Manual-Hub.com - Free English product PDF Documents!
User Manual for aiwa models including: NSX-AJ800 Compact Disc Stereo System, NSX-AJ800, Compact Disc Stereo System, Disc Stereo System, Stereo System
AIWA NSX-AJ800 (01) PDF MANUAL - MANUAL-HUB.COM
File Info : application/pdf, 46 Pages, 11.68MB
DocumentDocumentNSX-AJ800 U NSX-SZ800 LH SERVICE MANUAL COMPACT DISC STEREO SYSTEM BASIC CD MECHANISM : BZG-5 ZD3N1M BASIC TAPE MECHANISM: 2ZM-3MK2 PR4NM/ 6ZM-3 PR4NM SYSTEM CD TAPE CASSEIVER MECHANISM FRONT SATELLITE REMOTE SPEAKER SPEAKER CONTROLLER NSXAJ800 CXNAJ800 6ZM3 PR4NM SXNAJ801 NSXSZ800 CXNSZ800 2ZM3MK2 PR4NM SXWNSZ800 SXS85 RCBAS01 · This Service Manual is the "Revision Publishing" and replace "Simple Manual" NSX-AJ800/SZ800<U,LH>, (S/M Code No. 09-012-443-5T1). · If requiring information about the CD mechanism, see Service Manual of BZG-5 (S/M Code No. 09-00C-353-3N2). S/M Code No. 09-013-443-5R1 REVISIODNATA https://manual-hub.com/ SPECIFICATIONS TUNER FM tuning range: 87.5 MHz to 108 MHz FM usable Sensitivity(IHF): 13.2 dBf FM antenna terminals: 75 ohms (unbalanced) AM tuning range: 530 kHz to 1710 kHz (10 kHz step) 531 kHz to 1602 kHz (9 kHz step) AM usable sensitivity: 350 mV/m AM antenna: Loop antenna AMPLIFIER Main amplifier<U> Power output: Total harmonic distortion: Main amplifier<LH> Power output: Total harmonic distortion: Satellite amplifier<U> Power output: Total harmonic distortion: Satellite amplifier<LH> Power output: Total harmonic distortion: Input: Output: 125 W + 125 W (50 Hz - 20 kHz, THD less than 1%, 6 ohms) 156 W + 156 W (1 kHz, THD less than 10%, 6 ohms) 0.08% (70 W, 1 kHz, 6 ohms, DIN AUDIO) Rated: 120 W + 120 W (6 ohms, T.H.D. 1%, 1kHz) Reference: 150 W + 150 W (6 ohms, T.H.D. 10%, 1kHz) 0.08% (70 W, 1 kHz, 6 ohms, DIN AUDIO) 15 W + 15 W (50 Hz - 20 kHz, THD less than 1%, 8 ohms) 18 W + 18 W (1 kHz, THD less than 10%, 8 ohms) 0.2% (7 W, 1 kHz, 8 ohms, DIN AUDIO) Rated: 16 W + 16 W (8 ohms, T.H.D. 1%, 1kHz) Reference: 20 W + 20 W (8 ohms, T.H.D. 10%, 1kHz) 0.2% (7 W, 1 kHz, 8 ohms, DIN AUDIO) VIDEO/AUX: 700 mV MIC: 1.7 mV (10 kohms)<LH> FRONT SPEAKERS: 6 ohms or more STAELLITE SPEAKERS: 8 ohms or more PHONES: 32 ohms or more CASSETTE DECK<U> Track format: Frequency response: Recording system: Heads: 4 tracks, 2 channels stereo 50 Hz - 15 kHz AC bias DECK 1: playback x 1 DECK 2: recording/playback x 1, erase x 1 CASSETTE DECK<LH> Track format: Frequency response: Recording system: Heads: 4 tracks, 2 channels stereo CrO2 tape: 50 Hz 15000 Hz Normal tape: 50 Hz 15000 Hz AC bias DECK 1: playback x 1 DECK 2: recording/playback x 1, erase x 1 CD PLAYER Laser: D/A converter: Signal-to-noise ratio: Harmonic distortion: Semiconductor laser (l = 780 nm) 1 bit dual 85 dB (1 kHz, 0 dB) 0.05 % (1 kHz, 0 dB) FRONT SPEAKERS SX-NAJ801 ( only for NSX-AJ800) Speaker system: 3 way, bass reflex (magnetic shielded) Speaker units: Impedance: Woofer: 160 mm (63/8 in.) cone Tweeter: 60 mm (23/8 in.) cone Super tweeter: 20 mm (13/16 in.) ceramic 6 ohms Dimensions (W x H x D): 230 x 324 x 224 mm Weight: ( 91/8 x 127/8 x 87/8 in.) 3.8 kg (8 lbs 6 oz) FRONT SPEAKERS SX-WNSZ800 ( only for NSX-SZ800) Speaker system: 3 way, Built-in subwoofer (magnetic shielded type) Speaker units: Subwoofer: 160 mm cone type Full range: 100 mm cone type Super tweeter: 20 mm ceramic type Impedance: 6 ohms Dimensions (W x H x D): 230 x 324 x 257 mm Weight: 4.8 kg SATELLITE SPEAKERS SX-S85 Speaker system: Full range (magnetic shielded type) Speaker units: 80 mm cone type Impedance: 8 ohms Sensitivity: 87 dB/W/m Dimensions (W x H x D): 100 x 325 x 95 mm ( 4 x 127/8 x 33/4 in.)(with pedestal) 100 x 186 x 84 mm Weight: ( 4 x 73/8 x 33/8 in.)(without pedestal) 0.6 kg (1 lbs 5 oz) GENERAL Power requirements: 120 V AC, 60 Hz<U> 120 V/220 - 230 V/240 V AC (Switchable), 50 Hz/60 Hz<LH> Power consumption: 140 W<U>, 180 W<LH> Power consumption in standby mode: With ECO mode on: 0.6 W With ECO mode off: 24 W<U>, 26 W<LH> Dimensions ( W x H x D): 260 x 326 x 345 mm Weight: (101/4 x 127/8 x 135/8 in.) 8.4 kg (18 lbs 8 oz)<U>, 8.9 kg<LH> · Design and specifications are subject to change without notice. · The word "BBE"and the "BBE symbol" are trademarks of BBE Sound, Inc. Under license from BBE Sound,Inc. 2 https://manual-hub.com/ PROTECTION OF EYES FROM LASER BEAM DURING SERVICING This set employs laser. Therefore, be sure to follow carefully the instructions below when servicing. WARNING!! WHEN SERVICING, DO NOT APPROACH THE LASER EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS NECESSARY TO CONFIRM LASER BEAM EMISSION. BE SURE TO OBSERVE FROM A DISTANCE OF MORE THAN 30cm FROM THE SURFACE OF THE OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK. Caution: Invisible laser radiation when open and interlocks defeated avoid exposure to beam. s Advarsel: Usynlig laserståling ved åbning, når sikkerhedsafbrydere er ude af funktion. Undgå udsættelse for stråling. CAUTION Use of controls or adjustments or performance of procedures other than those specified herin may result in hazardous radiation exposure. ATTENTION L'utillisation de commandes, réglages ou procédures autres que ceux spécifiés peut entraîner une dangereuse exposition aux radiations. ADVARSEL Usynlig laserståling ved åbning, når sikkerhedsafbrydereer ude af funktion. Undgå udsættelse for stråling. This Compact Disc player is classified as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT label is located on the rear exterior. VAROITUS! Laiteen Käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saataa altistaa käyt-täjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle. VARNING! Om apparaten används på annat sätt än vad som specificeras i denna bruksanvising, kan användaren utsättas för osynling laserstrålning, som överskrider gränsen för laserklass 1. CLASS 1 KLASSE 1 LUOKAN 1 KLASS 1 LASER PRODUCT LASER PRODUKT LASER LAITE LASER APPARAT Precaution to replace Optical block (KSS-213F) Body or clothes electrostatic potential could ruin laser diode in the optical block. Be sure ground body and workbench, and use care the clothes do not touch the diode. 1) After the connection, remove solder shown in right figure. PICK-UP ASSY PWB 3 https://manual-hub.com/ Solder NOTE ON BEFORE STARTING REPAIR 1. Forced discharge of electrolytic capacitor of power supply block When repair is going to be attempted in the set that uses relay circuit in the power supply block, electric potential is kept charged across the electrolytic capacitors (C101, 102) even though AC power cord is removed. If repair is attempted in this condition, secondary defect can occur. In order to prevent the secondary trouble, perform the following measures before starting repair work. Discharge procedure 1 Remove the AC power cord. 2 Connect a discharging resistor at an end of lead wire that has clips at both ends. Connect the other end of the lead wire to metal chassis. 