Instructions for Villa Pergola models including: HC-PM03 D-T1 Remote Control With Light Control Rain Sensor, HC-PM03 D-T1, Remote Control With Light Control Rain Sensor, Light Control Rain Sensor, Rain Sensor

HC-PM03-D PR04 灯控遥控器说明书 EN

Rain Sensor Instruction

Villa Pergola Instructions

Download instructions

Rain Sensor - Villa Pergola

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 1 Pages, 569.13KB

Document Document

Operating Instructions for Remote Control and rain sensor

 





Motor: Up button

Motor: Stop button

Motor: Down button

Light bulb: turn on/off button

HC-PM03\D-T1 Remote control

1. Function and Features

 86mm*86mm, in accordance with international installation standard;



The electric structure is partial conformity with the standard fire protection requirement of the electrician;



Industrial grade microcomputer chip is used to improve product quality and reliability greatly;

 Use shock-proof current relay;



Components using precision SMT industry, surface moisture-proof treatment;

 Power supply has safety protection, power supply time is 5 minutes;

 It is used with various emiters and tubular motors.

The key code/ indicator light

HC-PR04 Rain sensor

2. Product Parameters

Product name Remote control with light control

Product model
Receiving/transmitting frequency
Working temperature

HC-PM03\D-T1 433.92MHz -20~+85

Receiving sensitivity
Allowed number of transmitters

-110dBm 8pcs

1. Function and Features
Exquisite appearance design Anti - ultraviolet radiation shell, suitable for outdoor use The rain-sensitive surface is designed at 45 degrees to facilitate the induction plate to keep dry The induction plate adopts gold sinking process and has strong oxidation resistance
Sensitive to rain
Two installation methods, free choice

Product name Rain sensor

Product model
Receiving/transmitting frequency
Working voltage

HC-PR04 433.92MHz DC5V-24V

Working temperature -20~+85

3. Operating Instruction

5 seconds
Power on the motor
Open the back cover of the remote control and press and hold the code key for more than 5 seconds with a fine needle.

When the motor keeps beeping "dididi"

Enter the state of learning code
Press and hold the code key for rain sensor more than 3 seconds with a fine needle. Learning code is successful.