Instruction Manual for SERCOMM models including: Indoor Security Camera, Security Camera, Camera
21 hours ago — Do not install the device in an area where condensation occurs. ○ To prevent the temporary loss of guide data and cause a temporarily non-responding Device, do ...
9 hours ago — IMPORTANT SAFETY INSTRUCTIONS. ○ Read these instructions. ○ Keep these instructions. ○ Heed all warnings. ○ Follow all instructions.
IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. IMPORTANT SAFETY CONSIDERATIONS FOR INDOOR CAMERA The mains plug is the main disconnect device. It shall remain readily accessible and operable. The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. See label on bottom of unit for additional markings. During Transportation to the Subscriber Home Transport the cable Device in its shipping box or an equally padded container. Do not expose the Device to rain or moisture. During Installation Do not place the device in an enclosed area where the cooling vents are blocked or impede the flow of air through the ventilation openings. Install the device so that its position does not interfere with its proper ventilation. For example, do not place the device on a bed, sofa, rug, or similar surface that could block the ventilation openings. Install the device so that there is a minimum of two inches of space between surrounding surfaces and the top, left, and right sides of the Device to ensure proper ventilation. Install the device away from heat sources such as radiators, heat registers and stoves. Installation of the device near consumer electronics devices, such as stereo receiver/amplifiers and televisions, is permitted as long as the air surrounding the Device does not exceed 40º C (104º F). Place the device on a flat surface not prone to vibration or impact. Do not place the device on top of another electronic device. Do not install the device in an area where condensation occurs. To prevent the temporary loss of guide data and cause a temporarily non-responding Device, do not plug the AC power cord into a switched power Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Country Code selection feature to be disabled for products marketed to the US/CANADA Industry Canada statement: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: · This device may not cause interference · This device must accept any interference, including interference that may cause undesired operation of the device Caution: (i) the device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; Operations in the 5.25-5.35GHz band are restricted to indoor usage only. Radiation Exposure Statement: This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. SPECIAL SYMBOLS THAT MIGHT APPEAR ON THE EQUIPMENT The exclamation point, within an equilateral triangle, is intended to alert the user to the presence of important installation, servicing, and operating instructions in the documents accompanying the equipment. This symbol indicates that dangerous voltage levels are present within the equipment. These voltages are not insulated and may be of sufficient strength to cause serious bodily injury when touched. The symbol may also appear on schematics. CARING FOR THE ENVIRONMENT BY RECYCLING When you see this symbol on an SERCOMM product, do not dispose of the product with residential or commercial waste. Recycling your SERCOMM Equipment Please do not dispose of this product with your residential or commercial waste. Some countries or regions, such as the European Union, have set up systems to collect and recycle electrical and electronic waste items. Contact your local authorities for information about practices established for your region.適用於 Microsoft 365 的 Microsoft Word