3 Contact the other end of the discharging resistor to the positive (+) side (+VH) of C101. (For two seconds) 4 Contact the same end of the discharging resistor as step 3 to the negative (-) side (-VH) of C102 in the same way. (For two seconds) 5 Check that voltage across C101 and C102 has decreased to 1 V or less using a multimeter or an oscilloscope. MAIN C.B D101 3 C101 C102 4 2 2 Select a discharging resistor referring to the following table. Charging voltage (V) (C101, 102) Discharging resistor () Rated power (W) 25-48 100 3 49-140 220 5 Parts number 87-A00-247-090 87-A00-232-090 Fig-1 Note: The reference numbers (C101, C102) of the electrolytic capacitors can change depending on the models. Be sure to check the reference numbers of the charging capacitors on schematic diagram before starting the discharging work. 2. Check items before exchanging the MICROCOMPUTER Be sure to check the following items before exchanging the MICROCOMPUTER. Exchange the MICROCOMPUTER after confirming that the MICROCOMPUTER is surely defective. 2-1. Regarding the HOLD terminal of the MICROCOMPUTER When the HOLD terminal (INPUT) of the MICROCOMPUTER is "H", the MICROCOMPUTER is judged to be operating correctly. When this terminal is "L", the main power cannot be turned on. Therefore, be sure to check the terminal voltage of the HOLD terminal before exchange. When the MICROCOMPUTER is not defective, the HOLD terminal can also go "L" when the POWER AMPLIFIER has any abnormalities that triggers the abnormality detection circuit on the MAIN C. B. that sets the HOLD terminal to "L". · Good or no good judgement of the MICROCOMPUTER 1 Turn on the AC main power. 2 Confirm that the main power is turned on and the HOLD terminal of the MICROCOMPUTER keeps the "H" level or not. 3 When the HOLD terminal is "L" level, the abnormality detection circuit is judged to be working correctly and the MICROCOMPUTER is judged to be good. 4 https://manual-hub.com/ In such a case, check also if the POWER AMPLIFIER circuit or power supply circuit has any abnormalities or not. 2-2. Regarding reset There are cases that the machine does not work correctly because the MICROCOMPUTER is not reset even though the AC power cord is re-inserted, or the software reset (pressing the STOP key + POWER key) is performed. When the above described phenomenon occurs, it can lead to wrong judgement as if the MICROCOMPUTER is defective and to exchange the MICROCOMPUTER. In such a case, perform the forced-reset by the following procedure and check good or no good of the MICROCOMPUTER. 1 Remove the AC power cord. MICROCOMPUTER 18 15 FRONT C.B FRONT C.B C113 % VSS C113 MICRO- COMPUTER *VDD Short with tweezers. Fig-2-2 2 Short both ends of the electrolytic capacitor C113 that is connected to VDD of the MICROCOMPUTER with tweezers. 3 Connect the AC power cord again. If the MICROCOMPUTER returns to the normal operation, the MICROCOMPUTER is good. Note: The reference number or MICROCOMPUTER pin number of transistor (Q110) and electrolytic capacitor (C113) can change depending on the models. Be sure to check the reference numbers on schematic diagram before starting the discharging work. 2-3. Confirmation of soldering state of MICROCOMPUTER Check the soldering state of the MICROCOMPUTER in addition to the above described procedures. Be sure to exchange the MICROCOMPUTER after surely confirming that the trouble is not caused by poor soldering but the MICROCOMPUTER itself. 5 https://manual-hub.com/ DISASSEMBLY INSTRUCTIONS 1. How to Remove PANEL, MOVE ASSY Remove the outside ornamental parts, CD mechanism, CABI. FR before starting the following procedure. 1) Remove the FFC (1) and the three screws (2). Then remove HLDR, MECHA ASSY. 2) Remove the eight screws (1) and remove the PWB. FR (2). 3) Remove the three FFC (1), (2), (3). 4) Remove the two screws (1) and remove the HLDR, PANEL 2 (2). Then remove PANEL, MOVE 2 ASSY (3). 5) Remove the screw (1) and the HLDR, PANEL (2). Then remove PANEL, MOVE 1 ASSY (3). 6 https://manual-hub.com/ 2. How to Disassemble PANEL, MOVE 1 ASSY 1) Insert a screwdriver tip into the clearance on top of the PANEL, MOVE 1 ASSY (1) and remove the PANEL, MOVE 1 F (3). 2) Remove the claw (1) and remove the PWB, M-OPE PANEL (2). 3. Note when Re-installing the HLDR, MECHA ASSY Re-installing the HLDR, MECHA ASSY after the PANEL, MOVE is closed. Re-install it in a way that the LEVER SW of the HLDR, MECHA ASSY is located beneath the PANEL, MOVE 1 ASSY. 7 https://manual-hub.com/ ELECTRICAL MAIN PARTS LIST REF. NO. PART NO. IC KANRI NO. DESCRIPTION 87-020-454-010 87-A21-269-010 8B-NF7-631-130 87-A21-831-010 87-A21-911-040 IC,DN6851<U> IC,EW732<LH> C-IC,LC866560W-5V19 IC,SPS-422-1-F1 C-IC,M61515FP 87-A21-419-040 87-A21-893-040 87-A21-023-040 87-A21-401-040 87-A21-695-010 C-IC,NJM14558MD-TE2 C-IC,NJM4558V-TE2 C-IC,BA3835F C-IC,M61503FP IC,LA1845L 87-A21-928-010 IC,LC72131D-N TRANSISTOR 87-A30-494-080 87-026-463-080 87-A30-559-010 87-A30-492-080 87-A30-107-070 87-A30-484-080 87-A30-190-080 87-A30-106-040 87-A30-098-010 87-026-609-080 87-A30-087-080 87-A30-490-080 87-A30-076-080 87-026-610-080 87-A30-074-080 87-A30-162-010 87-A30-582-080 87-A30-495-080 87-A30-091-080 87-A30-090-080 87-A30-063-080 87-A30-256-010 87-A30-255-010 87-A30-075-080 89-327-143-080 87-A30-489-080 87-A30-520-080 87-A30-515-080 87-A30-234-080 TR,2SA1980G TR,2SA933S (0.3W) TR,CSB1370EF TR,2SC5343G C-TR,CMBT5401 C-TR,KRA102S TR,CC5551 C-TR,CMBT5551 TR,FP 1016 TR,KTA1266GR C-FET,2SK2158 C-TR,KRC107S C-TR,2SC3052F TR,KTC3198GR C-TR,RT1P 141C FET,2SK2937 TR,CDA1585BC TR,2SA1981Y FET,2SJ460 FET,2SK2541 C-TR,KRA104S TR,2SD1933 TR,2SB1342 C-TR,2SA1235F C-TR,2SC2714 (0.1W) C-TR,KRA107S TR,2SC5342Y TR,2SA1979O/Y TR,CSC4115BC DIODE 87-A40-393-090 87-A40-839-090 87-A40-781-080 87-A40-764-080 87-A40-553-080 87-A40-270-080 87-A40-269-080 87-A40-291-080 87-A40-488-080 87-A40-748-080 87-A40-747-080 87-A40-749-080 87-A40-768-080 87-A40-802-080 87-A40-739-080 87-A40-128-080 87-017-149-080 DIODE,1N5402GW(F20) DIODE,G5SBA60L-6088 ZENER,UZ36BSA ZENER,UZ10BSC DIODE,1N4003 LES C-DIODE,MC2838 C-DIODE,MC2836 DIODE,1N4148 (CPT) DIODE,1SS244 ZENER,UZ5.6BSA ZENER,UZ5.1BSB ZENER,UZ5.6BSB ZENER,UZ16BSA ZENER,UZ5.1BSC ZENER,UZ2.7BSA C-VARI-CAP,HVU202A ZENER,HZS6A2L MAIN C.B C1 87-A12-383-000 C1 87-016-657-090 CAP,E 3300-65 M 85 IV LELON<U> CAP,E 3300-71<LH> REF. NO. C2 C2 C3 C4 C5 PART NO. KANRI DESCRIPTION NO. 87-A12-383-000 CAP,E 3300-65 M 85 IV LELON<U> 87-016-657-090 CAP,E 3300-71<LH> 87-A12-317-080 C-CAP,U 0.1-50 Z F 87-A12-317-080 C-CAP,U 0.1-50 Z F 87-A12-317-080 C-CAP,U 0.1-50 Z F C6 87-A12-317-080 C-CAP,U 0.1-50 Z F C9 87-010-759-080 C-CAP,U, 0.1-25F C10 87-010-759-080 C-CAP,U, 0.1-25F C11 87-010-759-080 C-CAP,U, 0.1-25F C12 87-010-759-080 C-CAP,U, 0.1-25F C21 87-A12-780-090 CAP,E 4700-35 M 85 SKR C22 87-A12-780-090 CAP,E 4700-35 M 85 SKR C31 87-A12-091-080 CAP,E 10-50 SMG C32 87-012-286-080 CAP, U 0.01-25 C33 87-A12-062-080 CAP,E 100-10 SMG<U> C34 87-A12-072-080 CAP,E 100-25 SMG C35 87-A12-071-080 CAP,E 47-25 SMG C36 87-010-381-080 CAP, ELECT 330-16V C38 87-012-286-080 CAP, U 0.01-25 C60 87-A12-089-080 CAP,E 3.3-50 SMG C61 C83 C97 C101 C102 87-A12-071-080 87-A12-074-080 87-010-831-080 87-012-279-080 87-012-279-080 CAP,E 47-25 SMG CAP,E 470-25 SMG C-CAP,U,0.1-16F C-CAP,U 2700P-50 B C-CAP,U 2700P-50 B C103 C104 C107 C108 C111 87-A12-084-080 87-A12-084-080 87-A12-089-080 87-A12-089-080 87-A12-077-080 CAP,E 0.22-50 SMG CAP,E 0.22-50 SMG CAP,E 3.3-50 SMG CAP,E 3.3-50 SMG CAP,E 33-35 SMG C112 C113 C114 C117 C118 87-A12-077-080 87-A10-596-080 87-A10-596-080 87-A12-317-080 87-A12-317-080 