Instructions for LUXON models including: A19E26 Series Radar Motion Sensor Light Bulb, A19E26 Series, Radar Motion Sensor Light Bulb, Motion Sensor Light Bulb, Sensor Light Bulb, Light Bulb, Bulb
LUXON Radar Motion Sensor Light Bulbs,Dusk to Dawn LED Bulbs 5W 6000K Cool White,A19 E26 Base Night Lights Auto On/Off for Indoor Outdoor Basements, Porch,Courtyards, Garage Pack of 2
Every time re-install, the sensor bulb will keep lighting up for 40-60s. 10. Make sure the installation distance between the 2 bulbs is more than 25ft. 11. It ...
LUXON IMPORTANT SAFTGUARDS Radar Motion Sensor LED Bulb Series WARNING - Risk of fire or electric shock. Disconnect power at fuse or circuit breaker before installing or servicing. READ AND FOLLOW ALL SAFETY INSTRUCTIONS 1. WARING - Risk of fire or electric shock. LED bulb installation requires knowledge of electrical systems. If not qualified,do not attempt installation. Contact a qualified electrician. 2. WARING - To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects. 3. Each light bulb should be installed in a matching lamp base. 4. To prevent electrical shock, make sure the power is off before installing. 5. Try to avoid touching the surface of the led bulb with your hands after lighting the bulb. 6. Suitable for indoor locations only. 7. Please don't squeeze the bulb when installing to prevent damaging the bulb or injuring your finger. 8. The product should not be installed in places where high temperature or corrosive present. 9. Every time re-install, the sensor bulb will keep lighting up for 40-60s. 10. Make sure the installation distance between the 2 bulbs is more than 25ft. 11. It will not work when covered with a glass or closed fixture,make sure bulb top is completely exposed 12. We do not advise installing the bulb into an enclosed fixture or clear glass cover due to it will reduce motion detection radius,If you have to do this to avoid getting wet, leave the motion sensor exposed so it can detect motion well. TO INSTALL: Step1: Make sure the power is off before installing to avoid electrical shock and burn out the light fixture. Should be installed downward and the best height is 10 feet Step2: Please check the specification and your fixture to make sure it is compatible. Step3: Installing the led bulb into the socket by moving clockwise follow example pictures. 1 LUXON Radar Motion Sensor LED Bulb Series Step4: Every time re-install, the sensor bulb will keep lighting up for 40-60s. Step5: After installed,The bulb will keep lighting for 40-60s, PER FIRST INSTALLED WITHOUT detecting any motion in sensor area (If there is any object moving, The bulb will always keep lighting until without any detecting motion--only for first installation ), and then turns off automatically, it only turns on in the dark and dusk when detecting motion. The bulb automatically turns on when it detecting any object moving in the dark and turns off 30 seconds after you leave the area Model Radar Motion sensor bulb Input volts 85-260V/AC ELECTRICAL RATINGS Sensing Angle Install Height Sensing Distance 180° 10 FT 13-26 FT Specification: Product size: 60*110mm Power: 5W Voltage: 85-265V AC Power Supply: IC Constant Current Power Supply Light source: LED chip Luminous flux: 450lm Color temperature: 2700K CRI:80 Dimmable : No Lamp socket: E26 Light emitting angle: 180° Sensitivity image: 2 bulbs spacing More than 25 FT Automatic on/off within less than 5-10Lux light intensity 2WPS 文字