User Manual for DT models including: NVR, 2AK6PNVR, NVR-0704mt Battery Camera Kit with Touchable Monitor, NVR-0704mt, Battery Camera Kit with Touchable Monitor, Battery Camera Kit, Camera Kit with Touchable Monitor, Camera Kit with Monitor, Camera, Camera Kit
Shenzhen DC Times Technology Co., Ltd NVR NVR 2AK6PNVR 2AK6PNVR nvr
File Info : application/pdf, 3 Pages, 760.74KB
DocumentDocument9 %DWWHU\FDPHUDNLWZLWKWRXFKDEOHPRQLWRUPDQXDO 1 Power interface: 1 hard disk with screen 12V/3A 2 Lock screen button: turn on/off screen display 3 USB interface: 1 USB 2.0 interface (support upgrade, and mouse) 4 Antenna: for wireless signal transmission 5 Microphone: support microphone voice intercom 6 Speaker: Audio output 7 Hard Disk: Support 2.5" 2TB SSD 4. Ope rationinst ruc t ion Model: NVR-0704mt Product name: Net Video Recorder Company: SHENZHEN DC Times Technology CO.,LTD Address: Floor 3, Building J, Jinchangda, No. 2000089, Shangwei industrial zone , Zhangkengjing community,Guanhu Town,Longhua New District,Shenzhen, Guangdong Province, China Statement It is highly appreciated for you buying our products.the main application of our product will be introduced in this guide.please feel free to contact us if you have any question,and further information will be found on our WEBSITE and technical supporting center.we will not give another information about the inaccurate content in this guide,since the product be updated or changed with software or hardware.If there is any discrepancy between the product description and the actual product, the actual product shall prevail. Safety Caution 1. In order to make the machine work normally for a long time, the machine should be placed in a relatively dry and dust-free space.Avoid short circuits caused by the machine being wet. 2. Check adaptor voltage, prevent damage device since using wrong adaptor. 3. The machine should work at the range of the temperature and humidity allowed by the technical index. 4. It should be avoid that the machine be set in the vibration environment. 5. Installation of the machine have to comply with local or national standard. Interface description NVR interface description Antenna HDD cover trumpet Mic-phone lock screen button Power supply USB interface HDMI CONNECT TO ROUTER IPC Mini NVR can be combined with different cameras to form a kit. The interface description below only takes common cameras as an example. Please refer to the actual interface position of the camera in the package. Preview interface Click on the screent and it will pop up menu button" ", click " " to open or close the preview interface channel volume,click " " zoom button on single screen, enter into the magnification screen to display it,click " " to enter into the main menu interface, click " " to enter into the video playback interface,click " " to enter into PTZ control interface. LED Indicator Camera Lens IR Lamp Speaker White Light PIR Sensor SD Card Slot Microphone USB Port Reset Hole Power Button Charging Status The instructions of LED light : Blink Slowly in Red: Awaiting Wi-Fi connection, ready for adding devices Blink Fast in Red: Wi-Fi connecting Solid in Red: Network problem Solid in Blue: Wi-Fi connected, camera running normally Blink Slowly in Blue: Firmware update %XWWRQRSHUDWLRQIRU7ZREXWWRQPRGHO Power Button: Keep pressing for 5-10 seconds to power on/power off Reset Button: Keep pressing for 5-10 seconds to reset 3'&YQPTVSF8BSOJOH4UBUFNFOUT 5IJTFRVJQNFOUDPNQMJFTXJUI'$$SBEJBUJPOFYQPTVSFMJNJUTTFUGPSUIGPSBO VODPOUSPMMFEFOWJSPONFOU5IJTFRVJQNFOUTIBMMCFJOTUBMMFEBOEPQFSBUFEXJUI NJOJNVNEJTUBODFDNCFUXFFOUIFSBEJBUPSCPEZ Main menu Video playback: Play recorded video System setup: System related settings (language, time, network settings, etc.) Record setup: Set the recording schedule, TF card information and formatting Match code: Sdd camera Alarm setup: Set mobile alarm, APP alarm and other functions System manage: system information, factory settings, host upgrade, IPC upgrade, etc. Add wireless camera Before leaving factory, the camera has been matched with Wireless NVR with Touch screen, the image will come out when the kit is powered. If users need to re-match code, please operate as below QUICK USER GUIDE Step 1: The user star the recorder and camera, and the IPC reset enters the code mode. Step 2: Enter the code interface, click on the code to match. Tips: 1). The camera can only perform the pairing in the reset state; the camera usually presses the reset button to perform the pairing code. 2). If the camera still does not match the code after the code has timed out, click "Match Code" again to try again. 3). If you need to replace a new camera, please click "X" to delete the channel and then click on the code to match. Wireless internet access Enter the main interface, select system settings, select wireless Internet access, and make wireless connection settings. Step 1: Open WLAN Step 2: Click "Hotspot list" to select the name of the wireless hotspotyou want to connect to. Step 3: Enter the correct password Step 4: Click "Back" exit to the wireless settings interface to view the wireless connection status, Indicates successful connection. Tips: After the network configuration is successful, wait a while (about ten seconds), and wait until the network icon in the upper right corner change , this indicates that the device is online (APP can be viewed remotely). APP remote viewing video Download and install You can search for "EseeCloud" in App Store, App Store and other application markets to download. Or scan the QR code below to download. Note: Apple mobile phone system requires iOS system 9.0 or above, Android mobile phone system requires Android 5.1 or above. View video screen and video playback Device List Click the device card to enter the video preview interface, select View Playback to view the channel