CAP,E 33-35 SMG C-CAP,S 100P-100 J CH C-CAP,S 100P-100 J CH C-CAP,U 0.1-50 Z F C-CAP,U 0.1-50 Z F C119 C120 C123 C124 C133 87-012-286-080 87-012-286-080 87-010-177-080 87-010-177-080 87-012-282-080 CAP, U 0.01-25 CAP, U 0.01-25 C-CAP,S 820P-50 SL C-CAP,S 820P-50 SL CAP, U 4700P-50 C140 C186 C187 C188 C201 87-012-278-080 87-010-759-080 87-A12-180-080 87-A12-180-080 87-010-759-080 C-CAP,U 2200P-50 B C-CAP,U, 0.1-25F CAP,E 10-63 M 105 KME CAP,E 10-63 M 105 KME C-CAP,U, 0.1-25F C202 C203 C204 C220 C225 87-010-759-080 87-010-759-080 87-010-759-080 87-012-274-080 87-A12-317-080 C-CAP,U, 0.1-25F C-CAP,U, 0.1-25F C-CAP,U, 0.1-25F CHIP CAP,U 1000P-50B C-CAP,U 0.1-50 Z F C226 C227 C228 C241 C301 87-A12-317-080 87-A12-317-080 87-A12-317-080 87-010-831-080 87-012-274-080 C-CAP,U 0.1-50 Z F C-CAP,U 0.1-50 Z F C-CAP,U 0.1-50 Z F C-CAP,U,0.1-16F CHIP CAP,U 1000P-50B C302 C303 C304 C307 C308 87-012-274-080 87-012-275-080 87-012-275-080 87-A12-062-080 87-A12-062-080 CHIP CAP,U 1000P-50B C-CAP,U 1200P-50 B C-CAP,U 1200P-50 B CAP,E 100-10 SMG CAP,E 100-10 SMG C309 C310 C313 C314 C315 87-012-188-080 87-012-188-080 87-012-284-080 87-012-284-080 87-A12-062-080 C-CAP,U 47P-50 CH C-CAP,U 47P-50 CH CAP, U 6800P-50 CAP, U 6800P-50 CAP,E 100-10 SMG C317 C318 C326 C327 C360 87-A12-085-080 87-A12-085-080 87-010-787-080 87-010-831-080 87-A12-087-080 CAP,E 0.33-50 SMG CAP,E 0.33-50 SMG CAP, U 0.022-25 C-CAP,U,0.1-16F CAP,E 1-50 SMG 8 https://manual-hub.com/ REF. NO. C399 C401 C402 C403 C404 PART NO. KANRI DESCRIPTION NO. 87-A10-039-080 C-CAP,U 470P-50 J CH 87-A12-083-080 CAP,E 0.1-50 SMG 87-A12-083-080 CAP,E 0.1-50 SMG 87-012-193-080 C-CAP,U 82P-50 CH 87-012-193-080 C-CAP,U 82P-50 CH C405 C405 C406 C406 C407 87-012-283-080 87-012-286-080 87-012-283-080 87-012-286-080 87-012-281-080 C-CAP,U 5600P-50 B<LH> CAP, U 0.01-25<U> C-CAP,U 5600P-50 B<LH> CAP, U 0.01-25<U> C-CAP,U 3900P-50 B<LH> C407 C408 C408 C409 C410 87-012-286-080 87-012-281-080 87-012-286-080 87-012-278-080 87-012-278-080 CAP, U 0.01-25<U> C-CAP,U 3900P-50 B<LH> CAP, U 0.01-25<U> C-CAP,U 2200P-50 B C-CAP,U 2200P-50 B C411 C412 C452 C453 C454 87-A12-091-080 87-A12-091-080 87-A12-069-080 87-012-279-080 87-012-279-080 CAP,E 10-50 SMG CAP,E 10-50 SMG CAP,E 22-25 SMG C-CAP,U 2700P-50 B C-CAP,U 2700P-50 B C455 C456 C457 C458 C459 87-012-279-080 87-012-286-080 87-A12-361-080 87-012-274-080 87-012-271-080 C-CAP,U 2700P-50 B CAP, U 0.01-25 CAP,M 5600P-100 J CP CHIP CAP,U 1000P-50B CAP, U 560P-50 C460 C461 C462 C470 C605 87-010-831-080 87-012-158-080 87-012-158-080 87-018-127-080 87-012-280-080 C-CAP,U,0.1-16F C-CAP,S 390P-50 CH C-CAP,S 390P-50 CH CAP, CER 470P-50V CAP, U 3300P-50 C606 C609 C610 C611 C612 87-012-280-080 87-010-785-080 87-010-785-080 87-A12-084-080 87-A12-084-080 CAP, U 3300P-50 C-CAP,U0.015-25BK C-CAP,U0.015-25BK CAP,E 0.22-50 SMG CAP,E 0.22-50 SMG C613 C614 C615 C616 C617 87-A12-084-080 87-A12-084-080 87-012-172-080 87-016-455-080 87-016-455-080 CAP,E 0.22-50 SMG CAP,E 0.22-50 SMG CAPACITOR CHIP U 10P CH CAP,E 470-6.3 SMG CAP,E 470-6.3 SMG C618 C620 C623 C624 C630 87-A12-091-080 87-A12-062-080 87-A12-084-080 87-A12-084-080 87-A10-260-080 CAP,E 10-50 SMG CAP,E 100-10 SMG CAP,E 0.22-50 SMG CAP,E 0.22-50 SMG C-CAP,U 0.1-16 K B C631 C632 C633 C634 C661 87-012-281-080 87-012-281-080 87-A11-070-080 87-A11-070-080 87-012-336-080 C-CAP,U 3900P-50 B C-CAP,U 3900P-50 B C-CAP,U 0.033-16 K B C-CAP,U 0.033-16 K B CAP, CHIP SS 3300 SL C662 C671 C672 C673 C677 87-012-336-080 87-010-831-080 87-010-831-080 87-012-278-080 87-012-286-080 CAP, CHIP SS 3300 SL C-CAP,U,0.1-16F<LH> C-CAP,U,0.1-16F<LH> C-CAP,U 2200P-50 B<LH> CAP, U 0.01-25 C771 C772 C782 C783 C784 87-A12-062-080 87-012-286-080 87-012-286-080 87-012-286-080 87-012-286-080 CAP,E 100-10 SMG CAP, U 0.01-25 CAP, U 0.01-25 CAP, U 0.01-25 CAP, U 0.01-25 C785 C786 C788 C789 C790 87-012-286-080 87-012-286-080 87-012-167-080 87-A12-052-080 87-A12-052-080 CAP, U 0.01-25 CAP, U 0.01-25 C-CAP,U 5P-50 CH C-CAP,S 0.033-25 J B C-CAP,S 0.033-25 J B C791 C792 C793 C795 C796 87-010-831-080 87-012-286-080 87-A12-090-080 87-012-286-080 87-012-286-080 C-CAP,U,0.1-16F CAP, U 0.01-25 CAP,E 4.7-50 SMG CAP, U 0.01-25 CAP, U 0.01-25 REF. NO. C797 C798 C799 C800 C801 PART NO. KANRI DESCRIPTION NO. 87-A12-091-080 CAP,E 10-50 SMG 87-012-286-080 CAP, U 0.01-25 87-A12-077-080 CAP,E 33-35 SMG 87-010-829-080 CAP, U 0.047-16 87-A12-089-080 CAP,E 3.3-50 SMG C802 C803 C804 C807 C808 87-010-829-080 87-010-787-080 87-A12-062-080 87-A12-086-080 87-A12-087-080 CAP, U 0.047-16 CAP, U 0.022-25 CAP,E 100-10 SMG CAP,E 0.47-50 SMG CAP,E 1-50 SMG C809 C810 C814 C815 C816 87-A12-087-080 87-010-831-080 87-012-286-080 87-A12-086-080 87-A12-086-080 CAP,E 1-50 SMG C-CAP,U,0.1-16F CAP, U 0.01-25 CAP,E 0.47-50 SMG CAP,E 0.47-50 SMG C821 C823 C824 C825 C842 87-A12-091-080 87-010-177-080 87-A12-090-080 87-010-596-080 87-012-286-080 CAP,E 10-50 SMG C-CAP,S 820P-50 SL CAP,E 4.7-50 SMG CAP, S 0.047-16 CAP, U 0.01-25 C844 C850 C851 C852 C853 87-012-286-080 87-A12-071-080 87-012-286-080 87-012-286-080 87-012-286-080 CAP, U 0.01-25 CAP,E 47-25 SMG CAP, U 0.01-25 CAP, U 0.01-25 CAP, U 0.01-25 C858 C901 C904 C905 C907 87-010-831-080 87-018-145-080 87-012-286-080 87-012-286-080 87-012-286-080 C-CAP,U,0.1-16F CAP,TC-U 6.8P-50 CH CAP, U 0.01-25 CAP, U 0.01-25 CAP, U 0.01-25 C908 C909 C910 C911 C912 87-A10-915-080 87-012-286-080 87-012-174-080 87-012-170-080 87-012-195-080 C-CAP,U 1000P-25 J CH CAP, U 0.01-25 CAP CHIP CERA SS 12P CHJ C-CAP,U 8P-50 CH C-CAP,U 100P-50CH C913 C914 C915 C916 C917 87-012-286-080 87-012-166-080 87-012-174-080 87-012-180-080 87-012-186-080 CAP, U 0.01-25 C-CAP,U 4P-50 CH CAP CHIP CERA SS 12P CHJ C-CAP,U 22P-50 CH C-CAP,U 39P-50 CH C918 C921 C922 C959 C960 87-A10-039-080 87-012-195-080 87-012-174-080 87-010-831-080 87-010-831-080 C-CAP,U 470P-50 J CH C-CAP,U 100P-50CH CAP CHIP CERA SS 12P CHJ C-CAP,U,0.1-16F C-CAP,U,0.1-16F C961 C963 C971 C972 C973 87-012-167-080 87-015-785-080 87-A12-067-080 87-A12-090-080 87-012-286-080 C-CAP,U 5P-50 CH CHIP CAPACITOR, 0.1FZ-25Z CAP,E 330-16 SMG CAP,E 4.7-50 SMG CAP, U 0.01-25 C974 C979 C981 C982 C983 87-012-286-080 87-012-195-080 87-A12-071-080 87-010-831-080 87-012-286-080 CAP, U 0.01-25 C-CAP,U 100P-50CH CAP,E 47-25 SMG C-CAP,U,0.1-16F CAP, U 0.01-25 C984 C987 C991 C992 C993 87-012-286-080 87-012-286-080 87-012-176-080 87-012-176-080 87-012-274-080 CAP, U 0.01-25 CAP, U 0.01-25 CAP 15P CAP 15P CHIP CAP,U 1000P-50B C995 C997 C998 C999 CF831 87-012-274-080 87-010-831-080 87-A12-071-080 87-A11-155-080 87-008-261-010 CHIP CAP,U 1000P-50B C-CAP,U,0.1-16F CAP,E 47-25 SMG CAP,TC U 0.01-16 Z F FILTER, SFE10.7MA5-A CF832 CN3 CN101 CN301 CN351 87-008-261-010 8B-NF7-619-010 87-099-197-010 87-A60-620-010 87-A60-625-010 FILTER, SFE10.7MA5-A CONN ASSY,2P V PANO CONN, 9P 6216 V CONN,3P V 2MM JMT CONN,8P V 2MM JMT 9 https://manual-hub.com/ REF. NO. CN501 CN601 CN602 CNA1 CNA2 PART NO. KANRI DESCRIPTION NO. 87-099-564-010 CONN,4P TUC-P4P-B1 87-099-719-010 CONN,30P TYK-B(X) 87-A60-131-010 CONN,6P V FE 8A-NF8-653-010 CONN ASSY,9P TID-A(480)<LH> 8B-NF7-618-010 CONN ASSY,3P V PANO CON351 FC602 FC605 J201 J203 86-ZM3-605-110 88-906-251-110 88-909-101-110 87-A60-929-010 87-A60-238-010 CONN ASSY,8P -RPB<U> FF-CABLE,6P 1.25(RVS-FACE) FF-CABLE, 9P 1.25 100MM