User Manual for SONIFEX models including: AVN-DIO12 Dual Mono Microphone Input To Dante, AVN-DIO12, Dual Mono Microphone Input To Dante, Mono Microphone Input To Dante, Microphone Input To Dante, Input To Dante
Sonifex AVN-DIO12 dubbele microfoon ingang naar Dante met mic gain | Triple Audio B.V. | Engineering & Broadcast
File Info : application/pdf, 5 Pages, 2.55MB
DocumentDocumentAVN-DIO12 Dual Mono Microphone Input to Dante® with Mic Gain Handbook Manufacturers of Audio Products for AV, Installed Sound, Broadcast Radio & Broadcast TV AVN-DIO12 Handbook Registration & Warranty For the latest Sonifex handbook information please visit the Sonifex website at www.sonifex.co.uk This handbook is for use with the following products: AVN-DIO12 Dual Microphone to Dante® with Mic Gain Artwork: AW11067 Stock Code: 30-392 © Sonifex Ltd, 2022 All Rights Reserved Revision 1.02, November 2023 Sonifex Ltd, 61, Station Road, Irthlingborough, Northants, NN9 5QE, England. Tel: +44 (0)1933 650 700 Fax: +44 (0)1933 650 726 Email: sales@sonifex.co.uk Website: https://www.sonifex.co.uk Information in this document is subject to change without notice and does not represent a commitment on the part of the vendor. Sonifex Ltd shall not be liable for any loss or damage whatsoever arising from the use of information or any error contained in this manual. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, information storage and retrieval systems, for any purpose other than the purchaser's personal use, without the express written permission of Sonifex Ltd. Unless otherwise noted, all names of companies, products and persons contained herein are part of a completely fictitious adaptation and are designed solely to document the use of Sonifex product. Made in the UK by Register Online for an Extended 2 Year Warranty Product: Serial No: www.sonifex.co.uk/register Product Warranty - 2 Year Extended As standard, Sonifex products are supplied with a 1 year back to base warranty. In order to register the date of purchase and so that we can keep you informed of any product design improvements or modificaons, it is important to complete the warranty registraon online. Addionally, if you register the product on the Sonifex website, you can increase your product warranty to 2 years. Go to the Sonifex website at: www.sonifex.co.uk/register to apply for your 2 year warranty. Sonifex Warranty & Liability Terms & Conditions 1. Definitions `the Company' means Sonifex Ltd and where relevant includes companies within the same group of companies as Sonifex Limited. `the Goods' means the goods or any part thereof supplied by the Company and where relevant includes: work carried out by the Company on items supplied by the Purchaser; services supplied by the Company; and soware supplied by the Company. `the Purchaser' means the person or organisaon who buys or has agreed to buy the Goods. `the Price' means the Price of the Goods and any other charges incurred by the Company in the supply of the Goods. `the Warranty Term' is the length of the product warranty which is usually 12 months from the date of despatch; except when the product has been registered at the Sonifex website when the Warranty Term is 24 months from the date of despatch. `the Contract' means the quotaon, these Condions of Sale and any other document incorporated in a contract between the Company and the Purchaser. This is the enre Contract between the pares relang to the subject maer hereof and may not be changed or terminated except in wring in accordance with the provisions of this Contract. A reference to the consent, acknowledgement, authority or agreement of the Company means in wring and only by a director of the Company. 2. Warranty a. The Company agrees to repair or (at its discreon) replace Goods which are found to be defecve (fair wear and tear excepted) and which are returned to the Company within the Warranty Term provided that each of the following are sasfied: i. noficaon of any defect is given to the Company immediately upon its becoming apparent to the Purchaser; ii. the Goods have only been operated under normal operang condions and have only been subject to normal use (and in parcular the Goods must have been correctly connected and must not have been subject to high voltage or to ionising radiaon and must not have been used contrary to the Company's technical recommendaons); iii. the Goods are returned to the Company's premises at the Purchaser's expense; iv. any Goods or parts of Goods replaced shall become the property of the Company; v. no work whatsoever (other than normal and proper maintenance) has been carried out to the Goods or any part of the Goods without the Company's prior wrien consent; vi. the defect has not