Owner's Manual for Hunter models including: 90646 Tripod Fan, 90646, Tripod Fan, Fan

61903-01 90437 90440 r20160415

Retro All-Metal 12 in. Oscillating Pedestal Fan with Tripod Stand Warranty

Hunter 90646 877697006512 0877697006512 1008176756

Retro All-Metal 12 in. Oscillating Pedestal Fan with Tripod Stand Use and Care Manual

Retro All-Metal 12 in. Oscillating Pedestal Fan with Tripod Stand Instructions / Assembly


File Info : application/pdf, 12 Pages, 975.11KB

PDF preview unavailable. Download the PDF instead.

a7a8d017-f166-496b-aa09-18fcb489a027
Tripod Fan
Owner's Manual

English

61811-01 R20220120

Model
90646

TABLE OF CONTENTS

Introduction ............................................................. 3

Safety and Warnings................................................ 3

Grounding............................................................... 5

Fused Plug ............................................................... 6

Unpacking............................................................... 7

Fan Assembly........................................................... 7

Operation................................................................ 8

Off / Speed Selection

8

Fan Tilt Adjustment

8

Maintenance............................................................ 9

Troubleshooting .......................................................10

Technical Support .....................................................10 Warranty .................................................................10

2

61811-01 R20220120

INTRODUCTION
Thank you for choosing the Hunter Tripod Fan. This manual gives you complete instructions for assembling and using your fan. Here are some of the features you will enjoy with your fan:
An attractive design that enhances any decor

Three speeds to adjust your comfort level All metal construction

SAFETY AND WARNINGS

READ AND SAVE THESE INSTRUCTIONS! To reduce

with any solid-state speed control device.

When using electrical appliances, basic precautions

should always be taken to reduce the risk

electric

shock and personal injury:

Read all instructions before using this fan.

1. Improper installation may result in the risk of electric shock or personal injury.

2. To prevent the risk of and electric shock, DO NOT use the unit near windows. Rain and moisture may create an electrical hazard.

3. The power plug must be removed from the power socket when not in use, before cleaning, servicing, maintenance and before moving to another location.

4. DO NOT put fan in a damp place or where humidity is high, such as a bathroom.

5. The fan should be placed on a avoid falling.

stable surface to

6. Use fan only for intended use, as described in this instruction manual.

7. To protect against electrical shock, DO NOT immerse any part of the unit in water or spray with liquids.

8. Close supervision is necessary when any appliance is used near children.

3

61811-01 R20220120

9. NEVER insert

pencils or any other objects

through the grill when the fan is running.

10. DO NOT operate any appliance with a damaged cord or plug, after the appliance malfunctions or has been dropped or damaged in any manner. Discard fan or return to an authorized service facility for examination and/or repair.

11. To disconnect, grip plug and pull from wall outlet. NEVER yank on cord.

12. ALWAYS use on a dry surface.

13. This product is intended for household use only and not for commercial or industrial use.

14. DO NOT operate fan in the presence of explosive

15. DO NOT place fan or any parts near an open cooking or any other heating appliances.
16. DO NOT use near curtains, plants, window treatments, etc.
17. This appliance has a grounded three-prong plug and is suitable for grounded receptacle use only. An adapter can be purchased separately for connecting three-blade grounding-type plugs to two-slot receptacles. The adapter must be properly grounded. DO NOT attempt to defeat the purpose of this safely feature.
18. Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances.
will not be tripped over.

WARNING
1. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or intellectual disabilities, and persons with lack of experience, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
2. Children should be supervised to ensure they do not play with the appliance.

4

61811-01 R20220120

GROUNDING
This appliance is for household use only and may be plugged into any 120-volt AC electrical outlet (ordinary household current). DO NOT use any other type of outlet.
WARNING
This unit is suitable for grounded receptacle use only.