JACK,DIA6.3 BLK ST W/S TAI TERMINAL,SP 4P (MSC) J207 J602 J831 JR123 JR124 87-A60-881-010 87-A60-881-010 87-A60-202-010 87-A10-596-080 87-A10-596-080 JACK,PIN 2P MSP 242V05 PBSN JACK,PIN 2P MSP 242V05 PBSN TERMINAL,ANT 4P MSP-154V-02 C-CAP,S 100P-100 J CH C-CAP,S 100P-100 J CH L201 L202 L203 L204 L401 87-A50-610-010 87-A50-610-010 87-A50-610-010 87-A50-610-010 87-A50-625-010 COIL,1UH K(MDEC) COIL,1UH K(MDEC) COIL,1UH K(MDEC) COIL,1UH K(MDEC) COIL,TRAP 85KHZ (SANWA)<LH> L402 L451 L801 L802 L811 87-A50-625-010 87-007-342-010 87-A50-608-010 87-A91-551-010 87-005-847-080 COIL,TRAP 85KHZ (SANWA)<LH> COIL,OSC 85K BIAS COIL,FM DET-N(TOK) FLTR,PCFJZH-450 L(TOK) COIL,2.2UH(CECS) L832 L902 L903 L904 L905 87-005-847-080 88-ZA1-602-110 88-ZA1-601-010 87-005-847-080 88-ZA1-624-010 COIL,2.2UH(CECS) COIL,FM-RF-U2 2G COIL,FM-RF-U1 2G COIL,2.2UH(CECS) COIL,FM IFT 7-6.2 (COILS) L906 L951 R129 R130 R131 88-ZA1-603-010 8A-NF8-667-010 87-A00-262-080 87-A00-262-080 87-A00-262-080 COIL,FM-OSC-U 2G COIL,AM PACK 4(TOK) RES,M/F 0.15-2W J RES,M/F 0.15-2W J RES,M/F 0.15-2W J R132 R243 R244 R245 R246 87-A00-262-080 87-A00-440-050 87-A00-440-050 87-A00-440-050 87-A00-440-050 RES,M/F 0.15-2W J RES,220-1/2W J RP RES,220-1/2W J RP RES,220-1/2W J RP RES,220-1/2W J RP R790 R991 R993 R995 SFR451 87-012-286-080 87-012-195-080 87-012-195-080 87-012-195-080 87-024-435-080 CAP, U 0.01-25 C-CAP,U 100P-50CH C-CAP,U 100P-50CH C-CAP,U 100P-50CH SFR 33K RH 063EC SFR452 TH101 TH102 W99 WH1 87-024-435-080 87-A91-042-080 87-A91-042-080 8B-NFJ-620-010 87-A90-510-010 SFR 33K RH 063EC C-THMS,100K 55001 C-THMS,100K 55001 F-CABLE,9P 2.5 280MM<U> HLDR,WIRE 2.5-9P X992 87-A70-306-010 VIB,XTAL 4.500MHZ CSA-309ST FRONT C.B C39 87-A10-039-080 C40 87-012-195-080 C41 87-012-195-080 C42 87-012-195-080 C43 87-012-195-080 C44 87-012-195-080 C45 87-012-195-080 C46 87-012-195-080 C47 87-012-195-080 C48 87-012-199-080 C49 C50 C141 C142 C153 87-012-267-080 87-012-267-080 87-012-278-080 87-010-785-080 87-A11-058-080 C-CAP,U 470P-50 J CH C-CAP,U 100P-50CH C-CAP,U 100P-50CH C-CAP,U 100P-50CH C-CAP,U 100P-50CH C-CAP,U 100P-50CH C-CAP,U 100P-50CH C-CAP,U 100P-50CH C-CAP,U 100P-50CH C-CAP,U 220P-50 J CH C-CAP,U 270P-50 B C-CAP,U 270P-50 B C-CAP,U 2200P-50 B C-CAP,U0.015-25BK C-CAP,U 0.22-10 K B REF. NO. C154 C155 C156 C158 C161 PART NO. KANRI DESCRIPTION NO. 87-A10-189-040 CAP,E 220-10 87-012-176-080 CAP 15P 87-012-198-080 CAP 180P 87-A10-039-080 C-CAP,U 470P-50 J CH 87-012-274-080 CHIP CAP,U 1000P-50B C162 C165 C166 C171 C172 87-012-274-080 87-012-268-080 87-010-552-040 87-012-369-080 87-010-408-040 CHIP CAP,U 1000P-50B C-CAP,U 330P-50 B CAP,E 22-16 GAS C-CAP,S 0.047-50F CAP,E 47-50 M 11L SME C173 C174 C180 C185 C186 87-010-421-040 87-010-421-040 87-010-759-080 87-010-759-080 87-012-274-080 CAP,E 4.7-50 5L CAP,E 4.7-50 5L C-CAP,U, 0.1-25F C-CAP,U, 0.1-25F CHIP CAP,U 1000P-50B C188 C191 C192 C251 C315 87-012-369-080 87-012-286-080 87-010-759-080 87-010-260-040 87-010-759-080 C-CAP,S 0.047-50F CAP, U 0.01-25 C-CAP,U, 0.1-25F CAP,E 47-25 M 11L SME C-CAP,U, 0.1-25F C391 C392 C451 C452 C453 87-012-274-080 87-012-199-080 87-010-759-080 87-010-759-080 87-010-759-080 CHIP CAP,U 1000P-50B C-CAP,U 220P-50 J CH C-CAP,U, 0.1-25F C-CAP,U, 0.1-25F C-CAP,U, 0.1-25F C454 C455 C502 C503 C505 87-010-759-080 87-010-759-080 87-012-282-080 87-010-112-040 87-010-492-040 C-CAP,U, 0.1-25F C-CAP,U, 0.1-25F CAP, U 4700P-50<LH> CAP,E 100-16 M 11L SME<LH> CAP,E 0.33-50 M 5L SRE<LH> C506 C507 C508 C510 C511 87-012-191-080 87-010-545-040 87-010-544-040 87-012-195-080 87-A12-065-080 CHIP CAP 68 PF<LH> CAP,E 0.22-50 M 11L SME<LH> CAP,E 0.1-50 M 11L SME<LH> C-CAP,U 100P-50CH<LH> CAP,E 33-16 SMG<LH> C512 C514 C515 C517 C518 87-012-274-080 87-010-759-080 87-012-274-080 87-012-274-080 87-010-759-080 CHIP CAP,U 1000P-50B<LH> C-CAP,U, 0.1-25F<LH> CHIP CAP,U 1000P-50B<LH> CHIP CAP,U 1000P-50B<LH> C-CAP,U, 0.1-25F<LH> C520 C531 CN101 CN103 CN201 87-012-273-080 87-010-805-080 87-099-720-010 87-099-196-010 87-099-017-010 C-CAP,U 820P-50 B<LH> CAP, S 1-16<LH> CONN,30P TYK-B(P) CONN,8P 6216 V CONN, 15P 6216 V<LH> CN202 CN301 CN303 CN911 FB501 87-099-013-010 87-099-209-010 87-099-209-010 87-099-212-010 87-A90-896-080 CONN,11P 6216 V<U> CONN,4P 6216H CONN,4P 6216H CONN,5P 6216 V F-BEAD, 035600STY7<LH> FC103 FC201 FC202 FC301 FC303 88-908-301-110 88-915-101-110 88-911-101-110 88-904-091-110 88-904-091-110 FF-CABLE,8P 1.25 FF-CABLE, 15P 1.25 100MM<LH> FF-CABLE,11P 1.25<U> FF-CABLE,4P 1.25 90MM FF-CABLE,4P 1.25 90MM FC911 FL401 J502 L151 LED401 88-905-151-110 8B-NF7-621-010 87-A61-242-010 87-A50-656-010 87-A40-791-040 FF-CABLE, 5P 1.25 150MM FL,BJ815GNK JACK,6.3 BLK MONO W/SW V KM<LH> COIL,CLK 5.76MHZ (TOKO)7KLY LED,LTL-307E RED LED402 S162 S301 S302 S321 87-017-756-040 87-A91-645-010 87-A90-095-080 87-A90-095-080 87-A90-095-080 LED,SLR-342DCT31 ORN SW,RTRY EC12E24304NON-CLICK SW,TACT EVQ11G04M SW,TACT EVQ11G04M SW,TACT EVQ11G04M S322 S323 S324 S326 S327 87-A90-095-080 87-A90-095-080 87-A90-095-080 87-A90-095-080 87-A90-095-080 SW,TACT EVQ11G04M SW,TACT EVQ11G04M SW,TACT EVQ11G04M SW,TACT EVQ11G04M SW,TACT EVQ11G04M 10 https://manual-hub.com/ REF. NO. S328 S335 VR501 PART NO. KANRI DESCRIPTION NO. 87-A90-095-080 SW,TACT EVQ11G04M 87-A90-095-080 SW,TACT EVQ11G04M 87-NB7-602-010 VR,RTRY 10KAX1 1 V<LH> PANORAMA AMP C.B C201 C202 C204 C207 C208 87-A12-088-080 87-A12-088-080 87-016-459-080 87-012-286-080 87-012-286-080 C213 C215 C216 C301 C302 87-012-172-080 87-010-831-080 87-010-831-080 87-012-274-080 87-012-274-080 C303 C304 C309 C310 C311 87-A12-084-080 87-A12-084-080 87-A12-089-080 87-A12-089-080 87-A12-092-080 C312 C315 C316 C317 C318 87-A12-092-080 87-012-199-080 87-012-199-080 87-012-286-080 87-012-286-080 C401 C402 C403 C404 CN101 87-010-831-080 87-010-831-080 87-A12-091-080 87-A12-091-080 87-A60-134-010 CN102 CN104 R333 R334 87-099-043-010 87-049-919-010 87-A00-258-080 87-A00-258-080 CAP,E 2.2-50 SMG CAP,E 2.2-50 SMG CAP,E 470-10 M SMG CAP, U 0.01-25 CAP, U 0.01-25 CAPACITOR CHIP U 10P CH C-CAP,U,0.1-16F C-CAP,U,0.1-16F CHIP CAP,U 1000P-50B CHIP CAP,U 1000P-50B CAP,E 0.22-50 SMG CAP,E 0.22-50 SMG CAP,E 3.3-50 SMG CAP,E 3.3-50 SMG CAP,E 22-50 SMG CAP,E 22-50 SMG CAP 220P CAP 220P CAP, U 0.01-25 CAP, U 0.01-25 C-CAP,U,0.1-16F C-CAP,U,0.1-16F CAP,E 10-50 SMG CAP,E 10-50 SMG CONN,9P V FE CONN 2P EH CONN,3P EH V WHT RES,M/F 0.22-1W J RES,M/F 0.22-1W J PT C.B CN1 ! PT1 ! PT1 ! PT2 ! PT81 ! RY1 ! RY81 ! S1 ! T1 ! T2 ! T81 ! T82 WH81 87-A61-110-010 8B-NF7-612-010 8B-NF7-611-010 8B-MA6-673-010 8B-MA6-671-010 87-A91-339-010 87-A91-418-010 87-A90-165-010 87-A60-317-010 87-A60-317-010 87-A60-317-010 87-A60-317-010 87-A90-510-010 CONN,9P V TID-A<LH> PT,BNF-7LH<LH> PT,BNF-7U<U> PT,SUB BMA H (VRK)<LH> PT,SUB BMA U (VRK)<U> RELAY,AC DC12V G5PA-2<LH> RELAY,AC12V G5PA-1-M<U> SW,SL 1-2-3 SWS2301<LH> TERMINAL, 1P MSC<LH> TERMINAL, 1P MSC<LH> TERMINAL, 1P MSC<U> TERMINAL, 1P MSC<U> HLDR,WIRE 2.5-9P<U> M-0P-PANEL C.B CN304 S341 S342 S343 S344 87-099-209-010 87-A90-095-080 87-A90-095-080 87-A90-095-080 87-A90-095-080 S345 S346 S347 S348 S349 87-A90-095-080 87-A90-095-080 87-A90-095-080 87-A90-095-080 87-A90-095-080 S350 S351 S352 S371 87-A90-095-080 87-A90-095-080 87-A90-095-080 87-A91-991-010 CONN,4P 6216H SW,TACT EVQ11G04M SW,TACT EVQ11G04M SW,TACT EVQ11G04M