arisen from a design made, furnished or specified by the Purchaser; vii. the Goods have been assembled or incorporated into other goods only in accordance with any instrucons issued by the Company; viii. the defect has not arisen from a design modified by the Purchaser; ix. the defect has not arisen from an item manufactured by a person other than the Company. In respect of any item manufactured by a person other than the Company, the Purchaser shall only be entled to the benefit of any warranty or guarantee provided by such manufacturer to the Company. b. In respect of computer soware supplied by the Company the Company does not warrant that the use of the soware will be uninterrupted or error free. c. The Company accepts liability: i. for death or personal injury to the extent that it results from the negligence of the Company, its employees (whilst in the course of their employment) or its agents (in the course of the agency); ii. for any breach by the Company of any statutory undertaking as to tle, quiet possession and freedom from encumbrance. AVN-DIO12 Handbook d. Subject to condions (a) and (c) from the me of despatch of the Goods from the Company's premises the Purchaser shall be responsible for any defect in the Goods or loss, damage, nuisance or interference whatsoever consequenal economic or otherwise or wastage of material resulng from or caused by or to the Goods. In parcular the Company shall not be liable for any loss of profits or other economic losses. The Company accordingly excludes all liability for the same. e. At the request and expense of the Purchaser the Company will test the Goods to ascertain performance levels and provide a report of the results of that test. The report will be accurate at the me of the test, to the best of the belief and knowledge of the Company, and the Company accepts no liability in respect of its accuracy beyond that set out in Condion (a). f. Subject to Condion (e) no representaon, condion, warranty or other term, express or implied (by statute or otherwise) is given by the Company that the Goods are of any parcular quality or standard or will enable the Purchaser to aain any parcular performance or result, or will be suitable for any parcular purpose or use under specific condions or will provide any parcular capacity, notwithstanding that the requirement for such performance, result or capacity or that such parcular purpose or condions may have been known (or ought to have been known) to the Company, its employees or agents. g. i. To the extent that the Company is held legally liable to the Purchaser for any single breach of contract, tort, representaon or other act or default, the Company's liability for the same shall not exceed the price of the Goods. ii. The restricon of liability in Condion (g)(i) shall not apply to any liability accepted by the Seller in Condion (c). h. Where the Goods are sold under a consumer transacon (as defined by the Consumer Transacons (Restricons on Statements) Order 1976) the statutory rights of the Purchaser are not affected by these Condions of Sale. Unpacking Your Product Each product is shipped in protecve packaging and should be inspected for damage before use. If there is any transit damage take pictures of the product packaging and nofy the carrier immediately with all the relevant details of the shipment. Packing materials should be kept for inspecon and also for if the product needs to be returned. The product is shipped with the following equipment so please check to ensure that you have all of the items below. If anything is missing, please contact the supplier of your equipment immediately. Item Product Unit Quanty 1 Conformity The products in this manual comply with the essenal requirements of the relevant European health, safety and environmental protecon legislaon. The technical jusficaon file for this product is available at Sonifex Ltd. The declaraon of conformity can be found at: hps://www.sonifex.co.uk/ declaraons WEEE Directive The Waste Electrical and Electronic Equipment (WEEE) Direcve was agreed on 13 February 2003, along with the related Direcve 2002/95/EC on Restricons of the use of certain Hazardous Substances in electrical and electronic equipment (RoHS). The Waste Electrical and Electronic Equipment Direcve (WEEE) aims to minimise the impacts of electrical and electronic equipment on the environment during their life mes and when they become waste. All products manufactured by Sonifex Ltd have the WEEE direcve label placed on the case. Sonifex Ltd will be happy to give you informaon about local organisaons that can reprocess the product when it reaches its "end of use", or alternavely all products that have reached "end of use" can be returned to Sonifex and will be reprocessed correctly free of charge. Atmosphere/Environment This apparatus should be installed in an area that is not subject to excessive temperature variaon (<0°C, >50°C), moisture, dust or vibraon. This apparatus shall not be exposed to dripping or splashing, and no objects filled with water, such as vases shall be placed on the apparatus. Repairs & Returns Please contact Sonifex or your supplier if you have any problems with your Sonifex product. Email technical.support@sonifex.co.uk for the repair/ upgrade/returns procedure, or for support & quesons regarding the product operaon. 