Motive: All-in-One Fleet Management & Driver Safety Platform
Installation Guide for Motive models including: Cable 3002, Cable 3000, Cable 3003, Cable 3002 Vehicle Gateway, Cable 3002, Vehicle Gateway, Gateway
Locate the 9-Pin port. This port is normally located on the driver's side underneath the dash panel and is black or green. For vehicles that require a ...
24 ore fa — A square mount with screws and a threaded mount with a nut. Step 4. Connect and secure the 9-Pin end of the Motive ... successful Bluetooth connection. Please ...
File Info : application/pdf, 8 Pages, 383.34KB
DocumentDocumentCable 3002 Also applicable to Cable 3000 and Cable 3003 Vehicle Gateway installation guide for vehicles with a 9-Pin port Step 1 Step 2 Ensure the vehicle is safe to install the Motive Vehicle Gateway: · The parking brake is engaged. · The engine is o f. · The main power switch (if available) is turned o f. Locate the 9-Pin port. This port is normally located on the driver's side underneath the dash panel and is black or green. 1 3 4 2 5 Step 3 For vehicles that require a Y-cable, one is available upon request. Motive recommends only using one Y-cable per vehicle when necessary. 2 Step 3 (continued) Y-cables come with two unique harness mounts. A square mount with screws and a threaded mount with a nut. Step 4 A tach the 9-Pin Y-cable to the vehicle's 9-Pin port and replace the vehicle's exposed 9-Pin port with the matching end of the 9-Pin Y-cable. Connect and secure the 9-Pin end of the Motive cable to the vehicle's 9-Pin port. 855-434-3564 | support@gomotive.com Step 4 (continued) Use the zip ties provided to secure the cables. A tach the 15-pin connector to the Vehicle Gateway. Secure the 15-pin connector onto the Vehicle Gateway using the thumbscrews. Use the provided alcohol swabs to clean the mounting area. Remove the backing from the adhesive strip on the back of the Vehicle Gateway and a tach it to the mounting area. 00100000 00100000 4 Step 4 (continued) Motive recommends installing the Vehicle Gateway near the windshield, as well as away from any vents, electrical components and at least 12 inches away from any metal components. The Vehicle Gateway may be installed in alternative locations, such as the wheel well, provided it meets the aforementioned requirements. Please ensure all cabling and devices are secured to avoid interfering with safe operation of the vehicle. K 855-434-3564 | support@gomotive.com Step 4 Once plugged in, the indicator lights will flash momentarily before turning solid red. A ter approximately one minute, the le t-side indicator light will turn green indicating a successful GPS connection. Additionally, GPS/GNSS performance may degrade if the vehicle gateway does not have clear line of sight to the sky. 6 Step 5 Once the driver connects to the Vehicle Gateway using the Motive Electronic Logbook App available on iOS and Android, the rightside indicator light will turn green indicating a successful Bluetooth connection. Please refer to the Motive Driver App Guide for more details on the Motive mobile pla form. For any assistance, please contact Motive support at 855434-3564 or email support@gomotive.com. 855-434-3564 | support@gomotive.com Potential Unlocked gomotive.com