SW,TACT EVQ11G04M SW,TACT EVQ11G04M SW,TACT EVQ11G04M SW,TACT EVQ11G04M SW,TACT EVQ11G04M SW,TACT EVQ11G04M SW,TACT EVQ11G04M SW,TACT EVQ11G04M SW,TACT EVQ11G04M SW,RTRY REO12303PVB8H S-OP-PANEL C.B REF. NO. CN302 S303 S304 S305 S306 PART NO. KANRI DESCRIPTION NO. 87-A60-083-010 CONN,04P H 9604S-04F 87-A90-095-080 SW,TACT EVQ11G04M 87-A90-095-080 SW,TACT EVQ11G04M 87-A90-095-080 SW,TACT EVQ11G04M<LH> 87-A90-095-080 SW,TACT EVQ11G04M<LH> S307 S308 S329 S330 S332 87-A90-095-080 87-A90-095-080 87-A90-095-080 87-A90-095-080 87-A90-095-080 SW,TACT EVQ11G04M SW,TACT EVQ11G04M SW,TACT EVQ11G04M SW,TACT EVQ11G04M SW,TACT EVQ11G04M S333 87-A90-095-080 SW,TACT EVQ11G04M MOTOR C.B CN912 M900 S911 S912 87-099-210-010 87-045-305-010 87-036-109-010 87-036-109-010 CONN,5P 6216 H MOT,RF-500 TB PUSH SWITCH PUSH SWITCH BOX SW C.B CNA901 8B-NF7-620-010 S901 87-036-252-010 S902 87-036-252-010 CONN ASSY,3P V 120MM SW,PUSH SPPB 51 SW,PUSH SPPB 51 FAN C.B C501 C502 C503 CN502 CN503 87-A12-087-080 87-A12-071-080 87-A12-071-080 87-A60-688-010 87-A60-619-010 CAP,E 1-50 SMG CAP,E 47-25 SMG CAP,E 47-25 SMG CONN,4P H GRY TUC-P04X-C1 CONN,2P V 2MM JMT DECK C.B<U> CON105 SFR1 SOL1 SOL2 SW1 87-099-753-010 87-024-581-010 82-ZM3-628-010 82-ZM3-628-010 87-A90-248-010 CONN,11P H 9604 SFR,3.3K DIA6V K0A SOL ASSY 23 SO SOL ASSY 23 SO SW,MICRO ESE11SH2CXQ SW2 87-A90-248-010 SW,MICRO ESE11SH2CXQ SW3 87-A90-248-010 SW,MICRO ESE11SH2CXQ SW4 87-A90-248-010 SW,MICRO ESE11SH2CXQ SW5 87-A90-248-010 SW,MICRO ESE11SH2CXQ M1 87-045-347-010 MOT,SHU2L 70 DECK C.B<LH> CON1 SFR1 SOL1 SOL2 SW1 87-099-756-010 87-024-581-010 82-ZM3-627-010 82-ZM3-627-010 87-A90-248-010 SW2 87-A90-248-010 SW3 87-A90-248-010 SW4 87-036-110-010 SW5 87-036-110-010 SW6 87-036-110-010 SW8 87-A90-248-010 SW9 87-A90-248-010 M1 87-045-347-010 CONN,15P 9604S F SFR,3.3K DIA6V K0A SOL ASSY 27 SO SOL ASSY 27 SO SW,MICRO ESE11SH2CXQ SW,MICRO ESE11SH2CXQ SW,MICRO ESE11SH2CXQ PUSH SWITCH PUSH SWITCH PUSH SWITCH SW,MICRO ESE11SH2CXQ SW,MICRO ESE11SH2CXQ MOT,SHU2L 70 HEAD-1 C.B 85-ZM3-602-010 CON301 85-MA2-615-010 CON301 87-NF6-615-010 PWB,FLEX A CONN ASSY 3P-PB<U> CONN ASSY,3P PB<LH> HEAD-2 C.B<LH> CON351 11 85-ZM3-602-010 87-NF6-616-010 PWB,FLEX A CONN ASSY,8P-RPB https://manual-hub.com/ CHIP RESISTOR PART CODE Chip Resistor Part Coding 88 A Resistor Code Chip resistor Wattage 1/16W 1/16W 1/10W 1/8W Type 1005 1608 2125 3216 Tolerance 5% 5% 5% 5% Figure Value of resistor Symbol CJ CJ CJ CJ Dimensions (mm) Form LW : A t Resistor Code : A 1.0 0.5 0.35 104 L t 1.6 0.8 0.45 108 W 2 1.25 0.45 118 3.2 1.6 0.55 128 TRANSISTOR ILLUSTRATION E C B 2SA1980G 2SA933S CDA1585BC CSC4115BC KTA1266GR KTC3198GR G D S 2SK2937 D G S 2SK2158 B C E 2SA1979O/Y 2SA1981Y 2SC5342Y 2SC5343G B C E 2SB1342 2SD1933 FP1016 E C B CC5551 S D G 2SJ460 2SK2541 B C E CSB1370EF C B E 2SA1235F 2SC2714O 2SC3052F CMBT5551 CMBT5401 KRA102S KRA104S KRA107S KRC107S RT1P141C 12 https://manual-hub.com/ WIRING 1 (MAIN / FAN) 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 A B C D E F G H I J K L M N O P Q R S T U 13 https://manual-hub.com/ SCHEMATIC DIAGRAM 1 (MAIN 1 / 2) 14 https://manual-hub.com/ SCHEMATIC DIAGRAM 2 (MAIN 2 / 2: TUNER) 15 https://manual-hub.com/ SCHEMATIC DIAGRAM 3 (FAN) 16 https://manual-hub.com/ WIRING 2 (FRONT / MOTOR / BOX SW) 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 A B C D E F G H I J K L M N O P Q R S T U 17 https://manual-hub.com/ WIRING 3 (M OP PANEL) 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 A B C D E F G H I J K L M N O P Q R S T U 18 https://manual-hub.com/ WIRING 4 (S OP PANEL) 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 A B C D E F G H I J K L M N O P Q R S T U 19 https://manual-hub.com/ SCHEMATIC DIAGRAM 4 (FRONT) 20 https://manual-hub.com/ WIRING 5 (PANORAMA AMP) 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 A B C D E F G H I J K L M N O P Q R S T U 21 https://manual-hub.com/ SCHEMATIC DIAGRAM 5 (PANORAMA AMP) 22 https://manual-hub.com/ WIRING 6 (PT : U) 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 A B C D E F G H I J K L M N O P Q R S T U 23 https://manual-hub.com/ SCHEMATIC DIAGRAM 6 (PT: U) 24 https://manual-hub.com/ WIRING 7 (PT : LH) 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 A B C D E F G H I J K L M N O P Q R S T U 25 https://manual-hub.com/ SCHEMATIC DIAGRAM 7 (PT: LH) 26 https://manual-hub.com/ WIRING 8 (DECK: U) 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 A B C D E F G H I J K L M N O P Q R S T U 27 https://manual-hub.com/ WIRING 9 (DECK: LH) 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 A B C D E F G H I J K L M N O P Q R S T U 28 https://manual-hub.com/ IC BLOCK DIAGRAM 29 https://manual-hub.com/ FL (BJ815GNK) GRID ASSIGNMENT AND ANODE CONNECTION GRID ASSIGNMENT 30 https://manual-hub.com/ ANODE CONNECTION 31 https://manual-hub.com/ IC DESCRIPTION IC, LC866560W-5V19 Pin No. Pin Name I/O 1 O-C-SHIFT O 2 O-POWER O 3 O-2PB O 4 O-PANE-LED O 5 O-DATA O 6 O-RMT O 7 O-BIAS O 8 O-MUTE O 9 O-TU-ON/ O-STB-SHIFT-VCD O Description Clock shift output for micro computer when tuner receiving broadcast. Power control ON/OFF output. DECK 2 / DECK 1 play output. Moving PANEL LED ON/OFF output (Not used). Data output. REC MUTE output. Bias ON/OFF output. System MUTE ON/OFF. Tuner power supply ON/OFF output/MICON standby shift VCD output. 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 ~ 41 42 ~ 45 46 47 48 49 50 51 52 ~ 53 54 55 O-PANO-LED HP-MUTE RESET I-DISH I-SUBQ VSS1 CF1 CF2 VDD1 I-HOLD I-KEY1 I-KEY2 I-KEY3 I-PANEL-SW I-JOG I-SPEANA I-CDSW I-WRQ I-TM-BASE I-RMC G12 ~ G1 P35 ~ P32 VDD3 P31 SPEANA-A/P30 SPEANA-B/P29 SPEANA-C/P28 VP P27 ~ P26 ECO-OFF/P25 LW/P24 O Panorama LED ON/OFF output. I Head phone jack detection. "L" : MUTE I Reset input for MICON. I CD turnable photo sensor input. I SUB-Q data input. - Connected to ground. I Oscillator circuit input (5.76 MHz). O Oscillator circuit output (5.76 MHz). - Digital power supply pin. I Power failure detected input. I Key A/D input 1. I Key A/D input 2. I Key A/D input 3. I Panel OPEN/CLOSE detect switch AD input. I Dial jog rotary encoder input. I Spectrum analyser level detection. I CD mehca switch input. I CD WRQ input. I Reference clock input for timer switch. I System remote control signal input. "L" : ACTIVE O FL grid G12 ~ G1 output. O FL segment P35 ~ P32 output. - Digital power supply pin. O FL segment P31 output. O Spectrum analyser BPF switching control A output/FL segment P30 output. O Spectrum analyser BPF switching control B output/FL segment P29 output. O Spectrum analyser BPF switching control C output/FL segment P28 output. - Power supply for FL. O FL segment P27 ~ P26 output. I/O ECO-OFF data input<LH only>/FL segment P25 output. I/O LW diode input (Not used)/FL segment P24 output. 32 https://manual-hub.com/ Pin No. 