Installation Step Diagram
Parts
- Part A: Seat/Backrest Assembly (1 piece) - A chair seat with a tufted, pleated velvet backrest.
- Part B: Base/Pedestal (1 piece) - A circular metal base with a central column and a U-shaped footrest.
- Part C: Gas Lift Cylinder (1 piece) - A telescopic gas lift cylinder.
- Part D: Base Plate (1 piece) - A flat, circular metal base plate.
- Part E: Screws (4 pieces) - Labeled M6x16mm.
- Part F: Allen Wrench (1 piece) - An L-shaped hexagonal wrench.
Instructions
Step 1
Insert the gas lift cylinder (C) into the center hole of the base plate (D). An arrow indicates downward insertion. ⚠️ Warning: The black cap on the top of the gas lift must be removed before assembly.
Step 2
Attach the base/pedestal assembly (B) to the underside of the seat assembly (A) using four screws (E) and the Allen wrench (F).
Step 3
Lower the assembled seat (A+B) onto the gas lift cylinder (C), which is already attached to the base plate (D). An arrow indicates downward placement.