2 3 AVN-DIO12 Handbook AVN-DIO12 Dual Microphone Input to Dante® with Mic Gain Converter Fig 1: AVN-DIO12 Front Panel Fig 2: AVN-DIO12 Rear Panel The AVN-DIO12 is a dual microphone input to Dante converter with adjustable mic gain in the Sonifex DIO range of Dante input/output devices. It features 2 balanced analogue XLR inputs and one Neutrik etherCON connector for direct connecon to a Dante AoIP network. Each mic can be routed via Dante Controller to any Dante receiver. It's powered using Power over Ethernet (PoE), using a Neutrik etherCON connector for power and data redundancy. The AVN-DIO12 uses the latest Audinate Dante chipset so is AES67 and Dante Domain Manager compliant. Gain Adjustment The AVN-DIO012 has coarse and fine mic gain for each microphone input. The coarse gain is set using the toggle switch, which provides 14dB/44dB of gain. The fine gain can be set using a trimmer adjustment tool, or small flat blade screwdriver, and adds between 0dB and 42dB of addional gain. High Pass Filter Each microphone input has an on/off toggle switch which turns the high pass filter on or off. When enabled, it acts on frequencies below 125Hz at a roll-off of 6dB/octave. Phantom Power Phantom power is enabled/disabled via a toggle switch on the front panel for each microphone input. When enabled, a 48V DC supply is provided to power an appropriate microphone. The red LED next to each input will illuminate to indicate phantom power is enabled. Audio Level LED To help you set the mic gain, a level LED is provided on the front panel for each microphone input to display the audio level being sent to the Dante network. The indicator thresholds are as follows: · Off: Level is under -38dBFS (-20dBu) · Green: Level is between -38dBFS (-20dBu) and -18dBFS (0dBu) · Amber: Level is between -18dBFS (0dBu) and -10dBFS (+8dBu) · Red: Level is above -10dBFS (+8dBu) Note: when using a phantom powered microphone, it may be necessary to earth the unit using the rear panel earth tag to eliminate mains hum. Setup First connect microphones to the mic inputs this will allow them to be transmied over the Dante network. Connect the device to a PoE enabled switch using an Ethernet cable, the device will automacally turn on. If the switch does not support PoE, a PoE injector can be used to provide power. By default the Dante IP address is obtained automacally, therefore the device will automacally appear in Dante Controller. If your device does not appear in Dante Controller please see the Network Troubleshoong secon of this manual. A computer on the same network can configure connecons between the DIO and other Dante enabled devices, using Dante Controller. Network Switch PC Running Dante Controller Network AVN-DIO Audio Analogue/Digital Legacy Equipment Fig 3: Typical AVN-DIO setup Link Link status is indicated using the top-le status LED. Once power has been supplied to the unit the link status LED turns red. The link status LED turns amber when a link is established with a link speed of 100 Mbps. Link acvity is indicated using the top-right status LED which blinks when incoming or outgoing data is sensed on the port. Fig 4: Power, Link, and Activity LEDs Dante Controller Once a link has been established Dante Controller can be used to configure the device. Dante Controller is an applicaon provided by Audinate and can be downloaded from their website. hps://www.audinate.com/ Within Dante Controller the unit should be visible within the Roung tab. Audinate® and Dante® are registered trademarks of Audinate Pty Ltd. Neutrik® and etherCON® are registered trademarks of Neutrik Ltd. Windows® is a registered trademark of Microso Corporaon Fig 5: Dante Controller - Routing tab 4 Network Troubleshooting If the device does not show up in Dante Controller please check that the Ethernet cable is correctly connected and that the device and computer are on the same network. If the computer and the device are on different IP subnets, the device will appear in Dante Controller with red text: AVN-DIO12 Handbook Fig 6: Red device name indicates network configuration error Opening the Device View for the device will provide