MONSTER Airmars XKT03 Bluetooth Wireless Headphones Instruction Manual

Contents

• 1 MONSTER Airmars XKT03 Bluetooth Wireless Headphones
• 2 Product parameters
• 3 Packing list
• 4 Product Schematic Description
• 5 Product operating instructions
• 6 Operation
• 7 Documents / Resources
• 8 Related Posts

1 MONSTER Airmars XKT03 Bluetooth Wireless Headphones

Image: A pair of white wireless earbuds housed within a compact charging case. The MONSTER logo is visible on the charging case lid.

The MONSTER Airmars XKT03 are Bluetooth wireless headphones designed for portable audio enjoyment.

2 Product parameters

• Transmission distance: ≥10m
• Driver diameter: Φ13mm
• Driver impedance: 32Ω±15%
• Sensitivity: 115±1.5dB
• Frequency response range: 20Hz-20kHz
• Battery capacity (charging case): 3.7V 300mAh
• Battery capacity (Headphone): 3.7V 30mAh
• Charging time (charging case): ≈1.5 hours
• Music playtime (headphone): ≈4 hours
• Music playtime with charging case: ≈24 hours

3 Packing list

The package includes the following items:

• Headphones: 2 units
• Charging case: 1 unit
• Instructions Manual: 1 unit
• Type-C charging cable: 1 unit

Visual representation of packing list items:

• Two wireless earbuds
• One charging case
• One instruction manual booklet
• One Type-C charging cable

4 Product Schematic Description

Headphone Components:

• Indicator light
• Multi-function buttons (MFB)
• Microphone pickup hole

Charging Case Components:

• Battery compartment
• Charging case indicator
• Charging indicator

Charge the charging case

Connect the charging case to a 5V power adapter using the provided Type-C charging cable.

Diagram description: A visual shows the charging case connected via a Type-C cable to a power source (represented by a USB port on an adapter). Input ratings are indicated: 5V=30mA (Headphone) and 5V=300mA (charging case).

? Tip: When the ice blue indicator flashes while closing the cover, please charge in time.

Indicator guide

5 Product operating instructions

Power on

Open the charging case, and the headphones will turn on automatically.

Power off

• Method 1: Place the headphones into the charging case and close the cover.
• Method 2: After being disconnected from the Bluetooth device for 3 minutes.

Pairing

• Method 1: Open the charging case; the headphones will start pairing automatically.
• Method 2: On your smart device's Bluetooth list, search for and select "Monster Airmars XKT03". A "Connected" prompt will be heard upon successful connection.

The headphones will attempt to reconnect to the device within 3 minutes if the connection is lost.

6 Operation

Note:

• Fully charge the headphones and power them off before an extended period of non-use.
• Unplug the charging cable after charging is complete.

Normal Mode Controls:

• Voice assistant: Press the left MFB for 2 seconds.
• Volume +: Click the right MFB.
• Volume -: Click the left MFB.

Music playback Controls:

• Pause/Play: Double-click the Left or Right MFB.
• Last song: Triple-click the left MFB.
• Next song: Triple-click the right MFB.

Phone Call Controls:

• Answer call: Double-click the left/right MFB.
• Reject call: Press the left/right MFB for 2 seconds.
• Hang up call: Double-click the left/right MFB.

Game/music switching:

Press the right MFB for 2 seconds to enter game mode.

Press the right MFB for 2 seconds to enter music mode.

Restore factory settings

If the headphones are not connected to the Bluetooth device when turned on, click the MFB 5 times to clear previous pairing information and turn off the headphones.

FCC Statement

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC ID: 2A8PV-QSMXKTO3

Precautions

1. Headphones will turn on automatically (no button press needed) and pair with the device when the charging case is opened. After placing the headphones in the charging case, they will turn off, and automatic charging will start when the cover is closed.
2. Charging every 15 days will extend battery life when not in use often. Cleaning dirt off the charging contacts with cotton swabs with alcohol will maintain good contact for charging.
3. Keep the battery (battery pack) away from inflammables or excessive heat, such as direct sunlight.
4. Intermittent audio playback is normal for wireless products due to environmental factors, device brand, user behavior, etc.

Warnings

1. Do not use headphones at high volume for an extended period of time.
2. Keep the headphones away from dust and water.
3. Do not disassemble the headphones and accessories, otherwise, the warranty will be voided.
4. Keep headphones away from any impact or vibration.
5. Do not use any chemical solvents or cleaning agents on the headphones.

Hazardous Substances

This table is compiled according to SJ/T 11364.

Legend:

• O: Indicates that this hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in GB/T 26572.
• X: Indicates that this hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in GB/T 26572.

Environment Friendly Use Period (EFUP)

This logo refers to the period (10 years) during which the hazardous substances in electronic and electrical products will not leak or mutate, so that the use of these [substances] will not result in any severe environmental pollution, bodily injury, or damage to any assets.

Warranty Service

Dear user, this warranty card is the proof for your future warranty application. Please fill it out and keep it for future use with the seller!

User information

Product information

Vendor information

Certificate of Approval:

Product No: ___________

Production Time: ___________ [PASS]

QC: ___________

7 Documents / Resources

This section typically lists additional documentation or resources. The provided PDF does not contain specific links or details here, only the heading.

8 Related Posts

This section typically lists related articles or posts. The provided PDF does not contain specific links or details here, only the heading.