Philips S1000 Series AquaTouch Shaver

Included Accessories

The accessories supplied may vary for different products. The box shows the accessories that have been supplied with your appliance.

Getting Started

Charging the Shaver:

1. Connect the power cord to the shaver.
2. Plug the power adapter into an electrical outlet.
3. The charging indicator will light up. A full charge takes approximately 8 hours, providing up to 40 minutes of cordless shaving.

Shaving:

1. Ensure the shaver is charged.
2. Hold the shaver against your skin and move it gently in circular motions.
3. For a close shave, stretch the skin with your free hand and move the shaver against the direction of hair growth.
4. The shaver can be used wet or dry. For a wet shave, use with shaving foam or gel.

Cleaning and Maintenance

Cleaning the Shaver:

1. Rinse the shaver head under running water.
2. For a thorough clean, open the shaving heads and rinse them under running water.
3. Allow the shaver to air dry completely before reassembling.
4. The shaver is waterproof and can be cleaned under the tap.

Replacing the Shaving Heads:

1. Press the release button to open the shaving head.
2. Remove the old shaving heads by pulling them upwards.
3. Insert the new shaving heads (SH30) by pressing them down until they click into place.
4. Close the shaving head.
5. Replace the shaving heads every 24 months for optimal performance.

Support

For further assistance, visit the Philips support website at www.philips.com/support or register your product at www.philips.com/register.

Product Information

• Model Series: S1000
• Shaving Head Replacement: SH30
• Replacement Cycle: 24 months
• Power: Rechargeable battery
• Usage: Wet & Dry