video recording of the recorder. (VHH&ORXG $33GRZQORDG 5HJLVWUDWLRQDQG/RJLQ 1). Click Register, input your mobile phone number/email, input the verification code, and complete the registration; 2). Enter your registered mobile phone number and password on the login interface, and click Login 3). Click the third-party application icon at the bottom of the login interface, and you can log in successfully after completing the authorization. Add device 1). Click "+ on the device list interface to add a camera; 2). Scan the QR code on the recorder (click the QR code icon in the lower left corner of the video preview interface); 3). Set the device name to add successfully. (Tips: Please make sure that your video recorder is connected to the Internet when using the EseeCloud APP to add and view the video recorder screen) Daily update maintenance Enter the main interface, select system management, enter into the system management interface. System info: Including device model, cloud ID, software version, etc. Factory setting: Includes simple restore and restore all settings Change password: Modify the remote access login password Upgrade: Device-side main engine upgrade IPC upgrade: Upgrade the camera Extend Wireless Range As can be seen from the bar antenna gain chart as shown on the right, the signal coverage of the antennais similar to anapple. The antenna is located in the center of the apple,and the signal around the antennais strong. The upper and lower ends of the antenna are recessed, and the signal is weak. Reasonably adjust the antenna and optimize the signal radiation direction As can be seen from the bar 5dB 3dB Best signal direction Worst signal direction antenna gain chart as shown on the right, the signal coverage of the antennais similar to anapple. The antenna is located in the Relationship between rod antenna gain and coverage center of the apple,and the signal around the antennais strong. The upper and lower ends of the antenna are recessed, and the signal is weak. According to the signal transmission characteristics of the antenna, in order to ensure the optimal image transmission effect of the wireless NVR Kit, it is required: 1. The antennas of the NVR and IPC should be placed in a high and open place, and not near the walls, metal, glass and other obstacles, which will affect the signal's outward divergence. 2. The antenna of the IPC should be placed in parallel with the NVR antenna as much aspossible so that the respective maximum radiation direction angles are opposite to formthe maximum signal coverage, as shown in the figure below. correct method fault method FAQ Q: Does the battery support charging? How to charge? A: Support charging, battery switch to "OFF", connect to the power adapter. Q: How long does the fully charged battery work? A: Generally it can reach about 1-2 hours (When you need to use battery power, you need to turn the battery switch to "OFF", connect the external power supply and activate it before it can be used normally.). Q: Does it support voice intercom, how to talk? A: Support voice intercom, select the intercom IPC channel, zoom in, click the intercom icon,long press the icon to speak, the intercom function can be realized; when released, the speech ends. Q: How to turn the alarm sound/doorbell button prompt on or off? A: Enter the main menu, select the alarm setting, adjust the alarm volume, set the alarm volume to 0, mean turn off all alarm sounds; set to non-zero value, mean the alarm sound turned on. Wa r ning Warning Notes: Device will not in guarantee if caused by below reason: 1 Accident;negligence;disaster;mis-operation. 2 Do not conform to the environment and conditions,such as power improper,working temperature too hight or too low,lightning stroke.ect. 3 Ever be maintained by other center which not belong to the real factory. 4 Goods already sold more than 12 months. FCC RADIATION NORM FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation. FCC Compliance Statement These limits are designed to provide reasonable protection against frequency interference in residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed or used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in television reception, which can be determined by turning the equipment off and on. The user is encouraged to try and correct the interference by one or more of the following measures: ·Reorient or relocate the receiving antenna. · Increase the separation between the equipment and the receiver. ·Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ·Consult the dealer or an experienced radio/TV technician for help. CAUTION! The Federal Communications Commission warns the user that changes or modifications to the unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested andfound to comply with the limits for a Class B digital device, pursuant to part 15 of theFCC Rules. These limits are designed to providereasonable protection against harmfulinterference in a residential installation. This equipment generates,uses and can radiateradio frequency energy and, if not installedand used in accordance with the instructions,may cause harmful interference to radio communications. However, there isno guarantee that interference will not occurin a particular installation. If this equipmentdoes cause harmful interference toradio or television reception, which can bedetermined by turning the equipment off andon, the user is encouraged to try to correctthe interference by one or more of the followingmeasures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipmentand receiver. --Connect the equipment into an outlet on acircuit different from that to which the receiveris connected. --Consult the dealer or an experienced radio/TV technician for help. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. YNNHAcrobat Distiller 11.0 (Windows)