Omcan
OmcanOmcan
Instruction Manual for OMCAN models including: PM-CN-0150, PM-CN-0150-S, 44520, 46587, Pasta Sheeter with 5.75-Inch Roller Width
File Info : application/pdf, 12 Pages, 1.76MB
DocumentDocumentPasta Sheeters Models PM-CN-0150, 0150-S Items 44520, 46587 Instruction Manual Revised - 02/04/2022 Toll Free: 1-800-465-0234 Fax: 905-607-0234 Email: service@omcan.com www.omcan.com Table of Contents Model PM-CN-0150 / Model PM-CN-0150-S Section Page General Information --------------------------------------------------------------------------- 3 - 4 Safety and Warranty --------------------------------------------------------------------------- 4 - 5 Technical Specifications -------------------------------------------------------------------------- 6 Operation --------------------------------------------------------------------------------------------- 6 Maintenance ----------------------------------------------------------------------------------------- 7 Parts Breakdown ----------------------------------------------------------------------------- 8 - 10 Warranty Registration ---------------------------------------------------------------------------- 11 2 General Information Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan and Omcan Inc. are not responsible for any harm or injury caused due to any person's improper or negligent use of this equipment. The product shall only be operated by someone over the age of 18, of sound mind, and not under the influence of any drugs or alcohol, who has been trained in the correct operation of this machine, and is wearing authorized, proper safety clothing. Any modification to the machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of the machine while in operation. CHECK PACKAGE UPON ARRIVAL Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the external packaging, open carton to ensure all ordered items are within the box, and there is no concealed damage to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed), please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be filled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse for damaged products that were shipped collect or third party. Before operating any equipment, always read and familiarize yourself with all operation and safety instructions. Omcan would like to thank you for purchasing this machine. It's of the utmost importance to save these instructions for future reference. Also save the original box and packaging for shipping the equipment if servicing or returning of the machine is required. --------------------------------------------------------------------------------------------------------------------------------------------------Omcan Fabrication et distribution Companie Limité et Food Machinery d'Amerique, dba Omcan et Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu'un de plus de 18 ans, saine d'esprit, et pas sous l'influence d'une drogue ou d'acohol, qui a été formé pour utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modification de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine ou des personnes à proximité de la machine pendant son fonctionnement. VÉRIFIEZ LE COLIS DÈS RÉCEPTION Dès réception d'une expédition d'Omcan veuillez inspecter pour dommages externes. Si aucun dommage n'est visible sur l'emballage externe, ouvrez le carton afin de s'assurer que tous les éléments commandés sont dans la boîte, et il n'y a aucun dommage dissimulé à la machine. Si le colis n'a subi aucune mauvaises manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant d'accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager une réclamation auprès du transporteur. Un rapport détaillé sur l'étendue des dommages causés à la machine doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents d'expédition. Omcan n'a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli par un tiers transporteur. 