Grounded Plug

Grounding Pin

Grounded Outlet Box Cover

The power cord has a grounded plug as shown in Figure 1, and must be used with an electrical outlet that can accommodate the grounding pin. If your electrical outlet cannot accommodate the grounding pin, then you must purchase an adapter as shown in Figure 2.
NOTE: The adapters ARE NOT supplied with this fan. Read, follow, and save the instructions that are included with the adapter you choose. The green grounding lug extending from the adapter must be connected to a permanent ground such as a property grounded outlet box. Do not use an adapter if your electrical outlet can accommodate the grounding pin.
LINE CORD SAFETY TIPS
1. NEVER pull or yank on the cord or the appliance.
2.
3. To disconnect the appliance, grasp the plug and remove it from the outlet.
4. Before each use, inspect the line cord for cuts and/ or abrasion marks. If any are found, the appliance should be serviced and the line cord replaced. Please return it to our Service Department or to an authorized service representative.
5. NEVER wrap the cord tightly around the appliance, as this could place undue stress on the cord where it enters the appliance and could cause it to fray and break.
6. DO NOT operate this appliance if the line cord shows any damage, if the appliance works intermittently or stops working en. tirely

Adapter
Grounding Means

Figure 1
Metal Screw Grounded Outlet Box Cover
Figure 2

5

61811-01 R20220120

FUSED PLUG
This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Discard product if the attachment plug is damaged. To reduce the
remove, replace, repair or tamper with the originally supplied plug. If the fan does not function properly, it may be due to the safety device incorporated in this plug.
If the fuse fails, it is generally due to a short circuit or circuit overload. Replace the fuse as per the instructions below (follow product marking for proper fuse rating) and check the product. If the replacement fuse fails, a short-circuit may be present and immediately unplug the unit and contact our technical support department for assistance.
Fuse Replacement:
Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord. Locate the door on top of the plug. Figure 3.
2. Slide the door on top of the plug towards the blades. Figure 4.
3. Carefully remove the fuse from the clips holding it on the top and bottom. RISK OF FIRE. Replace fuse only with 5 Amp, 125 Volt fuse. Figure 5.
Warning! Electrical Hazard! Only replace with a fuse type and rating matching what was removed from the product. If the product fails a second time, immediately unplug it and contact our technical support at 1-888-880-3267.
4. Gently push the fuse back into the pins that will hold it in place.
Note: If the fuse is not seated properly, the unit will not function.
5. Slide the door back over the fuse box in the plug.
6. Plug the fan back in and resume use.
RISK OF FIRE. Do not replace attachment plug. Contains a safety device (fuse) that should not be removed. Discard product if the attachment plug is damaged.
6

Figure 3 Figure 4 Figure 5
61811-01 R20220120

UNPACKING
As you unpack the fan, save the carton and packing materials in case you want to move or ship the unit in the future. Carefully remove all items from the box.
NOTE: It is best to have someone hold the box while you lift the fan and the protective packaging out of the carton. Make sure all shipping materials are removed from fan before operating.

FAN ASSEMBLY
Follow the steps below to attach the fan head to the tripod.
1. Fully extend the pre-install tripod legs, align the holes of the tripod bracket and the legs, install with three
position. (Figure 6)
2. Press the clip buttons in completely while sliding the pole from the bottom pole assembly into the pre-install tripod poles until the clip buttons appear through the hole in the pre-install tripod poles. Place

Fan Head

3. Turn the fan head perpendicular to the fan head
slot of the tripod adapter, making sure the hole on the fan head bracket align with the hole on the tripod adapter. Take the bolt and nut from the hardware bag, insert the bolt through the aligned holes and tighten with the nut to secure the fan head in position from the bottom of the tripod. (Figure 8)
4. Place the bolt cover from hardware bag onto the top of the tripod bracket. (Figure 9)

Fan Head Bracket

Figure 6
Figure 7
Bolt Nut
Figure 8
Bolt Cover

Figure 9

7

61811-01 R20220120

OPERATION
Off / Speed Selection
Turn the fan "ON" or "OFF" by rotating the power/speed knob at the back of the fan head. The power should always be OFF before unplugging the fan. To select the speed, turn speed control from OFF to the desired speed setting: 0 (off), 1 (low), 2 (medium), 3 (high). (Figure 10)
Fan Tilt Adjustment
tilt the fan head manually to the desired angle. (Figure 11)

01

23
Figure 10

Figure 11

8

61811-01 R20220120

MAINTENANCE
This fan is permanently lubricated and will not require additional lubrication (oil) for the life of the fan.
This fan requires little maintenance and contains no user serviceable parts. DO NOT try to x it yourself. Contact quali ed service personnel if servicing is needed.
Before cleaning, turn the fan off and unplug from electrical outlet. Wipe off excess dust with a lint-free cloth. To ensure adequate air circulation to the motor, keep vents located at the rear of the motor free from dust accumulation. A vacuum cleaner hose can be used to clean these vents.
DO NOT immerse the fan in water or any other liquid.
CLEANING THE FAN:
1. Turn the fan off and unplug from the electrical outlet.
2. Use a dry or slightly damp lint-free cloth to clean the fan.
Use a soft, slightly damp cloth to wipe the remaining fan parts.
DO NOT allow water or any other liquid to get into the motor housing or base.
DO NOT plug the fan into an electrical outlet until it has been fully reassembled.

