User Manual for Saramonic models including: BTW, Wireless Lavalier Microphone, Lavalier Microphone, Wireless Microphone, Microphone, BTW Microphone
BTW-Saramonic
wireless lavalier microphone manual
File Info : application/pdf, 14 Pages, 763.50KB
DocumentDocumentWireless Lavalier Microphone BTW User Manual Statement Please read this manual carefully before using and strictly operate and store in accordance with the instructions. Please save it for your future reference. If the user manual can not help you to solve certain problems, please ask your retailer for help or email us: info@saramonic.com. Cautions 1. Please do not dismantle the outer case. 2. Don't place this unit close to heat sources such as heater, oven, or other devices that produce heat. 3. Please do not replace the battery on your own. 4. Only use a soft, dry cloth to clean the product. 5. When using and storing, please pay attention to dust and moisture. General Introduction The BTW is a compact and portable wireless lavalier microphone. It features an omnidirectional microphone capsule, which delivers clear and intelligible sound. The BTW can work in tandem with third-party apps for audio/video recording. It is compatible with both iOS and Android devices. With an operating range of up to 80m, the BTW is ideal for content creation, live streaming, interviews, online class, etc. 01 Product Structure 02 Power Button Function Power ON Operation Press and hold the button for 2 seconds Power OFF Press and hold the button for 3 seconds Play/Pause Short press the button (successfully connected) Clear Pairing Records Make sure the BTW is turned off. Then press and hold the button for 5 seconds. Status Indicator Mode Indicator Unpaired (wait for pairing) Blinks blue 3 times, then flashes blue and green alternately (If not connected within two minutes, the unit will enter standby mode.) Standby Mode Slow flashing green light Power OFF Green light blinks 3 times Paired Successfully Slow flashing blue light Low Battery Voice prompts "Low Battery" every two minutes Charging Solid green light Fully Charged Light up blue for 2s, then flashes green slowly 3.5mm Headphone Jack Connect the supplied single earbud for audio monitoring. Built-in Microphone USB Type-C Charging Port Belt Clip (Detachable) Magnetic Clip 03 Accessory Setup Guide 04 Operation Guide 1. Press and hold the power button for 2 seconds to turn on the BTW. 2. Pairing. Saramonic BTW First time pairing: æThe BTW will enter pairing mode automatically after power on. The indicator flashes blue and green alternately. çTurn on Bluetooth, then select "Saramonic BTW" on your device. èWhen connected successfully, the indicator flashes blue slowly. Automatic connection: Turn on the Bluetooth of the last device connected, and then turn on the BTW, the connection between the device and the BTW with will be automatically established. 3. Open a third-party audio or video app and start recording. For better recording experience, the application SmartRecorder is recommended. Please scan the following QR code to download and install SmartRecorder. SmartRecorder 05 Specifications Transmission Type Modulation Operating Range RF Output Power Polar Pattern Maximum SPL Sensitivity Power Requirement Charging Port Battery Life Antenna Audio Connector Dimensions Weight Operating Temperature Storage Temperature 2.4GHz wireless transmission GFSK 80m (line-of-sight) <10dBm Omnidirectional 120dB SPL -42dB Built-in Li-ion Battery USB Type-C 10 hours Built-in Antenna 3.5mm headphone jack (stereo output) (also support TRRS microphone input) 67.6×42.6×18.4mm 24.5g 0°C to 50°C 20°C to 55°C Packing List 1×BTW Wireless Lavalier Microphone 1×USB-A to USB-C Charging Cable 1×Single Earbud 1×Fur Windshield 1×Belt Clip 06 : info@saramonic.com 1. 2. 3. 4. 5. BTW APP/ BTW80m 07 08 / 2 3 () 5 3 3 low battery 2 3.5mm Type-C 09 10 1. 2 2. BTW "Saramonic BTW" Saramonic BTW BTW2 BTWBTW 3.BTWAPP SmartRecorder SmartRecorder SmartRecorder 11 2.4GHz 80 <10dBm 120dB SPL -42dB USB Type-C 10 3.5mm TRRS 67.6×42.6×18.4mm 24.5g 0°C ~ 50°C 20°C ~ 55°C BTW×1 USB-C×1 ×1 ×1 ×1 12 SmartRecorder For better mobile recording experience, the application SmartRecorder is recommended. Saramonic SmartRecorder Scan the QR code and follow us Shenzhen Jiayz Photo Industrial., Ltd A16 Building, Intelligent Terminal Industrial Park of Silicon Valley Power, Guanlan, Longhua District, Shenzhen, China A16 400-613-1096 www.saramonic.com info@saramonic.com