3 General Information Avant d'utiliser n'importe quel équipement, toujours lire et vous familiariser avec toutes les opérations et les consignes de sécurité. Omcan voudrais vous remercier d'avoir choisi cette machine. Il est primordial de conserver ces instructions pour une référence ultérieure. Également conservez la boîte originale et l'emballage pour l'expédition de l'équipement si l'entretien ou le retour de la machine est nécessaire. --------------------------------------------------------------------------------------------------------------------------------------------------Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona mayor de 18 años, en su sano juicio y no bajo alguna influencia de droga o alcohol, y que este ha sido entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada. Cualquier modificación a la máquina anúla la garantía y puede causar daños a las personas usando la máquina mientras esta en el funcionamiento. REVISE EL PAQUETE A SU LLEGADA Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron a recoger por terceros. Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de funcionamiento y seguridad. Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el envío del equipo si servicio técnico o devolución de la máquina que se requiere. Safety and Warranty WARNING · Please ensure that the voltage of the outlet matches that of the unit. · Do not wear long sleeves, necklaces, hoods, or wear long hair loosely as it could cause a hazardous situation. · If the supply cord is damaged, it must be replaced by Omcan or one of it's qualified service agents. · The connection must be grounded. 4 Safety and Warranty · For indoor use only. · Ensure that children do not operate or play with the machine. · To protect against risk of electrical shock do not put any part of the appliance in water or other liquid. · Unplug from the outlet when not in use, before putting on or taking off parts, and before cleaning. · Do not leave appliance unattended. · Switch off the appliance before approaching parts which move in use. RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible. 1 YEAR PARTS AND LABOUR WARRANTY Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop off to either an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the equipment. Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not improper use. Please see https://omcan.com/disclaimer for complete info. WARNING: The packaging components are classified as normal solid urban waste and can therefore be disposed of without difficulty. In any case, for suitable recycling, we suggest disposing of the products separately (differentiated waste) according to the current norms. DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT! 5 Technical Specifications Model Color Electrical Roller Width Dimensions Packaging Dimensions Weight Packaging Weight Item Number PM-CN-0150 PM-CN-0150-S Red Silver 120V / 60Hz / 1 5.75" / 146mm 11.5" x 9" x 11" / 293 x 228 x 278mm 11.7" x 9" x 11" / 298 x 233 x 283mm 16.5 lbs. / 7.5 kgs. 17.6 lbs. / 8 kgs. 44520 46587 Operation BEFORE FIRST USE Clean the machine with a clean, dry cloth before your first use. In order to clean the roller and cutter, you can pass a small quantity of dough through them several times. Then discard the dough. TO USE 1. Cut the dough into manageable pieces with a knife. 2. Pull the knob and turn to "1", let the two rollers completely open (about 2.5mm). 3. Put the two covers over the wide and narrow cutters, turn on the switch and pass a piece of dough through the roller. Sprinkle some flour on the dough if necessary. 4. Repeat the operation 2-3 times. 5. When the dough has taken a regular shape, adjust the knob to "2". Then repeat until you achieve the desired thickness. 