Quick Guide
Operating the product
Read "Safety Instructions" section first!
Product Overview and Controls
The dishwasher features several keys and indicators for operation:
- 1. On / Off Key
- 2. Remote Control function
- 3. Menu Key
- 4. Time Delay Selection / Menu Direction Selection Keys
- 5. Selection / Confirmation Key
- 6. Display: Shows program status and information.
- 7. Start / Pause / Cancel Key
- 8. Function Selection Keys: Includes F1 TrayWash, F2 Fast+, F3 SteamGloss, F4 Super Rinse, F5 Half Load.
- 9. Programme Selection Keys
Indicators include:
- 10. Tablet Detergent Indicator (model dependent)
- 11. Liquid Detergent Dosing Indicator (model dependent)
- 12. Auto Door Open Indicator (model dependent)
- 13. Filter Cleaning Function Indicator (model dependent)
- 14. IonGuard Function Indicator (model dependent)
- 15. Delay Time / Programme Time Indicator
- 16. Delayed Start Indicator
- 17. End of Programme Indicator
- 18. Rinse Aid Indicator
- 19. Salt Indicator
- 20. Water Cut-off Indicator
- 21. Sound Settings Menu Indicator
- 22. Water Hardness Settings Menu Indicator
- 23. HomeWhiz Indicator
- 24. HomeWhiz Setting Indicator
Program Data and Average Consumption Values
The following table details various wash programs, their cleaning temperatures, degree of soiling suitability, duration, water usage, and energy consumption.
| Programme Name | Cleaning Temperature | Degree of Soiling | Duration (min) | Water (l) | Energy (kWh) |
|---|---|---|---|---|---|
| Auto | 40-65 °C | Determines soiling and adjusts automatically. Suitable for all dishes. | 110-173/140-203 | 9,4-12,4 | 0,90-1,45 |
| Aqua Flex | 70 °C | For daily mixed dishes including plastics. Delicate glass in upper basket, pans in lower. | 202/211 | 19,0 | 1,53 |
| Intensive | 60 °C | Suitable for heavily soiled dishes, pots and pans. | 170/197 | 16,8 | 1,51 |
| Eco * | 50 °C | For normally soiled dishes. Most efficient in power and water consumption. EU eco-design directive reference. | 279/284 | 9,9 | 0,861 |
| GlassCare | 40 °C | Special program for gentle cleaning of delicate glassware. | 120/127 | 13,6 | 1,2 |
| Quick&Shine (#) | 60 °C | Daily washing for normally soiled dishes, fastest way. | 58/81 | 10,6 | 1,18 |
| Mini (#) | 35 °C | Suitable for lightly soiled daily dishes that are scraped or pre-cleaned. | 30/53 | 10,8 | 0,8 |
| Prewash | For removing remnants on soiled dishes kept waiting, preventing bad odour. | 15 | 4 | - | |
| Downloadable Program | Check HomeWhiz app for downloadable programs. | - | - | - |
* Reference programme for testing institutes. Values determined under standard conditions. (#) Additional functions may cause changes in programme durations.
Loading Capacity: 15
Downloadable Program Information and Average Consumption Values
| Programme Name | Cleaning Temperature | Degree of Soiling | Duration (min) | Water (l) | Energy (kWh) |
|---|---|---|---|---|---|
| Baby Protect | 70 °C | Suitable for dishes requiring extra hygiene, such as baby articles. Also for heavily soiled dishes. | 160/194 | 18,0 | 1,8 |
| Clean&Shine | 65 °C | Daily washing program for normally soiled dishes. | 116/125 | 14,4 | 1,35 |
| SilentWash | Daily washing program for normally soiled dishes in the most silent way. | 275/298 | 9,6 | 1,15 | |
| InnerClean | Recommended every 1-2 months for machine cleaning and hygiene. Operate while machine is empty. Use with special machine cleaner for efficient results. | 90/105 | 15,2 | 0,7 |
HomeWhiz Function
The HomeWhiz function allows you to check your dishwasher and monitor its status via your smart device.
- HomeWhiz operates on a 2.4GHz frequency band.
- You can monitor your machine through the application even when the function is not selected.
- The HomeWhiz indicator shows if the function is enabled or not. If disabled, it will be off or flash at short intervals (e.g., wireless connection off, door open).
- The function disables if the dishwasher door is open or during On/Off operations. It can be re-enabled with the remote control key.
The display when HomeWhiz is enabled shows a specific icon.
HomeWhiz Setup and User Account Settings
To use the HomeWhiz function:
- Install the HomeWhiz application from your smart device's app store.
- Ensure your smart device is connected to the internet.
- Complete the registration process with your email address in the application.