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 Pin Name KARAOKE/P23 DEMO/P22 DOLBY/P21 AM-ST/P20 SOFT/P19 SW/P18 FM1/P17 PANO/P16 AM-9K/10K/P15 CASINO/P14 REA/P13 CST1/P12 CAM1/P11 AUTO2/P10 AUTO1/P9 CAM2/P8 VDD4 REB/P7 CST2/P6 M-GEQ/P5 R+1/P4 1+1/P3 P-CL/P2 P-OP/P1 BOX1 BOX2 I-VOL2 I-VOL1 I-IFC O-MP-CL O-MP-OP O-PLL CE O-KSCAN VSS2 VDD2 STBY-LED O-MOTOR O-SOL1 O-SOL2 O-CD-DATA O-CD-CLK I/O Description I/O Karaoke input to diode<LH only>/FL segment P23 output. I/O Demo (on the stop) diode input (Not used)/FL segment P22 output. I/O DECK DOLBYdiode input (Not used)/FL segment P21 output. I/O AM-ST select diode (Not used)/FL segment P20 output. I/O DECK SOFT diode input (Not used)/FL segment P19 output. I/O SW diode input (Not used)/FL segment P18 output. I/O FM1 diode input (Not used)/FL segment P17 output. I/O Panorama diode input/FL segment P16 output. I/O AM-9K/10Kselect diode input/FL segment P15 output. I/O Initial casino diode input<LH only>/FL segment P14 output. I/O DECK2 side A recordable switch. "L" : REC<LH only>/FL segment P13 output. I/O DECK1 cassette detection switch data input. "L" : ON/FL segment P12 output. I/O DECK1 CAM STOP switch data input. "L" : ON/FL segment P11 output. I/O DECK2 AUTO STOP switch data input/FL segment P10 output. I/O DECK1 AUTO STOP switch data input/FL segment P9 output. I/O DECK2 CAM switch data input. "L" : ON/FL segment P8 output. - Digital power supply pin. I/O DECK2 side B recordable switch. "L" : REC<LH only>/FL segment P7 output. I/O DECK2 cassette detection switch data input. "L" : ON/FL segment P6 output. I/O Manual GEQ diode input<LH only>/FL segment P5 output. I/O DECK R+1 diode input<U only>/FL segment P4 output. I/O DECK 1+1 diode input (Not used)/FL segment P3 output. I/O (Not used)/FL segment P2 output. I/O (Not used)/FL segment P1 output. I Cassette BOX1 open/close detect input. I Cassette BOX1 open/close detect input. I Volume rotary encoder input 2. I Volume rotary encoder input 1. I Tuner IF count input. O Moving panel close output. O Moving panel open output. O Tuner PLL IC chip enable output. O Initial scan output. - Connected to ground. - Digital power supply pin. O Standby LED ON/OFF output. "L" : ON O Cassette deck motor control output. O DECK1 solenoid output. O DECK2 solenoid output. O CD IC control data output. O CD IC control clock output. 33 https://manual-hub.com/ Pin No. 97 98 99 100 Pin Name I/O Description O-CD-CE O CD data chip enable output. I-STEREO/I-DRF I Tuner stereo detect input/RF (radio frequency) detect. O-P-DATA O Panorama IC data output. O-CLK O PLL IC clock output. 34 https://manual-hub.com/ ADJUSTMENT 1 <TUNER / FRONT> < TUNER SECTION > 1. Clock Frequency Check Settings : · Test point : TP2 (CLK) Method : Set to AM 1710 kHz and check that the test point is 2160 kHz ± 45 Hz. 2. AM VT Check Settings : · Test point : TP1 (VT) Method : Set to AM 1710 kHz and check that the test point is less than 8.5 V. Then set to AM 530 kHz and check that the test point is more than 0.6 V. 3. AM Tracking Adjustment Settings : · Test point : TP8 (Lch), TP9 (Rch) · Adjustment location : L951(1/3) Method : Set to AM 1000 kHz and adjust L951(1/3) so that the test point becomes maximum. 4. AM IF Adjustment Settings : · Test point : TP8 (Lch), TP9 (Rch) · Adjustment location : L802 ................................................... 450 kHz 5. FM VT Adjustment Settings : · Test point : TP1 (VT) · Adjustment location: L906 Method : Set to FM 87.5 MHz check that the test point is more than 0.4 V. Then set to FM 108.0 MHz and adjust L906 so that the test point becomes 7.0 V ± 0.1 V. 6. FM Tracking Adjustment Settings : · Test point : TP8 (Lch), TP9 (Rch) · Adjustment location: L903 Method : Set to FM 87.5 MHz and adjust L903 so that the test point is less than 9 dBµV. 7. DC Balance / Mono Distortion Adjustment Settings : · Test point : TP3, TP4 (DC Balance) TP8 (LCH), TP9 (RCH) (Mono Distortion) · Adjustment location : L801 · Input level : 60 dBµV Method : Set to FM 98.0 MHz and adjust L801 so that the voltage between TP3 and TP4 becomes 0 V ± 500 mV with minimum distortion. 8. Output Level Check <AM> Settings : · Test point : TP8 (Lch), TP9 (Rch) · Input level : 74 dBµV Method : Set to AM 1000 kHz and check that the test point is 40 mV ± 3 dB. <FM> Settings : · Test point : TP8 (Lch), TP9 (Rch) · Input level : 60 dBµV Method : Set to FM 98.0 MHz and check that the test point is 150 mV ± 3 dB. 9. FM Separation Check Settings : · Test point : TP8 (Lch), TP9 (Rch) · Input level : 60 dBµV Method : Set to FM 98.0 MHz and check that the test point is more than 25 dB. < FRONT SECTION > 10. µ-CON OSC Adjustment Settings : · Test point : TP5 (KEY-SCAN) TP6 (GND) · Adjustment location : L151 Method : Insert AC plug while pressing of "POWER" key and "TUNER" function key. Connect a frequency counter across TP5 and TP6. Then adjust L501 so that the test point becomes 141.67 Hz ± 0.14 Hz. [ Manual Reset ] Make up for RESET after adjustment. * Reset is to press "POWER" key while pressing of "CLEAR (STOP)" key. 35 https://manual-hub.com/ ADJUSTMENT 2 <DECK> < DECK SECTION > 1. Tape Speed Adjustment (DECK 2) Settings : · Test tape : TTA100 · Test point : TP8 (Lch), TP9 (Rch) · Adjustment location : SFR1 Method : Play back the test tape and adjust SFR1 so that the test point becomes 3000 Hz ± 5 Hz (FWD) and FWD SPEED ± 45Hz (REV) with respect to forward speed. 2. Head Azimuth Adjustment (DECK 1, DECK 2) Settings : · Test tape : TTA330 · Test point : TP8 (Lch), TP9 (Rch) · Adjustment location : Head azimuth adjustment screw Method : Play back (FWD) the 8 kHz signal of the test tape and adjust screw so that the output becomes maximum. Next, perform on REV PLAY mode. 3. PB Frequency Response Check (DECK 1, DECK 2) Settings : · Test tape : TTA330 · Test point : TP8 (Lch), TP9 (Rch) Method : Play back the 315 Hz and 10 kHz signals of the test tape and check that the output ratio of the 10 kHz signal with respect to that of the 315 Hz signal is 0 dB ± 5 dB. 4. PB Sensitivity Check (DECK 1, DECK 2) Settings : · Test tape : TTA200 · Test point : TP8 (Lch), TP9 (Rch) Method : Play back the test tape and check that the output level of the test point is 110 mV ± 3 dB. 5. REC/PB Frequency Response Check (DECK 2) Settings : · Test tape : TTA602 · Test point : TP8 (Lch), TP9 (Rch) · Input signal : 8 kHz/1 kHz (-26 dB) · Adjustment location: SFR451 (Lch) SFR452 (Rch) Method : Apply a 1 kHz signal and REC mode. Then adjust OSC attenuator so that the output level at TP8, TP9 becomes 10 mV. Record and play back the 1 kHz and 8 kHz signals and adjust SFRs so that the output of 8 kHz signals becomes 0 dB ± 1 dB with respect to that of the 1 kHz signal. 6. REC/PB Frequency Response Check (DECK 2) Settings : · Test tape : TTA602 · Test point : TP8 (Lch), TP9 (Rch) · Input signal : 8 kHz/1 kHz (-26 dB) Method : Apply a 1 kHz signal and REC mode. Then adjust OSC attenuator so that the output level at TP8, TP9 becomes 10 mV. Record and play back the 1 kHz signals and check that the output is 0 dB ± 2.5 dB. 7. REC/PB Sensitivity Check (DECK 2) Settings : · Test tape : TTA602 · Test point : TP8 (Lch), TP9 (Rch) · Input signal : 1 kHz (0VU / -8.0 dB) Method : Apply a 1 kHz signal and REC mode. Then adjust OSC attenuator so that the output level at TP8, TP9 becomes 80 mV. Record and play back the 1 kHz signals and check that the output is 1 dB ± 3.5 dB. 36 https://manual-hub.com/ CD TEST MODE 1. How to Start the CD Test Mode While pressing the FUNCTION button, insert the AC plug to the power outlet. When the test mode is started, the message [CD TEST] is displayed. 