6. Put the dough into the wide cutter to achieve wide noodles. Alternatively, put the dough into the narrow cutter to achieve narrow noodles. NOTE · If the cutters can't cut, it means the dough is too soft and you should pass the dough through the rollers with flour several times. · If the dough is too hard and the machine can't operate, please put the dough into a bowl and mix in more water. · The work time of the machine cannot exceed 15 minutes at a time. · Do not adjust the knobs while the machine is in use. 6 Maintenance · Unplug the unit before cleaning and performing maintenance. · Use a soft and dry cloth to clean the machine after use. · Never wash the machine with water or in a dishwasher. · Use a brush to clean the cutters and rollers after use. · If necessary or if the rollers squeak, you can lubricate the rollers with food safe oil. · Don't insert knives or cloths in between the rollers. · It is advisable to store the machine and accessories in the original box after using. · All repairs are to be performed by a qualified technician. · Do not dismantle the machine, doing so could be hazardous and void the warranty. 7 Parts Breakdown Model PM-CN-0150 44520 Model PM-CN-0150-S 46587 8 Model PM-CN-0150 44520 Parts Breakdown Item No. Description AI993 Right Cover for 44520 AI994 AI995 AI996 AI997 Gear Rack I, Screw (6pc), Spring Pad (6pc), Flat Pad (6pc) for 44520 One Stage Transmission Gear, Two Stage Transmission Gear, Three Stage Transmission Gear (4pc) for 44520 Gear Shaft II, Steering Ring (1pc) for 44520 Gear Shaft I, Cylindrical Pin (1pc) for 44520 AI998 Shore III (6pc) for 44520 AI999 Binding Bolt M5 (2pc) for 44520 AJ000 Eccentric Shaft for 44520 AJ001 AJ002 AJ003 AJ004 AJ005 AJ006 AJ007 AJ008 AJ009 M6 Long Double Threaded Screw (2pc) for 44520 M5 Long Double Threaded Screw for 44520 Electric Motor, Screw (6pc), Spring Pad (4pc) for 44520 Right Bracket for 44520 Axle Sleeve (2pc) for 44520 Eccentric Bushing for 44520 Surface Cover (2pc) for 44520 Cover of Forearm, Cover of Rear Arm, Cover of Left Arm, Cover of Right Arm, Screw (4pc) for 44520 Front Baffle for 44520 AJ010 AJ011 AJ012 AJ013 AJ014 Mid Baffle for 44520 Small Intermediate Baffle for 44520 Back Baffle for 44520 Left Bracket for 44520 Cutter Gear (4pc), Axial Ring File (4pc) for 44520 Position Item No. Description 1 AJ015 Roller Gear (2pc) for 44520 2 AJ016 Adjusting Bracket, Nut (2pc), Wedge (21pc) for 44520 Position 23 24 3 AJ017 Eccentric Shaft for 44520 25 4 AJ018 Left Cover Frame, Screw (2pc), Grooved Metal Gasket (2pc) for 44520 26 5 AJ019 Switch Frame, Tapping Screw with Pad (2pc) for 44520 27 6 AJ020 Touch Switch, Tapping Screw (2pc) for 44520 28 7 AJ021 Switch for 44520 29 8 AJ022 Left Cover, Tapping Screw (2pc) for 44520 30 9 AJ023 Adjusting Plate for 44520 31 10 AJ024 Adjusting Handle, Screw (1pc) for 44520 32 11 AJ025 Round Spring for 44520 33 12 AJ026 Button Switch (Four Second) for 44520 34 13 AJ027 Power Line Deduction (6N-4) for 44520 35 14 AJ028 Screw Hole Pillar (2pc) for 44520 36 15 AJ029 Power Line for 44520 37 Wiring Terminal, Connecting Line I, 16 AJ030 Connecting Line II, Connecting Line III, 38 Tapping Screw (2pc) for 44520 17 AJ031 Wire Holder, Screw (2pc) for 44520 39 18 AJ032 Rubber Sleeve for 44520 40 19 AJ033 Roller Spring Clip (2pc) for 44520 41 20 AJ034 Cutter Spring Clip (2pc) for 44520 42 21 AJ035 Roller Chief Axis, Roller Auxiliary Axis, Bulkhead for 44520 43 22 AJ036 Cutter Chief Axis (6), Cutter Auxiliary (6) for 44520 44 Item No. Description AJ037 Cutter Chief Axis (2), Cutter Auxiliary (2) for 44520 Position 45 AJ038 150 Scraping Knife (2pc) for 44520 46 AJ039 Combs 6 (2pc) for 44520 47 AJ040 AJ041 AJ042 AJ043 AJ044 AJ045 AJ046 AJ047 AJ048 AJ049 AJ050 AJ051 AJ052 AJ053 AJ054 AJ055 AJ056 AJ057 Combs 2 (2pc) for 44520 48 Lampstand