User Manual for AURA TEC models including: Purebble II MIcrobubble Shower, Purebble II, MIcrobubble Shower, Shower

004 1

purebble.com

(M/DG surface: glossy chrome finish) 0.035Mpa - ピュアブル

7 Baking soda Water Jet panel O-ring Shallow plate Toothbrush ①You will need above items for cleaning. *Remove O-ring from inside the jet panel before starting.

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 5 Pages, 1.10MB

Document Document

(M/DG surface : glossy chrome finish) 0.035Mpa

the plate for 2 to 3 hours. (Please refer to the cleaning method on page seven.)
If methods 1 and 2 do not work, Clean the holes in the jet panel using a toothpick or other tool that will not cause damage.

(Please refer to the cleaning method on page four.)

Cleaning with baking soda

Jet panel

Water

Baking soda

O-ring Shallow plate

Toothbrush
 You will need above items for cleaning. *Remove O-ring from inside the jet panel before starting.

 Pour water into the plate to soak the jet panel.

 Place the baking soda on the plate and spread it over the jet
panel using your fingers.

Leave the plate for 2 to 3 hours and then brush both sides of the
jet panel using a toothbrush to
clean the holes.

Rinse the jet panel well with water and replace the O-ring.

7