Powering Trusted Identities of the World’s People, Places and Things | HID Global
Corporate Offices | HID GlobalNeed Support? | Support
P65warnings.ca.gov
User Guide for HID Global models including: X001800002, JQ6X001800002, FARGO DTCii Plus Power
HID Global Corporation X001800002 Direct-to-Card Printer JQ6-X001800002 JQ6X001800002 x001800002
File Info : application/pdf, 14 Pages, 244.72KB
DocumentDocumentFARGO® DTC®ii Plus User Guide PLT-05151, A.0.R August 2020 Powering Trusted Identities Powering Trusted Identities FARGO® DTC®ii Plus User Guide Copyright © 2020 HID Global Corporation/ASSA ABLOY AB. All rights reserved. This document may not be reproduced, disseminated or republished in any form without the prior written permission of HID Global Corporation. Trademarks HID GLOBAL, HID, the HID Brick logo, DTC, FARGO and iCLASS are trademarks or registered trademarks of HID Global, ASSA ABLOY AB, or its affiliate(s) in the US and other countries and may not be used without permission. All other trademarks, service marks, and product or service names are trademarks or registered trademarks of their respective owners. MIFARE is a registered trademarks of NXP B.V. and are used under license. Contacts For additional offices around the world, see www.hidglobal.com/contact/corporate-offices. Americas and Corporate 611 Center Ridge Drive Austin, TX 78753 USA Phone: +1 866 607 7339 Europe, Middle East and Africa (EMEA) 3 Cae Gwyrdd Green Meadow Springs Cardiff CF15 7AB United Kingdom Phone: +44 (0) 2920 528 500 Asia Pacific 19/F 625 King's Road North Point, Island East Hong Kong Phone: +852 3160 9833 Brazil Condomínio Business Center Av. Ermano Marchetti, 1435 Galpão A2 CEP 05038-001 Lapa - São Paulo / SP Brazil Phone: +55 11 5514-7100 HID Global Technical Support: www.hidglobal.com/support. What's new Date August 2020 Description Initial release. A complete list of revisions is available in Revision history. Revision A.0.R PLT-05151, A.0.R 2 August 2020 Section 01 Specifications Powering Trusted Identities Powering Trusted Identities FARGO® DTC®ii Plus User Guide 1.1 Introduction The purpose of this section is to provide you with specific information on the Regulatory Compliances, Agency Listings, Technical Specifications and Functional Specifications for the DTC®ii Plus card printer. 1.2 Regulatory compliance UL The card printer is listed under UL 60950-1 (2nd edition) Information Technology Equipment File Number: E145118 This product is intended to be supplied by a Listed Power Unit marked Class 2 and rated for 24Vdc, 3.3Aminimum. CSA The printer manufacturer has been authorized by UL to represent the card printer as CSA Certified under CSA Standard C22.2 No. 60950-1-07 2nd edition File Number: E145118 1.2.1 Agency listings Emissions and Immunity Standards Safety Standards FCC Part 15 Class A, RSS-GEN, RSS 210 UL IEC 60950-1 (2nd edition), CSA C22.2 No. 60950-1-07 (2nd edition) PLT-05151, A.0.R 12 August 2020 Powering Trusted Identities FARGO® DTC®ii Plus User Guide 1.2.2 United States This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference; in which case, you are required to correct the interference at your expense. CAUTION: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. Warning: This product can expose you to chemicals including Diisononyl Phthalate (DINP), which is a known to the State of California to cause cancer. For more information go to www.P65warnings.ca.gov. 1.2.3 Canada This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. PLT-05151, A.0.R 12 August 2020 Powering Trusted Identities FARGO® DTC®ii Plus User Guide 1.3 Safety messages 1.3.1 Safety messages - United States Symbol Danger: Critical instructions for safety purposes Failure to follow these guidelines results in personal injury or death. To prevent personalinjury or death: Reference the following safety messages before performing an operation. Always remove the power cord prior to performing repair procedures, unless otherwise specified. Ensure only qualified personnel perform these procedures. ESD: This device is electrostatically sensitive. You may damage the device if exposing it to static electricity discharges. To prevent damage: Reference the following safety messages before performing an operation. Observe all established Electrostatic Discharge (ESD) procedures while handling cables in or near the circuit board and printhead assemblies. Always wear an appropriate personal grounding device. Always remove the ribbon and cards from the printer before making any repairs, unless otherwise specified. Remove jewelry and thoroughly clean hands before working on the printer. Caution: This symbol warns of an electrical hazard that could result in personal