2. How to Exit the CD Test Mode Press the POWER button or disconnect the AC plug. * When any key other than PLAY is pressed during play mode, the machine exits the test mode. 3. Function Descriptions and Application of the CD Test Mode No Mode Operation Display Function Checking item 1 Start mode All indicators light · All FL indicators light · FL check · Microprocessor check 2 Search STOP button READING · LD illuminates all the time · APC circuit check mode · Focus search continuous · Laser current measurement operations *1 · Focus search waveform check · Spindle motor continuous kick · Focus error waveform check (DRF in the search mode is ignored) 3 Play mode Play button Normal · Normal playback · Each servo circuit is checked · If TOC cannot be read, focus · DRF check search is continued 4 Traverse PAUSE Normal · Tracking servo OFF/ON · Tracking balance check mode button · Each time PAUSE button is pressed, the tracking servo repeats turning OFF/ON 5 Sled mode FF button CD TEST · Pickup moves to the inner · Sled circuit check circumference *2 · Tracking circuit check At the same time, lens kicks to · Mechanism operation check the inner circumference · Pickup check RWD button CD TEST · Pickup moves to the outer circumference *2 At the same time, lens kicks to the outer circumference 6 Spindle REC/REC All indicators light · The spindle motor rotates · Spindle circuit mode MUTE button forward (rough speed) by · Spindle motor pressing the button and rotates backward by pressing one more time and stops by pressing again *1: The driver IC heats up and the protection circuit starts working when the focus search is continued for 10 minutes or longer. There can be a case that operations cannot be performed correctly. In such a case, turn off the main power. After cooling down the machine, restart the machine. *2: Be careful not to damage the gear because the sled motor rotates while the FF or RWD button is being pressed even if the pick-up is located in the innermost track or the outermost track. 37 https://manual-hub.com/ MECHANICAL EXPLODED VIEW 1 / 1 A 43 U G 42 56 11 8 43 a 16 12 55 9 10 15 I A PWB 7 FC303 C 13 14 5 3 a 1 2 6 17 LH 4 BZG-5 A A 46 45 PWB FC602 57 WIRE,BINDER A 54 CON301 44 47 E A FL401 27 CON351 A E 58 A PWB F A 59 HT-SINK, ASSY LH FC605 48 A 60 19 23 PWB 21 A b 24 18 I 41 A FC103 A A FC911 PWB FC301 FC201<LH> 26 28 FC202<U> 25 A 29 b B 33 30 20 21 31 32 34 35 PWB B 14 22 D A 36 40 37 38 49 A A A 50 G A 61 J J A H H F 62 CF c PLATE,PT 85 C 52 51 c C A PWB 38 37 2ZM-3MK2<LH> 6ZM-3<U> CHAS,MAIN 39 G PLATE,EARTH MIC PLATE,EARTH MECH 38 A U 50 G A H H A PLATE,PT 85 U A 53 https://manual-hub.com/ MECHANICAL PARTS LIST 1 / 1 REF. NO. 1 2 3 4 4 PART NO. KANRI DESCRIPTION NO. 8B-NF7-007-010 WINDOW,CASS 1 8B-NF7-008-010 WINDOW,CASS 2 8B-NF7-003-010 BOX,CASS 1 REV 8B-NF7-042-010 BOX,CASS 2 1WAY<U> 8B-NF7-004-010 BOX,CASS 2 REV<LH> 5 8A-NF8-281-010 6 8A-NF8-282-010 7 8B-NF7-083-010 7 8B-NF7-009-010 8 8B-NF7-030-010 SPR-T,EJECT 1 SPR-T,EJECT 2 PANEL,MOVE 1F LH<LH> PANEL,MOVE 1F U<U> KEY,CD 9 8B-NF7-022-010 10 8B-NF7-031-010 11 8B-NF7-045-010 11 8B-NF7-010-010 12 8B-NF7-013-010 KEY,ASSY OPE REV KEY,ENTER PANEL,MOVE 1R H<LH> PANEL,MOVE 1R U<U> KNOB,RTRY JOG 13 8B-NF7-068-010 13 8B-NF7-006-010 14 8Z-NF6-210-010 15 8B-NF7-221-010 16 8B-NF7-015-010 WINDOW,DISP LH<LH> WINDOW,DISP U<U> DMPR,150 N HLDR,PANEL KEY,ASSY POWER 17 8B-NF7-014-010 18 8B-NF7-052-010 19 8B-NF7-048-010 20 8B-NF7-037-010 21 8B-NF7-223-010 KNOB,RTRY MIC<LH> RING,FUN 4 KEY,ASSY FUN 4 KEY,PANEL HLDR,PANEL 2 22 8B-NF7-061-010 22 8B-NF7-001-010 23 8B-NF7-029-010 24 8B-NF7-055-010 24 8B-NF7-032-010 CABI,FR H<LH> CABI,FR U<U> KEY,BBE KEY,TIMER H<LH> KEY,TIMER U<U> 25 8B-NF7-086-010 25 8B-NF7-011-010 26 8B-NF7-220-010 27 8A-NF6-201-010 28 8B-NF7-214-010 PANEL,MOVE 2 LH<LH> PANEL,MOVE 2U<U> SPR-T,OPEN GUIDE,FL BELT,SQ 1.8-113.5 29 8B-NF7-213-010 30 8B-NF7-212-010 31 8B-NF7-211-010 32 8B-NF7-217-010 33 8B-NF7-210-010 PULLEY,RELAY GEAR,RELAY GEAR,PANEL LEVER,SW HLDR,MECHA 34 84-ZG1-267-010 35 87-045-305-010 36 87-NF4-216-010 37 86-NF9-224-010 38 82-NF5-229-010 PULLEY,LOAD MO 8 MOTOR, RF-500TB DC-5V (2MA) HLDR,LOCK 1 SPR-C,LOCK PLATE,LOCK REF. NO. 39 40 41 42 43 PART NO. KANRI DESCRIPTION NO. 87-NF4-217-110 HLDR,LOCK 2 8B-NF7-012-010 KNOB,RTRY VOL 8B-NF7-222-010 HLDR,STOP 8A-NF8-007-010 PANEL,LEFT V-2 8B-NF7-040-010 PANEL,TOP V-2 ANF8<LH> 43 8B-NF7-039-010 44 87-CE3-023-010 45 8B-NF7-035-010 46 8B-NF7-005-010 47 8A-NF8-206-010 PANEL,TOP V-2 BNFK<U> BADGE,AIWA 30N SILV WINDOW,TRAY PANEL,TRAY HLDR,PWB M 48 8B-NF7-239-010 49 87-064-185-010 50 8B-NF7-209-010 50 8A-NF7-225-010 51 87-085-185-010 HLDR,TR U HLDR,WIRE HLDR,PT(85-58)<U> HLDR,PWB PT 85S<LH> BUSHING, AC CORD (E)<LH> 51 87-A91-422-010 ! 52 87-A80-157-010 ! 52 87-A80-149-010 53 8A-NF8-008-010 54 8B-NF7-071-010 BUSHING,AC CORD(U)<U> AC CORD ASSY,E BLK CC<LH> AC CORD ASSY,U BLK<U> PANEL,RIGHT V-2 CABI,REAR LHSM<LH> 54 8B-NF7-002-010 55 8B-NF7-026-010 56 8A-NF8-006-010 57 8B-NF7-225-010 58 8B-NF7-237-010 CABI,REAR USM<U> KEY,ASSY PANORAMA WINDOW,TOP<LH> HLDR,TR PNRM ST HLDR,TR PNRM 59 8B-NF7-236-010 60 8B-NF7-235-010 61 8B-NF7-238-010 62 87-A91-751-010 A 87-067-703-010 HLDR,PWB PNRM R HLDR,PWB PNRM F HLDR,FAN LOW FAN,DSB0812M-S382 -400MM TAPPING SCREW, BVT2+3-10 B 87-067-758-010 C 87-721-096-410 D 87-067-688-010 E 87-NF4-224-010 F 87-067-579-010 BVT2+3-12 W/O SLOT QT2+3-10 GLD BVTT+3-6 S-SCREW,IT3B+3-8 CU TAPPING SCREW, BVT2+3-8 G 87-067-641-010 H 87-078-199-010 I 87-721-097-410 J 87-B10-315-010 UTT2+3-8(W/O SLOT)BL S-SCREW,ITC+4-10 R QT2+3-12 GLD BVIT3B+3-8 R W/O COLOR NAME TABLE Basic color symbol Color Basic color symbol Color Basic color symbol Color B Black C Cream D Orange G Green H Gray L Blue LT Transparent Blue N Gold P Pink R Red S Silver ST Titan Silver T Brown V Violet W White WT Transparent White Y Yellow YT Transparent Yellow LM Metallic Blue LL Light Blue GT Transparent Green LD Dark Blue DT Transparent Orange GM Metallic Green YM Metallic Yellow DM Metallic Orange PT Transparent Pink LA Aqua Blue GL Light Green HT Transparent Gray 39 https://manual-hub.com/ TAPE MECHANISM EXPLODED VIEW 1 / 1 <U> 26 25 31 PWB 38 24 23 22 56 e PLATE, SHLD M3 29 LVR EJECT L 27 SH, 1.63-3.2 -0.5 SLT e 30 28 J 45 46 F 40 G 44 H 32 35 36 43 32 47 37 42 34 41 33 58 M L 30 34 33 J 36 48 55 b 35 31 41 B A 51 A 52 14 53 47 21 N K 58 a 27 b 57 GEAR 9 PLAY dc 4 3 38 a LVR EJECT R 7 4 10 11 12 8 13 2 7 4 15 49 54 9 39 10 2 1 6 3 5 60 I 16 17 c d E 18 11 GEAR PLAY 13 6 12 4 54 PWB 19 MOTOR 8 50 20 I 40 https://manual-hub.com/ TAPE MECHANISM PARTS LIST 1 / 1 <U> REF. NO. 1 2 3 4 5 PART NO. KANRI DESCRIPTION NO. 82-ZM1-234-310 FLY-WHL,L ASSY 82-ZM3-305-310 GEAR,CAM M2(*) 82-ZM1-226-010 GEAR,REW 82-ZM1-216-510 GEAR,REEL 09-001-420-010 FLY-WHL,R ASSY 6 82-ZM1-225-210 7 82-ZM3-306-110 8 82-ZM3-333-310 9 82-ZM1-322-010 10 82-ZM1-220-210 GEAR,FR LVR,FR M2 SLIP DISK ASSY 2 SPR-T,FR 60 GEAR,IDLER 11 82-ZM3-616-010 12 82-ZM1-227-310 13 82-ZM1-265-310 14 86-ZM3-219-010 15 82-ZM1-237-610 RING MAGNET 4 LVR,TRIG SPR-E,TRIG PLATE,SPACER 0.1 FLY-WHL ASSY,RW 16 86-ZM3-210-010 17 82-ZM3-221-210 18 86-ZM3-203-010 19 86-ZM1-206-010 20 82-ZM3-628-010 BELT,PS PULLEY,MOT 2M 3 HLDR,MOT S BELT,MAIN L SOL ASSY,23 SO 21 82-ZM3-335-310 22 86-ZM3-215-110 23 82-ZM1-258-210 24 82-ZM1-341-210 25 82-ZM1-266-310 PULLEY,COUPLER M3 CHAS ASSY,RS