9

61811-01 R20220120

TROUBLESHOOTING
1. Problem Cannot adjust the angle of the fan.
Solution Loosen the screws on the side of the fan head bracket. Adjust to the desired angle and tighten the screws.

TECHNICAL SUPPORT
If you need any assistance with setup, operation, or parts for your new Hunter Portable Fan, please call us. Our technical support staff is ready to help! We are open 24 hours, 7 days a week.
USA: 1-888-880-3267 (FANS) info@hunterhomecomfort.com
You may also reach us online at www.HunterHomeComfort.com.
An electronic copy of this user manual can also be obtained online at www.HunterHomeComfort.com.

WARRANTY
Hunter Home Comfort makes the following limited warranty to the user or consumer purchaser of this Hunter Portable Fan:

If your Hunter Portable Fan motor fails at any time within one year after the date of sale due to a defect in material or workmanship, labor to repair the defect will be provided free of charge at our Service Department in Kennesaw, Georgia. You will be responsible for labor costs after this one-year period. The foregoing limited warranty applies only to the motor itself, and does not apply to electronic controls such as remote controls, remote control receivers or transmitters used in conjunction with the motor. These electronic control items are included in the one year limited warranty below.

W

If any part of your Hunter Portable Fan other than the motor fails at any time within one year after the date of
10

61811-01 R20220120

sale due to a defect in material or workmanship, we will repair or, at our option, replace the defective part free of charge for parts and labor performed at our Service Department in Kennesaw, Georgia.

W

IF THE USER OR CONSUMER PURCHASER CEASES TO OWN THE FAN, THIS WARRANTY AND ANY IMPLIED WARRANTY WHICH THEN REMAINS IN EFFECT, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE VOIDED. NO WARRANTY, EXPRESSED OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS MADE IN RESPECT TO THE GLASS GLOBES OR LIGHT BULBS OR THE FINISH ON ANY METAL PORTION OF THE FAN. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES. THE DURATION OF ANY IMPLIED WARRANTY, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IN RESPECT TO ANY HUNTER FAN MOTOR OR OTHER FAN PART, IS EXPRESSLY LIMITED TO THE PERIOD OF THE EXPRESS WARRANTY SET FORTH ABOVE FOR SUCH MOTORS AND OTHER PARTS.

This warranty is voided if your Hunter Fan is not purchased and used in the contiguous United States.

This warranty excludes and does not cover defects, malfunctions or failures of any Hunter Portable fan which were caused by repairs by persons not authorized by us, use of parts or accessories not authorized by us, mishandling, improper installation, or damage to the Hunter Portable fan while in your possession, or unreasonable use, including failure to provide reasonable and necessary maintenance.

To obtain servicing, contact our Hunter Home Comfort Service Department, 980 Cobb Place Boulevard NW, Suite 100, Kennesaw, GA 30144. Please contact us before shipping your fan to us. If we authorize you to ship it to us, you will be responsible for all insurance and freight or other transportation charges to our factory service center. We will return your Hunter Fan freight prepaid. Your portable fan should be properly packed to avoid damage in transit since we will not be responsible for any such damage. Proof of purchase is required

11

61811-01 R20220120

when requesting warranty service. The purchaser must present sales receipt or other document that establishes proof of purchase.

W

IN NO EVENT SHALL HUNTER HOME COMFORT BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES.

SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

THE WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

980 Cobb Place Boulevard NW, Suite 100, Kennesaw, GA 30144
Hunter is a trademark of the Hunter Fan Company and is used under license to Hunter Home Comfort.
Printed in China 12

61811-01 R20220120



References

Acrobat Distiller 10.1.0 (Windows)