injury or death. Caution: For safety purposes, do not use Ethernet for a direct connection outside of the building. PLT-05151, A.0.R 12 August 2020 Powering Trusted Identities FARGO® DTC®ii Plus User Guide 1.3.2 Safety messages - French Symbole Danger: ESD: Instructions critiques visant la Sécurité Si ces directives ne sont pas suivies les résultats peuvent être des lésions corporelles ou la mort. Pour éviter des lésions corporelles ou la mort: Rapportez-vous aux avis suivants de sécurité avant de procéder à une opération. Retirez toujours le câble d'alimentation avant d'effectuer des procédures de réparation, sauf spécification contraire. Assurez-vous qu'uniquement des personnes qualifiées réalisent des procédures. Ce dispositif est sensible à l'électricité statique. Il peut souffrir des dommages s'il est exposé à des décharges électrostatiques. Pour éviter des dommages: Rapportez-vous aux messages suivants avant de procéder à une opération. Suivez toutes les procédures de Décharges Electrostatiques (ESD) en vigueur durant le maniement des câbles dans ou à proximité des Ensembles de Cartes de Circuit Imprimé et Tête d'Impression. Portez toujours un dispositif de mise à la terre personnelle appropriée. Retirez toujours le ruban et les Cartes de l'Imprimante avant d'effectuer toute réparation, sauf spécification contraire. Retirez tous bijoux et lavez soigneusement vos mains avant de travailler à l'Imprimante. Attention: Ce symbole est un avis de péril électrique passible de résulter en lésion corporelle ou mort. Attention: Pour des motifs de sécurité, n'utilisez pas Ethernet pour une connexion directe hors du bâtiment. PLT-05151, A.0.R 12 August 2020 Powering Trusted Identities FARGO® DTC®ii Plus User Guide 1.4 Technical specifications Term Print Method Print resolution Colors Print Ribbon Options Function Dye Sublimation / Resin Thermal Transfer 300 dpi (11.8 dots/mm); continuous tone Up to 16.7 million colors / 256 shades per pixel Full-color with resin black and overlay panel, YMCKO* (500 prints) Full-color half-panel with resin black and overlay panel, YMCKO* (850 prints) Full-color with two resin black panels and overlay panel, YMCKOK* (500 prints) Full-color with fluorescing, resin black panel and overlay panel, YMCFKO* (500 prints) Full-color with fluorescing, two resin black panels and overlay panel, YMCFKOK* (400 prints) Full-color half-panel with two resin black and overlay panel, YMCKOK* (500 prints) Full-color half-panel with two resin black and two overlay panels, YMCKOK* (500 prints) Resin black and overlay panel, KO* (1250 prints) Dye-sublimation black and overlay print, BO* (1250 prints) Resin black (standard and premium) (3000 prints) Resin green, blue, red, white (1000 prints) Resin silver (2000 prints) Resin gold (1000 prints) Rewrite technology No ribbon is required * Indicates the ribbon type and the number of ribbon panels printed where Y=Yellow, M=Magenta, C=Cyan, K=Resin Black, O=Overlay, F=Fluorescing Resin Print Speed 8 seconds per card (KO*) 24 seconds per card (YMCKOK*) Print speed indicates an approximate batch print speed and is measured from the time a card feeds into the printer to the time it ejects from the printer. Print speeds do not include encoding time or the time needed for the PC to process the image. Process time is dependent on the size of the file, the CPU, amount of RAM and the amount of available resources at the time of the print. * Indicates the ribbon type and the number of ribbon panels printed where Y=Yellow, M=Magenta, C=Cyan, K=Resin Black, O=Overlay, F=Fluorescing Resin Card Size and Types CR-80 (3.375" L x 2.125" W / 85.6mm L x 54mm W) Supported Accepted Standard Card Sizes CR-80 edge-to-edge (3.36" L x 2.11" W / 85.3mm L x 53.7mm W) Accepted Card Thickness .009" - .040" / 9 mil 40 mil/.229mm 1.016mm Accepted Card Types Press polished PVC Laminated PVC (credit cardconstruction) Blank white chip/mag Dual interface MC and/orVisa Input Hopper Card Capacity 200 cards (.030"/.762 mm) PLT-05151, A.0.R 12 August 2020 Powering Trusted Identities FARGO® DTC®ii Plus User Guide Term Output Hopper Card Capacity Reject Hopper Card Capacity Card Cleaning Printer Memory Operating Systems Interface Operating Temperature Humidity Dimensions Weight Supply Voltage Supply Frequency Warranty Encoding Options Supported Function 100 cards (.030"/.762.mm) 100 cards (.030"/.762.mm) Card cleaning roller integrated into the ribbon cartridge. A new cleaning roller is included with each ribbon cartridge. 