ERNI-MiniBridge Male Angled SMT 06p Connector
Part Number: C-214013-E
Brand: TE Connectivity
Packaging Information
Packaged in tape on reel according to DIN IEC 60286-3.
Packaging unit: 1000 pcs.
Reel off direction: [arrow pointing right]
Dimensions:
- Overall diameter of reel: ⌀330 mm
Performance and Contact Specifications
Performance level: 1
Mating area: Gold plating
Terminal area: Tin plating 4-6 µm
Coplanarity of termination: ≤ 0.1 mm
Note 1: Valid for use with mating female connector 90° in SMT version.
PCB Layout Information
PCB-Layout for SMT (Surface Mount Technology).
Restricted area for conductors, valid for use by mating female connector 90° in IDC version.
Dimensions:
| Contact marking | 12.7 mm |
| Center-to-center spacing: | 5 x 1.27 mm = 6.35 mm |
| Pitch: | 1.27 mm |
| Overall width: | 11.8 mm |
| Height (max): | 7 mm (max. 0.2 mm to board edge) |
| Width (max): | 8.5 mm |
| Terminal width: | 1.2 mm |
| Terminal length: | 2.6 mm |
| Terminal thickness: | 0.3 mm |
| Drill diameter: | ⌀ 1.6 mm |
| Contact marking at Pin 1: | 10.77 ±0.03 mm |
| Coplanarity of termination: | ≤ 0.1 mm |
General Information
Customer Drawing: This Drawing is a controlled Document. Subject to modification without prior notice. Drawing will not be updated.
Dimensions in mm
Scale: 5:1
Material: [Not Specified]
Drawing Index: h1
Date: 21.05.2023
Class: A3
Subclass: SRCA
Document Notes
The German version of this drawing has been offered for convenience only and may deviate from the English original. In case of any deviation, the English version shall prevail.
Reproduction, distribution, and utilization of this document, as well as communication of its contents to others without express authorization, is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model, or design.