SPR-T,PINCH L LVR ASSY,PINCH L2 LVR,DIR 26 82-ZM1-214-010 27 82-ZM1-333-210 28 82-ZM3-339-110 29 82-ZM1-255-310 30 82-ZM1-285-410 SPR-T,DIR PLATE,LINK2 SHAFT,COUPLER N3 SPR-E,LVR DIR SPR-C,BT L 31 82-ZM1-222-310 32 82-ZM1-217-410 33 82-ZM1-244-510 34 82-ZM1-257-010 35 82-ZM1-242-010 LVR,PLAY REEL TABLE SPR-C,BT SPR-T,CAS LVR,CAS 36 82-ZM1-243-010 37 82-ZM1-240-110 38 82-ZM1-344-110 39 86-ZM3-204-010 40 82-ZM1-208-310 LVR,STOP LVR,REC(*) LVR ASSY,PINCH R2 SPR-T,PINCH S HLDR,HEAD REF. NO. 41 42 43 44 45 PART NO. KANRI DESCRIPTION NO. 82-ZM1-219-110 SPR-T,LINK 82-ZM1-210-110 GEAR,H T 82-ZM3-353-010 SPR-T,HEAD 82-ZM1-207-910 GUIDE,TAPE 82-ZM1-314-110 PLATE,HEAD 46 87-A92-196-010 47 82-ZM1-218-010 48 82-ZM1-206-910 49 86-ZM3-214-110 50 82-ZM1-338-110 HEAD,PH HADKH2604A FPC SPR-E,HB CHAS,HEAD BELT,SBU RR BELT,FR 4 51 87-A92-195-010 52 86-ZM3-205-110 53 86-ZM3-202-210 54 82-ZM1-245-210 55 86-ZM3-605-110 HEAD,RPH HASVH5507A SPR-C,RPH S BASE,HEAD S HLDR,IC CONN ASSY,8P -RPB 56 82-ZM1-259-210 57 86-ZM3-201-010 58 82-ZM1-269-210 A 86-ZM3-207-010 B 86-ZM3-209-010 SPR-T,PINCH R CHAS,HEAD S SPR-T,BRG S-SCREW,RPH S-SCREW,AZIMUTH S C 86-ZM3-218-110 D 86-ZM3-208-110 E 87-251-071-410 F 80-ZM6-207-010 G 86-ZM4-206-010 S-SCREW,EH 2 S-SCREW,EH U+2.6-4 V+1.6-7 S-SCREW,AZIMUTH L H 85-ZM3-202-010 I 82-ZM3-334-010 J 80-ZM6-243-010 K 87-B10-043-010 L 86-ZM3-213-010 S-SCREW,TG PW 2.16-6-0.4 SH 1.75-3.6-0.5 SLT W-P,0.99-4-0.25 SLT S-SCREW,HLDR MOT S M 87-761-073-410 VFT2+2.6-8 W/O SLOT N 82-ZM3-222-010 S-SCREW,SHILD PLATE 41 https://manual-hub.com/ TAPE MECHANISM EXPLODED VIEW 1 / 1 <LH> 7 8 1 2 4 3 5 6 60 PLATE SHLD,M3 29 PWB 38 27 31 B 44 A C 47 45 48 46 49 52 50 53 29 32 35 37 51 39 43 47 48 49 b 30 58 29 60 b 38 E 32 29 58 31 30 40 43 37 35 54 50 39 55 51 40 a 36 25 12 15 13 14 16 11 59 10 56 33 D 23 24 19 PWB 18 20 17 7 GEAR 8 28 PLAY 21 19 42 25 33 15 18 11 13 D 14 26 16 17 20 4 GEAR PLAY 5 6 PLATE SHLD,M3 21 57 23 41 24 19 28 42 22 PWB 34 42 44 B A C 9 46 52 53 a 54 55 https://manual-hub.com/ TAPE MECHANISM PARTS LIST 1 / 1 <LH> REF. NO. 1 2 3 4 5 PART NO. KANRI DESCRIPTION NO. 82-ZM3-335-310 PULLEY,COUPLER M3 87-B10-043-010 W-P,0.99-4-0.25 SLT 86-ZM1-206-010 BELT,MAIN L 82-ZM1-322-010 SPR-T,FR 60 82-ZM1-220-210 GEAR,IDLER 6 82-ZM3-616-010 7 82-ZM1-341-210 8 82-ZM1-258-210 9 87-A90-821-110 10 82-ZM3-342-010 RING MAGNET 4 LVR ASSY,PINCH L2 SPR-T,PINCH L HEAD,RPH HADKH56 FPC BELT,SBU MOT 3 11 82-ZM1-338-110 12 09-001-420-010 13 82-ZM3-333-310 14 82-ZM3-334-010 15 82-ZM3-306-110 BELT,FR 4 FLY-WHL,R ASSY SLIP DISK ASSY 2 PW 2.16-6-0.4 LVR,FR M2 16 82-ZM1-225-210 17 82-ZM3-305-310 18 82-ZM1-226-010 19 82-ZM1-216-510 20 82-ZM1-227-310 GEAR,FR GEAR,CAM M2(*) GEAR,REW GEAR,REEL LVR,TRIG 21 82-ZM1-265-310 22 82-ZM3-351-010 23 82-ZM1-344-210 24 82-ZM1-259-210 25 82-ZM1-234-310 SPR-E,TRIG HLDR,IC 2 LVR ASSY,PINCH R2 SPR-T,PINCH R FLY-WHL,L ASSY 26 82-ZM1-237-610 27 82-ZM3-339-110 28 82-ZM1-255-310 29 82-ZM1-217-410 30 82-ZM1-285-410 FLY-WHL,R ASSY SHAFT,COUPLER N3 SPR-E,LVR DIR REEL TABLE SPR-C,BT L 31 82-ZM1-333-210 32 82-ZM1-222-310 33 82-ZM3-307-010 34 87-045-347-010 35 82-ZM1-257-010 PLATE,LINK2 LVR,PLAY(*) CUSH-G,DIA3.7-8-3.2 MOT,SHU2L 70 SPR-T,CAS REF. NO. 36 37 38 39 40 PART NO. KANRI DESCRIPTION NO. 82-ZM3-340-010 SH,BELT D2 82-ZM1-242-010 LVR,CAS 82-ZM1-244-510 SPR-C,BT 82-ZM1-243-010 LVR,STOP 82-ZM1-240-110 LVR,REC(*) 41 82-ZM1-264-010 42 82-ZM3-627-010 43 82-ZM1-241-310 44 82-ZM1-208-310 45 87-A90-820-110 LVR,EJECT R SOL ASSY 27 SO LVR,MC HLDR,HEAD HEAD,PH HADKH25 FPC 46 82-ZM1-314-110 47 82-ZM1-207-910 48 82-ZM3-353-010 49 82-ZM1-210-110 50 82-ZM1-219-110 PLATE,HEAD GUIDE,TAPE SPR-T,HEAD 2 GEAR,H T SPR-T,LINK 51 82-ZM1-269-210 52 82-ZM1-218-010 53 82-ZM1-206-910 54 82-ZM1-266-310 55 82-ZM1-214-010 SPR-T,BRG SPR-E,HB CHAS,HEAD LVR,DIR SPR-T,DIR 56 82-ZM3-221-210 57 82-ZM3-301-610 58 80-ZM6-243-010 59 82-ZM3-329-410 60 82-ZM1-288-010 PULLEY,MOT 2M CHAS ASSY,M2 SH 1.75-3.6-0.5 SLT BELT,SBU R2 SH,1.63-3.2-0.5 SLT A 80-ZM6-207-010 B 86-ZM4-206-110 C 85-ZM3-202-010 D 82-ZM3-222-010 E 82-ZM3-318-110 V+1.6-7 S-SCREW,AZIMUTH L S-SCREW,TG S-SCREW,SHILD PLATE S-SCREW W,MOTOR M2 43 https://manual-hub.com/ GENERAL SPEAKER DISASSEMBLY INSTRUCTIONS (FOR REFERENCE) Type.1 Insert a flat-bladed screwdriver into the position indicated by the arrows and remove the panel. Remove the screws of each speaker unit and then remove the speaker units. Type.4 TOOLS 1 Plastic head hammer 2 (() flat head screwdriver 3 Cut chisel Type.2 Remove the grill frame and four pieces of rubber caps by pulling out with a flat-bladed screwdriver. Remove the screws from hole where installed rubber caps. Insert a flat-bladed screwdriver into the position indicated by the arrows and remove the panel. Remove the screws of each speaker unit and then remove the speaker units. 12 3 How to Remove the PANEL, FR 1. Insert the (() flat head screwdriver tip into the gap between the PANEL, FR and the PANEL, SPKR. Tap the head of the (() flat head screwdriver with the plastic hammer head, and create the clearance as shown in Fig-1. 2. Insert the cut chisel in the clearance, and tap the head of the cut chisel with plastic hammer as shown in Fig-2, to remove the PANEL, FR. 3. Place the speaker horizontally. Tap head of the cut chisel with plastic hammer as shown in Fig-3, and remove the PANEL, FR completely. Type.3 Insert a flat-bladed screwdriver into the position indicated by the arrows and remove the panel. Turn the speaker unit to counterclockwise direction while inserting a flat-bladed screwdriver into one of the hollows around speaker unit, and then remove the speaker unit. After replacing the speaker unit, install it turning to clockwise direction until "click" sound comes out. Fig-1 Fig-2 Fig-3 How to Attach the PANEL, FR Attach the PANEL, FR to the PANEL, SPKR. Tap the four corners of the PANEL, FR with the plastic hammer to fit the PANEL, FR into the PANEL, SPKR completely. 44 https://manual-hub.com/ SPEAKER PARTS LIST (SX-NAJ801<YUSC / YUSC9>) REF. NO. 1 2 3 4 5 PART NO. KANRI DESCRIPTION NO. 8B-NSH-001-010 PANER,FR 8A-NSJ-006-010 BADGE,AIWA S35 8B-NSH-007-010 PANEL,DUCT 8B-NSH-008-010 PROTECTOR, 8B-NSH-602-010 SPKR, W 160 35/4 6 8B-NSK-604-010 SPKR, T 60 REF. NO. PART NO. KANRI NO. DESCRIPTION SPEAKER PARTS LIST (SX-WNSZ800<YLSL>) REF. NO. 1 2 3 4 5 PART NO. KANRI DESCRIPTION NO. 8B-NS7-001-010 PANEL,FR 8B-NS7-002-010 PANEL,SP A 8B-NS7-003-010 PANEL,SP B 8B-NS7-004-010 PANEL,DUCT 8B-NS7-005-010 PANEL,BA A 6 8B-NS8-007-010 7 8B-NS7-602-010 8 8B-NS8-604-010 9 88-NSK-610-010 10 88-NS5-610-010 PROTECTOR,M SPKR, W 200R 35/4 SPKR, M 100W SPKR, CERAMIC ASSY CORD,SPKR 11 8B-NS7-016-010 RING,TW SPEAKER PARTS LIST (SX-S85) REF. NO. 1 2 3 4 PART NO. KANRI DESCRIPTION NO. 8B-NS7-009-010 PANEL,FR 8B-NS7-011-010 GRILLE,FRAME ASSY 8B-NS7-606-010 SPKR, 80 8B-NS7-610-010 CORD,5.0 ACCESSORIES / PACKAGE LIST REF. NO. 1 1 2 3 4 PART NO. KANRI DESCRIPTION NO. 8B-NF7-902-010 IB,LH(ESP)M<LH> 8B-NF7-903-010 IB,U(ESF)M<U> 87-A92-150-010 ANT,LOOP AM NO-CONT 8B-NF7-701-010 RC UNIT,RC-BAS01 87-043-115-010 ANT,FEEDER FM ! 5 87-A91-017-010 PLUG,CONVERSION JT-0476<LH> 45 https://manual-hub.com/ 9820572 0251431 211, IKENOHATA 1CHOME, TAITO-KU, TOKYO 110, JAPAN TEL:03 (3827) 3111 Printed in Singapore https://manual-hub.com/