InoKraft MaXpray Sprayer: Troubleshooting and Instructions

Getting Started and Safety

Before operating your InoKraft MaXpray sprayer, ensure you are familiar with the necessary safety precautions. This includes wearing appropriate protective gear such as safety goggles, earmuffs, a spray mask or respirator, and gloves, as recommended by the fluid and solvent manufacturer.

Spray Tip Selection

Choosing the correct spray tip is crucial for achieving optimal results. The sprayer comes with a 515 Spray Tip suitable for most paints on large surfaces like walls and ceilings. For different materials or desired spray fan widths, consult the spray tip chart. Key considerations include:

• Material Viscosity: Thicker materials require larger spray tip sizes.
• Fan Width: Narrower fans are for smaller projects, while wider fans are for larger areas.
• Sprayer Compatibility: Ensure your sprayer model supports the selected spray tip size.

Remember that spray tips wear over time, leading to increased hole size. Periodic replacement is necessary to maintain consistent spray patterns and prevent clogs. For additional spray tip sizes and accessories, visit authorized distributors like amazon.com.

Troubleshooting Common Issues

This guide addresses common problems encountered with the InoKraft MaXpray sprayer. Always follow the pressure relief procedure before any checks or repairs. If a solution doesn't work, proceed to the next step.

Common Problems Addressed:

1. Why isn't my sprayer running?
2. Sprayer not priming or losing prime.
3. Poor spray pattern or paint dribbling.
4. Sprayer suddenly stops during use.
5. Sprayer is leaking.
6. Paint running down the wall or sagging.
7. Inadequate paint coverage.
8. Inconsistent fan pattern.
9. Motor overheating and shutting off intermittently.

For detailed solutions to each problem, refer to the specific sections within this guide.

Support and Community

The InoKraft Support Team is available to assist with any issues. Contact them via email at support@inokraft.com. Join the InoKraft Community by emailing "I'm a kraftsman" to support@inokraft.com to receive extended warranty and free trials of new products and accessories.