32MB RAM Windows Server 2003 Windows Server 2008 Windows Server 2016 Windows Server 2019 Windows 7 (32- and 64 bit) Windows 10 (32- and 64-bit) Ethernet with internal print server 65° F to 90° F / 18° C to 32°C 20-80% non-condensing 9.8"H x 22.9"W x 9.2"D/249mm H x 583mm W x 234mm D 13 lbs./6 kg 100-240 VAC, 1.6 A 50 Hz/60 Hz Printer Three years; Printhead Three years, unlimited pass with UltraCardTM 13.56 MHz (iCLASS®, MIFARE, ISO 14443 A/B, ISO 15693) read/write encoder Contact Smart Card Encoder reads from and writes to all ISO7816 1/2/3/4 memory and microprocessor smart cards (T=0, T=1) as well as synchronous cards ISO Magnetic Stripe Encoding, dual high- and low-coercivity, Tracks 1, 2 and 3 Display Graphical Display 1.5 Functional specifications This card printer utilizes two different, yet closely related printing technologies to achieve its remarkable direct-to-card print quality for dye-sublimation and resin thermal transfer. 1.6 Printer components: print ribbons The card printer utilizes both dye-sublimation and/or resin thermal transfer methods to print images directly onto blank cards. Since the dye-sublimation and the resin thermal transfer print methods each provide their own unique benefits, print ribbons are available in resin-only, dye-sublimation-only and combination dye-sublimation/resin versions. To make it easier to identify the print ribbons, a letter code has been developed to indicate the type of ribbon panels found on each ribbon: = Dye-Sublimation Yellow Panel PLT-05151, A.0.R 12 August 2020 Powering Trusted Identities = Dye-Sublimation Magenta Panel = Dye-Sublimation Cyan Panel = Resin Black Panel (Premium unless otherwise stated) = Clear Protective Overlay Panel = Fluorescing Panel FARGO® DTC®ii Plus User Guide PLT-05151, A.0.R 12 August 2020 Powering Trusted Identities 1.6.1 Ribbon types and print counts Ribbon YMCKO Full Color/Resin Black / Overlay YMCKO Half Panel Full Color (1/2) / Resin Black/Overlay YMCFKO - Full Color/UV Fluorescing / Resin Black / Overlay YMCKK - Full Color / 2 Resin Black YMCKOK - Full Color / 2 Resin Black / Overlay YMCFKOK - Full Color/UV Fluorescing / 2 Resin Black / Overlay YMCKOK Half Panel-Full Color (1/2) / 2 Resin Black / Overlay YMCKOKO Half Panel-Full Color (1/2) / 2 Resin Black / 2 Overlay K Standard Resin K Premium Resin Colored Resin KO - Premium Black Resin / Overlay BO - Dye-Sub Black / Overlay SOK - Silver Metallic Resin / Overlay / Resin Black None Rewritable FARGO® DTC®ii Plus User Guide DTCii N/A N/A N/A N/A 200 N/A N/A N/A N/A N/A N/A 1250 N/A 350 Supported PLT-05151, A.0.R 12 August 2020 Powering Trusted Identities FARGO® DTC®ii Plus User Guide 1.7 Printer components: blank cards Type Card Size Card Surface Description The card printer accepts standard CR-80 sized cards. Suitable cards must have a polished PVC surface free of fingerprints, dust or any other types of embedded contaminants. In addition, cards must have a completely smooth, level surface in order for the printer to achieve consistent color coverage. Certain types of Proximity cards have an uneven surface that will inhibit consistent color transfer. Certain types of smart card chips are raised slightly above the cards surface which also results in poor color transfer. UltraCard Brand Cards The UltraCard product line, available exclusively as part of HID Global FARGO brand secure card issuance solutions, has a long standing reputation among dealers and end-Users for consistent quality in construction. In addition to blank stock, the UltraCard line is available in a variety of configurations for magnetic stripe, custom holograms and other additional anti- counterfeiting feature UltraCard Premium is the preferred card for Direct-to-Card (DTC) applications that require a higher quality card. The UltraCard Premium's composite material construction provides for maximum durability, flexibility and card life, with optimal resolution print quality for lamination and fluorescent panel ribbon printing applications. UltraCard PVC cards are medium-durability cards for a glossy, photo quality finish. These cards are manufactured to ensure clean, scratch-free cards for high-quality prints and extended printhead life. PLT-05151, A.0.R 12 August 2020 Powering Trusted Identities Revision history Date August 2020 Description Initial release. FARGO® DTC®ii Plus User Guide Revision A.0.R PLT-05151, A.0.R 13 August 2020 Powering Trusted Identities Americas & Corporate 611 Center Ridge Drive Austin,TX 78758 USA Support: 866-607-7339 Asia Pacific 19/F 625 King'sRoad North Point Island East Hong Kong Support: 852-3160-9833 Europe, Middle East & Africa 3 Cae Gwyrdd Green Meadow Springs Cardiff, CF15 7AB United Kingdom Support: +44 (0) 2920 528 500 PLT-05151, A.0.R Brazil Condomínio Business Center Av. Ermano Marchetti, 1435 Galpão A2 - CEP05038-001 Lapa - São Paulo / SP, Brazil Phone: +55 115514-7100 hidglobal.com An ASSA ABLOY Group brand