call: 800.626.6445 | Fax: 630.879.9189

Visit: www.vanco1.com

A brand from VANCO. Learn more at vanco1.com