INSTALLATION GUIDE

Hood

Luna Series

This section provides dimensional information for the Luna Series hood installation.

Overall Dimensions:

• Width: 895mm
• Depth: 440mm
• Height: 1120mm (total, including decorative cover and pipe section)
• Hood Body Height: 560mm
• Wall Mounting Bracket Height: 328mm
• Pipe Diameter: 180mm (Φ180)
• Decorative Cover Thickness: 18mm
• Distance from Ceiling to Hood: 190mm (for decorative cover)

Mounting Height:

• The distance from the pan support of the hob to the bottom of the hood should be between 750mm and 800mm.
• The overall height from the hob support to the ceiling can range from 800mm to 850mm.
• The distance from the ceiling to the decorative cover is approximately 655mm.

Diagram Description:

The diagram illustrates the vertical and horizontal measurements for installing the range hood. It shows the hood unit, the decorative cover, the ventilation pipe, and its connection to the ceiling. Key dimensions are labeled with numerical values and units (mm). The lower part of the diagram shows the hood mounted above a kitchen counter, with a pipe extending upwards through a decorative cover to the ceiling. A side view shows the vertical mounting options and distances relative to the ceiling and the hob.