file:///C:/Users/treuveni/Documents/Rebrand%20PPTs/Word/Cognyte/cognyte.com/intellectualpropertynoticefile:///C:/Users/treuveni/Documents/Rebrand%20PPTs/Word/Cognyte/cognyte.com/thirdpartylicense
One moment, please...One moment, please...
User Guide for Cognyte models including: 2A7A2-S1, 2A7A2S1, S1 FalcoNet Series 1 Module, S1, FalcoNet Series 1 Module, Module
Cognyte Software LP S1 2A7A2-S1 2A7A2S1 s1
File Info : application/pdf, 13 Pages, 771.24KB
DocumentDocumentFalcoNet Series 1 Module User Guide Revision 1.2, September 2022 © 2021, 2022 Cognyte Software Ltd. All Rights Reserved Worldwide. Confidential and Proprietary Information of Cognyte Software Ltd. All materials (regardless of form and including, without limitation, software applications, documentation, and any other information relating to Cognyte, its products or services) are the exclusive property of Cognyte Software Ltd Only expressly authorized individuals under obligations of confidentiality are permitted to review materials in this document. By reviewing these materials, you agree to not disclose these materials to any third party unless expressly authorized by Cognyte, and to protect the materials as confidential and trade secret information. Any unauthorized review, retransmission, dissemination or other use of these materials is strictly prohibited. If you are not authorized to review these materials, please return these materials (and any copies) from where they were obtained. All materials found herein are provided "AS IS" and without warranty of any kind. Cognyte Software Ltd does not warrant, guarantee or make any representation regarding the use or the results of the use of the information, links, tools, and materials in terms of the accuracy, reliability, quality, validity, stability, completeness, correctness, or otherwise of its content or products. The entire risk as to the use, results and performance of information, links, tools and materials provided or referenced herein is assumed by the user. Cognyte Software Ltd shall not be liable for damages resulting from the use, misuse or unlawful use of the information, links, tools, and materials contained or referenced herein. Any third party technology that may be appropriate or necessary for use with the Cognyte Product is licensed to you only for use with the Cognyte Product under the terms of the third party license agreement specified in the Documentation, the Software or as provided online at www.cognyte.com/thirdpartylicense. You may not take any action that would separate the third party technology from the Cognyte Product. Unless otherwise permitted under the terms of the third party license agreement, you agree to only use the third party technology in conjunction with the Cognyte Product. The Cognyte Software Ltd products are protected by one or more U.S., European or International Patents and other U.S. and International Patents and Patents Pending. All marks referenced herein with the ® or TM symbol are registered trademarks or trademarks of Cognyte Software Ltd or its subsidiaries. All rights reserved. All other marks are trademarks of their respective owners. Please visit our website at www.cognyte.com/intellectualpropertynotice for updated information on Cognyte Intellectual Property. Table of Contents 1 INTRODUCTION ..................................................................................................................... 2 2 SERIES 1 MODULE OVERVIEW................................................................................................. 3 3 HARDWARE CONFIGURATION ................................................................................................ 4 Interfaces ............................................................................................................................................................ 4 4 SOLUTIONS ............................................................................................................................ 6 Antenna solution................................................................................................................................................. 7 5 RF EXPOSURE INFORMATION ................................................................................................. 9 6 FCC INFORMATION .............................................................................................................. 10 Supplier's Declaration of Conformity 47 CFR § 2.1077 Compliance Information ............................................. 10 FCC Compliance statement subject to Part 15.105 .......................................................................................... 10 TDD Hardware Guide Page a 1 Introduction This document is designed to provide the user with hardware information on the FalcoNet Series 1 box solution. Series 1 User Guide Page 2 2 Series 1 Module Overview The Series 1 Module solution is an LTE base station. Basic Specifications + Length 563mm + Width 200mm + Height 86mm + Weight: Approx. 5Kg + Target output power on unit connector 33 dBm (+/-1) Electrical Specifications Power Input + 36V for Vehicle solution - provided from DC APM + 24V for Desktop solution provided from AC-DC power supply Consumption + 152W Typical + 380W Max Supported LTE bands Band Band 41 (TDD 2500) Frequency 2496-2690 MHz Series 1 User Guide Page 3 3 Hardware Configuration Interfaces No. Interface 1 Power IN 2 TX/RX 3 LAN 4 LAN 5 GPS 6 CLOCK 7 1PPS 8 ON/OFF Switch Designation From PSU/APM To Ext Omni/Directional Antenna To Laptop or FalcoNet To Laptop or FalcoNet To External GPS Antenna Not connected Not connected System ON/OFF Description 4 way Amphenol Connector QN-type Connector Standard RJ45 socket Standard RJ45 socket Standard SMA Female Standard SMA Female Standard SMA Female Push Button with LED Series 1 User Guide Page 4 Back view Front view Series 1 User Guide Page 5 4 Solutions There are two design solutions: 1. Standalone for desktop solution 2. Rack mounted for vehicle solution Standalone Series 1 User Guide Page 6 Rack mounted Series 1 Module Series 2 Module APM FalcoNet Antenna solution Series 1 module can be configured for two solutions 1. Directional Antenna on tripod 2. Omnidirectional Antenna for vehicle installation Directional Antenna on tripod + Freq. Range - 698-960MHz, 1710-2700MHz + Gain - 6-9 dBi + Impedance - 50Ohm + Max. Input Power - 100 Watts + Polarisation - Vertical Series 1 User Guide Page 7 Omnidirectional Antenna for vehicle installation + Freq. Range - 698-960MHz, 1710-2700MHz + Gain 3.5-5.5 dBi + Impedance - 50Ohm + Max. Input Power - 100 Watts + Polarisation Vertical Cables + 3 meters LMR240 + 6 meters SPUMA 400 only Series 1 User Guide Page 8 5 RF Exposure Information In the table below, Power and Gain are entered in units of dBm and dBi respectively and conversions to linear forms are used for the calculations. Notes: 1. The manufacturer configures output power so that the maximum power after accounting for manufacturing tolerances, will never exceed the maximum power level measured 2. The output power in the table above is the maximum power per chain among various channels and various modes within the specific band 3. The antenna gain in the table above is the maximum antenna gain among various channels within the specified band Series 1 User Guide Page 9 6 FCC Information Supplier's Declaration of Conformity 47 CFR § 2.1077 Compliance Information FCC ID: 2A7A2-S1 Unique identifier: Series01 Box Responsible party US contact information Cognyte Software LP 35 Pinelawn Road, Suite 204, Melville, NY, 11747 www.cognyte.com FCC Compliance statement subject to Part 15.105 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Series 1 User Guide Page 10