- Use the "Add/Remove Appliance" section to pair your dishwasher with your account.
Initial Setup:
- Tap "Add/Remove Appliance" in the HomeWhiz app.
- Tap "Tap here to setup a new appliance".
- When the machine is off, press the On/Off key and Remote Control key simultaneously to enter the settings menu. Select "wireless connection setup".
- On your smart device's settings, connect to the "HomeWhiz xxx-xxxx" network (password available in the app).
- Connect your smart device to the HomeWhiz network and return to the app. Tap Next to proceed.
- Select your Wi-Fi network and enter the password.
- The HomeWhiz icon (Wi-Fi symbol) will flash during connection and become solid once established.
- Ensure your smart device is on the same network for initial connection.
- Name your dishwasher in the app.
- Upon successful setup, the product returns to the main screen. If setup fails within 5 minutes, the HomeWhiz icon will turn off, and the product will switch off. Repeat setup from step 1 if necessary.
Using the dishwasher on more than one device
Install the HomeWhiz app on additional smart devices and log in with your existing account to use the dishwasher.
Setting up dishwasher through a new account:
- Create a new account and log into the HomeWhiz app. Ensure your smart device and dishwasher are on the same network.
- Tap "Add/Remove Appliance" on the Products page.
- Tap (+) next to the dishwasher to add it and give it a name.
- A request will be sent to the owner via email. Joint use is possible after owner confirmation.
Your smart device and dishwasher do not need to be on the same network after initial setup, as long as your smart device is connected to the internet.
HomeWhiz On/Off
Press the remote control key to enable or disable the HomeWhiz function. When disabled, the indicator returns to the delay/programme time display.
Changing the Downloaded Program
You can change the Downloaded Programme via the HomeWhiz application. Refer to the "Table of Program Data and Average Consumption Values" for program details.
To change the Downloaded Program:
- Connect to your product via the HomeWhiz application.
- Turn on the Remote Control function.
- Navigate to the product's settings page in the app.
- Go to the "Download Program" page.
- Select a program to download.
- Press "Download Program" in the app. An animation will show the download progress.
- Once complete, select and install the downloaded program on the product or via the app.
You can download multiple programs. If you download a new program, the previous selection will be cancelled.
Adjusting the Water Softening System
Proper adjustment of the water softening system improves washing, rinsing, and drying performance.
To adjust the system:
- Unpack the test strip.
- Let tap water flow for approximately 1 minute.
- Dip the test strip into the water for 1 second.
- Take out the strip, shake it, and wait for 1 minute.
- Compare the strip to the indicators to determine the water hardness level (Level 0 to Level 5).
- Make the necessary adjustment based on the test strip result.
After detecting the water hardness:
- Switch on the machine and press and hold the Menu key for 3 seconds (some models may require a single press).
- Use the "<" and ">" keys to navigate until the water hardness setting indicator shows "r".
- Use the Selection key to adjust the water hardness level according to your water supply. Refer to the "Water hardness level setting table" for correct settings.
- Press the On/Off key to save the setting.
Water hardness level adjustment table
| Hardness Level | English Water Hardness °dE | German Water Hardness °dH | French* Water Hardness °dF | Water Hardness Level Indicator |
|---|---|---|---|---|
| Level 0 | 0-5 | 0-4 | 0-8 | |
| Level 1 | 6-9 | 5-7 | 9-13 | Press the Selection key to switch the water hardness level to position 1. (r1) |
| Level 2 | 10-15 | 8-12 | 14-22 | Press the Selection key to switch the water hardness level to position 2. (r2) |
| Level 3 | 16-19 | 13-15 | 23-27 | Press the Selection key to switch the water hardness level to position 3. (r3) |
| Level 4 | 20-24 | 16-19 | 28-34 | Press the Selection key to switch the water hardness level to position 4. (r4) |
| Level 5 | 25-62 | 20-50 | 35-90 | Press the Selection key to switch the water hardness level to position 5. (r5) |
If water hardness is above 50°dH or if using well water, use a filter and water purification devices.
Your machine has an Automatic Water Hardness Detection System. Add salt when the Salt Indicator light is on for this system to function correctly.
Even with the Automatic Water Hardness Detection System, initial water hardness setting is done by authorized service or user. Upon moving, the dishwasher will automatically adjust to the new water hardness level.
HomeWhiz Troubleshooting
Follow these steps if you encounter control or connection problems:
- Check if your smart device is connected to the internet.
- Close and restart the HomeWhiz application.
- Restart your smart device.
- Check the dishwasher's wireless connection status. If "WLAN: Off", switch to "WLAN: On" and wait for connection. Then close and restart the HomeWhiz app.
- If connection fails, repeat the initial setup steps.
- If problems persist, contact authorized service.