for 44520 49 Breathable Sheet for 44520 50 Bottom Board (2pc), Self Tapping Screw (4pc) for 44520 51 Straw (4pc), Self Tapping Screw (4pc) for 44520 52 Gear Rack II, Nut (3pc), Screw (2pc), Spring Pad (5pc), Flat Pad (5pc) for 53 44520 Inserts (11pc) for 44520 54 Short Sleeve for 44520 55 Gear Shaft III (3pc), Cylindrical Pin (3pc) for 44520 56 Shore I (3pc) for 44520 57 Shore II (2pc) for 44520 58 Layer of Output Shaft, Cylindrical Pin (2pc), Adjusting Wedge for 44520 59 Dowel (2pc), Distance Piece for 44520 60 Output Gear, Mid Gear, Helical Gear for 44520 61 Gear Rack III, Screw (5pc), Spring Pad (5pc) for 44520 62 Fixed Plate Set (4pc) for 44520 63 Damping Pad (5pc) for 44520 64 Motor Cover for 44520 65 9 Parts Breakdown Model PM-CN-0150-S 46587 Item No. Description AJ058 Right Cover for 46587 AI994 AI995 AI996 AI997 Gear Rack I, Screw (6pc), Spring Pad (6pc), Flat Pad (6pc) for 46587 One Stage Transmission Gear, Two Stage Transmission Gear, Three Stage Transmission Gear (4pc) for 46587 Gear Shaft II, Steering Ring (1pc) for 46587 Gear Shaft I, Cylindrical Pin (1pc) for 46587 AI998 Shore III (6pc) for 46587 AI999 Binding Bolt M5 (2pc) for 46587 AJ000 Eccentric Shaft for 46587 AJ001 AJ002 AJ003 AJ004 AJ005 AJ006 AJ007 AJ059 AJ009 M6 Long Double Threaded Screw (2pc) for 46587 M5 Long Double Threaded Screw for 46587 Electric Motor, Screw (6pc), Spring Pad (4pc) for 46587 Right Bracket for 46587 Axle Sleeve (2pc) for 46587 Eccentric Bushing for 46587 Surface Cover (2pc) for 46587 Cover of Forearm, Cover of Rear Arm, Cover of Left Arm, Cover of Right Arm, Screw (4pc) for 46587 Front Baffle for 46587 AJ010 AJ011 AJ012 AJ013 AJ014 Mid Baffle for 46587 Small Intermediate Baffle for 46587 Back Baffle for 46587 Left Bracket for 46587 Cutter Gear (4pc), Axial Ring File (4pc) for 46587 Position Item No. Description 1 AJ015 Roller Gear (2pc) for 46587 2 AJ016 Adjusting Bracket, Nut (2pc), Wedge (21pc) for 46587 Position 23 24 3 AJ017 Eccentric Shaft for 46587 25 4 AJ018 Left Cover Frame, Screw (2pc), Grooved Metal Gasket (2pc) for 46587 26 5 AJ019 Switch Frame, Tapping Screw with Pad (2pc) for 46587 27 6 AJ020 Touch Switch, Tapping Screw (2pc) for 46587 28 7 AJ021 Switch for 46587 29 8 AJ060 Left Cover, Tapping Screw (2pc) for 46587 30 9 AJ023 Adjusting Plate for 46587 31 10 AJ024 Adjusting Handle, Screw (1pc) for 46587 32 11 AJ025 Round Spring for 46587 33 12 AJ026 Button Switch (Four Second) for 46587 34 13 AJ027 Power Line Deduction (6N-4) for 46587 35 14 AJ028 Screw Hole Pillar (2pc) for 46587 36 15 AJ029 Power Line for 46587 37 Wiring Terminal, Connecting Line I, 16 AJ030 Connecting Line II, Connecting Line III, 38 Tapping Screw (2pc) for 46587 17 AJ031 Wire Holder, Screw (2pc) for 46587 39 18 AJ032 Rubber Sleeve for 46587 40 19 AJ033 Roller Spring Clip (2pc) for 46587 41 20 AJ034 Cutter Spring Clip (2pc) for 46587 42 21 AJ035 Roller Chief Axis, Roller Auxiliary Axis, Bulkhead for 46587 43 22 AJ036 Cutter Chief Axis (6), Cutter Auxiliary (6) for 46587 44 Item No. Description AJ037 Cutter Chief Axis (2), Cutter Auxiliary (2) for 46587 Position 45 AJ038 150 Scraping Knife (2pc) for 46587 46 AJ039 Combs 6 (2pc) for 46587 47 AJ040 AJ061 AJ042 AJ043 AJ044 AJ045 AJ046 AJ047 AJ048 AJ049 AJ050 AJ051 AJ052 AJ053 AJ054 AJ055 AJ056 AJ057 Combs 2 (2pc) for 46587 48 Lampstand for 46587 49 Breathable Sheet for 46587 50 Bottom Board (2pc), Self Tapping Screw (4pc) for 46587 51 Straw (4pc), Self Tapping Screw (4pc) for 46587 52 Gear Rack II, Nut (3pc), Screw (2pc), Spring Pad (5pc), Flat Pad (5pc) for 53 46587 Inserts (11pc) for 46587 54 Short Sleeve for 46587 55 Gear Shaft III (3pc)-Cylindrical Pin (3pc) for 46587 56 Shore I (3pc) for 46587 57 Shore II (2pc) for 46587 58 Layer of Output Shaft, Cylindrical Pin (2pc), Adjusting Wedge for 46587 59 Dowel (2pc), Distance Piece for 46587 