Introduction and Important Information
This document provides assembly instructions for the TecTake cabinet. Please read all instructions carefully before beginning assembly. Retain these instructions for future reference.
Languages included: English (EN), German (DE), French (FR), Spanish (ES).
Retention Notice:
- RETAIN FOR FUTURE REFERENCE
- FÜR KÜNFTIGE VERWENDUNG AUFBEWAHREN
- A CONSERVER POUR UNE UTILISATION FUTURE
- CONSERVAR PARA SER LEÍDO POR CADA NUEVO USUARIO, ANTES DE UTILIZAR EL ARTÍCULO POR PRIMERA VEZ
Manufacturer Address: TecTake GmbH, Tauberweg 41, D-97999 Igersheim, Germany.
Parts List
| Part Label | Description | Quantity |
|---|---|---|
| A | Side Panel (Tall, narrow) | 1pc |
| B | Side Panel (Tall, narrow) | 1pc |
| C | Side Panel (Tall, narrow) | 1pc |
| D | Side Panel (Tall, narrow) | 1pc |
| E | Shelf Support/Rail | 1pc |
| F | Shelf Support/Rail | 1pc |
| G | Top Panel | 1pc |
| H | Bottom Panel | 1pc |
| I | Shelf | 4pcs |
| J | Door | 1pc |
| K | Lock Mechanism | 1pc |
| L | Screw (ST5X12) | 30pcs |
| M | Keys | 1pc |
| N1 | Connector/Dowel | 2pcs |
| N2 | Connector/Dowel Base | 1pc |
| O | Cam Lock/Connector | 2pcs |
| P | Shelf Pin/Support | 16pcs |
Assembly Step 1
Diagram shows panel A being attached to panel B. Use 3x screws (L) to secure panel A to panel B.
Assembly Step 2
Diagram shows panels C and D being attached to the structure assembled in Step 1. Use 6x screws (L) to secure panels C and D.
Assembly Step 3
Diagram shows the back panels (implied) being attached to the frame. Screws (F) are shown being inserted into pre-drilled holes on the frame edges to secure the back panels.
Assembly Step 4
Diagram shows the top panel (G) and bottom panel (H) being attached to the main cabinet structure. Use 9x screws (L) for this step. Shelf supports (E) are also shown being attached to the side panels.
Assembly Step 5
Diagram shows shelves (I) being inserted into the cabinet. Shelf pins (P) are used to support the shelves. The diagram also indicates the use of 12x screws (L) for securing internal components or shelf supports. Cam locks (O) and connectors (N1, N2) are also shown, likely for connecting panels or shelves.
Assembly Step 6
Diagram shows the doors (J) being attached to the cabinet frame. The lock mechanism (K) is installed on one of the doors. Components N1 and N2 are shown being connected, likely as part of the locking or door mounting system.
