H96 Max H313 Android TV Stick User Manual

Safety Instructions

WARNING!

• Presence of live parts inside the device! Do not open. Risk of electric shock!
• No parts should be repaired by users.
• Place the device on a flat, firm and stable surface. Do not put it on a carpet or rug.
• Place the device in a well-ventilated location to prevent the accumulation of internal heat.
• Protect the device from high temperatures, humidity, water and dust.
• Do not place any objects near your device that may damage it (e.g., liquid-filled objects or candles).
• Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cab, ni-mh, etc.) batteries.

App Services

Access to streaming services like Movies & TV, Shop, QIYI, HBO, CO, prime video, ABEMA, YouTube, NETFLIX, and Google Play.

Accessory List

Please open the package and check the following accessories:

• TV Stick
• Remote Control
• Power Adapter
• User Manual

Hardware Structure

Product Interface Introduction:

• TV Stick: Features a USB port, HD output.
• Remote Control: Includes Power ON/OFF, Voice, Menu, OK, Mouse, Arrow keys, Back, Del, Home, Channel Up/Down, Volume +/-, and Volume Mute buttons.

System Connection

1. Connect the TV Stick to the HD input port of the TV set.
2. Connect the TV Stick to the power supply.
3. Switch on the TV Stick and connect it to the network via WiFi.
4. Open any TV or movie you want to see.

Bluetooth Pairing Method

For the first pairing: Place the remote control near the TV stick. Press and hold the [LEFT] and [RIGHT] buttons on the remote control for about 10 seconds simultaneously. The red light on the remote control will flash constantly, then release to automatically enter pairing mode.

Second pairing (Bluetooth reconnection): Press any button on the remote control to reconnect.

Remote Indicator Status:

• Infrared status: When infrared is emitted, the LED blinks 2 times continuously when the key is pressed; the LED goes out when the key is pushed up.
• Bluetooth status: When sending Bluetooth, the LED will be on when the button is pressed; the LED will be off when the button is pushed up.

Troubleshooting

• No display after power on? Confirm your device is connected to the TV well and set the correct HD Input from your TV configuration.
• TV has images but no sound? Make sure your TV is not in mute and the volume is not too low.
• Fail to connect to the network? Ensure the Ethernet cable is properly connected. Verify Wi-Fi is functional and your TV stick has a strong enough signal from your router.
• Remote control failure?
  • Replace the battery of the remote control with a new one, ensuring correct polarity.
  • Make sure the remote control is within the range of the TV stick.
  • Go to the Setting menu to unpair and re-pair the remote control.

Please use the provided accessories to avoid any risk.

FCC Compliance Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.

CE FC ROHS MADE IN CHINA