60 Output Gear, Mid Gear, Helical Gear for 46587 61 Gear Rack III, Screw (5pc), Spring Pad (5pc) for 46587 62 Fixed Plate Set (4pc) for 46587 63 Damping Pad (5pc) for 46587 64 Motor Cover for 46587 65 10 Warranty Registration Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at the perforation and then send to the address specified below. You can also register online by visiting: Merci d'avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la carte au niveau de la perforation, puis l'envoyer à l'adresse spécifié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant: Gracias por comprar un producto Omcan usted. Para registrar su garantía para este producto, complete la información a continuación, cortar la tarjeta en la perforación y luego enviarlo a la dirección indicada a continuación. También puede registrarse en línea en: https://omcan.com/warranty-registration/ For mailing in Canada Pour postale au Canada Por correo en Canadá OMCAN PRODUCT WARRANTY REGISTRATION 3115 Pepper Mill Court, Mississauga, Ontario Canada, L5L 4X5 For mailing in the US Pour diffusion aux États-Unis Por correo en los EE.UU. OMCAN PRODUCT WARRANTY REGISTRATION 4450 Witmer Industrial Estates, Unit 4, Niagara Falls, New York USA, 14305 or email to: service@omcan.com Purchaser's Information Name: Address: City: Country: Province or State: Postal or Zip: Dealer from which Purchased: Dealer City: Invoice: Dealer Province or State: Company Name: Telephone: Email Address: Type of Company: Restaurant Bakery Butcher Supermarket Institution (specify): Other (specify): Deli Caterer Model Name: Machine Description: Date of Purchase (MM/DD/YYYY): Would you like to extend the warranty? Yes No Model Number: Serial Number: Date of Installation (MM/DD/YYYY): Thank you for choosing Omcan | Merci d'avoir choisi Omcan | Gracias por elegir Omcan 11 Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North American food service industry. Our success over these many years can be attributed to our commitment to strengthen and develop new and existing relationships with our valued customers and manufacturers. Today with partners in North America, Europe, Asia and South America, we continually work to improve and grow the company. We strive to offer customers exceptional value through our qualified local sales and service representatives who provide convenient access to over 6,500 globally sourced products. Depuis 1951 Omcan a grandi pour devenir un des "leaders" de la distribution des équipements et matériel pour l'industrie des services alimentaires en Amérique du Nord. Notre succès au cours de ces nombreuses années peut être attribué à notre engagement à renforcer et à développer de nouvelles et existantes relations avec nos clients et les fabricants de valeur. Aujourd'hui avec des partenaires en Amérique du Nord, Europe, Asie et Amérique du Sud, nous travaillons continuellement à améliorer et développer l'entreprise. Nous nous efforçons d'offrir à nos clients une valeur exceptionnelle grâce à nos ventes locales qualifiées et des représentants de service qui offrent un accès facile à plus de 6500 produits provenant du monde entier. Desde 1951 Omcan ha crecido hasta convertirse en un líder en la distribución de equipos y suministros de alimentos en América del Norte industria de servicios. Nuestro éxito en estos años se puede atribuir a nuestro compromiso de fortalecer y desarrollar nuevas relaciones existentes con nuestros valiosos clientes y fabricantes. Hoy con socios de América del Norte, Europa, Asia y América del Sur, que trabajan continuamente para mejorar y crecer la empresa. Nos esforzamos por ofrecer a nuestros clientes valor excepcional a través de nuestro local de ventas y representantes de los servicios que proporcionan un fácil acceso a más de 6,500 productos con origen a nivel mundial.