details about the problem. Fig 9: Dante Controller - Network Config in Device View Fig 7: Error details In this example noce the device is on the 192.168.1.X subnet and the computer is on the 10.X.X.X subnet. To access the device, edit the computer's IP address. In Windows 10, type View Network Connecons into the search bar. Rightclick the network that the device is connected to and select Properes. Double click Internet Protocol Version 4 (TCP/IPv4) in the item list and edit the IP address. Fig 8: Windows IPv4 settings Save the changes made to the sengs then close and re-open Dante Controller. The device should now appear correctly. Note: if your computer has mulple network interfaces on the same physical network or IP subnet this can lead to unexpected results, in this case those interfaces can be disabled. To do this in Windows 10, type View Network Connecons into the search bar, right-click the network connecon to disable, and select Disable. In Dante Controller the device's configuraon should now be accessible. The device can now be configured and the network sengs can be modified so that the device is in the correct IP subnet. Open the Device View for the device and select the Network Config tab. Within this tab are opons to obtain an IP address automacally, or to configure an IP address manually. Aer configuring the devices IP address, click the Reboot buon, the device will restart and its IP address will be updated. Reconfigure the computers IP address to return to the prior IP subnet. For more troubleshoong informaon please see the official Dante FAQs at: hps://www.audinate.com/resources/faqs And Dante Controller User Guide at: hps://dev.audinate.com/GA/dante-controller/userguide/pdf/latest/ Routing Audio Audio can be routed seamlessly between each Dante enabled device on the network by creang connecons between the transmit channel of one device and the receive channel of another device. When a roung is inially created, an hour glass is displayed to show the connecon is being created. Aer a short me a green ck is displayed to indicate the connecon has been created successfully. Transmiers and receivers can also be filtered by typing a name into the corresponding filter field. Further filtering opons are available from the filter pane. Fig 10: Routed audio stream To remove a connecon simply click on the green ck. Transmit and receive channels in a diagonal can be quickly routed together by holding the control key (Ctrl) and clicking on the minimise/maximise buon on the roung grid. 5 AVN-DIO12 Handbook Device View Open up the Device View by double clicking on the device name in the roung grid. Status Within the Status tab, informaon about the device can be seen, such as the product type and the current IP address. Fig 11: Status tab Device Configuration Within the Device Config tab the following can be modified. Fig 12: Device Config tab · Device Name · Sample Rate · Encoding · Clocking · Device Latency An opon is also available to clear the configuraon, reseng all sengs to their default values. 6 Fig 1-4: AVN-DIOMT Deskbar Fings AVN-DIOMT Deskbar Fig 1-6: Iso View Shown with AVN-DIOMT Deskbar Aached Fig 1-8: AVN-DIO Front Iso View Shown without Accessories AVN-DIO12 Handbook Technical Specification For AVN-DIO12 Microphone XLR Input Pin-out Pin Funcon 1 Chassis Ground 2 Input Phase 3 Input Non Phase Microphone Input - XLR Input Impedance: Maximum Input Level: Gain: Frequency Response: High Pass Filter Response: THD+N: E.I.N.: Common Mode Rejecon: Phantom Power: 2.2k balanced -68dBu (max gain) to -2dBu (min gain) Adjustable 14dB to 86dB 20Hz to 20kHz, +0/-0.5dB (ref 1kHz) Fc = 125Hz @ 6dB per octave <0.01%, -32dBu input, 40dB gain, 20Hz to 20kHz, 20kHz BW 129dBu, 20kHz BW, max gain, Rs=200 >60dB @ 1kHz +48V ± 4V Network and AoIP AoIP Standard: Channels: Flows: Sample Rates: Encoding: AES67 Support: Connecvity: Speed: Dante Domain Manager Ready: Clock Source: PoE Power Standard Class PD Power Range Typical PSE Power Usage Max PSE Power Usage Equipment Type AVN-DIO12: Physical Specificaon Dimensions (Raw): Dimensions (Boxed): Weight Accessories AVN-DIOMT: AVN-DIORK: Dante 2 transmit 2 transmit 44.1kHz, 48kHz, 88.2kHz, 96kHz PCM 16, PCM 24, PCM 32 Yes etherCON (RJ45 compable) 100Mbps Yes Internal (PTP Leader) or Network PTP Leader 802.3af 0 0.44 W to 12.94 W TBD 15.4 W Dual Microphone Input to Dante® with Mic Gain 14.0cm (W) x 13.6cm (D) x 4.2cm (H) 5.5" (W) x 5.4" (D) x 1.7" (H) 17.8cm (W) x 17cm (D) x 5.6cm (H) 7.0" (W) x 6.7" (D) x 2.2" (H) Ne: 0.5kg Gross: 0.7kg Ne: 1.1lbs Gross: 1.4lbs AVN-DIO Large Unit Underdesk Mount AVN-DIO 1U 19" rack kit (5 x small DIO or 3 x large DIO) Fig 1-9: AVN-DIO Rear Iso View Shown without Accessories 7 AVN-DIO12 Handbook www.sonifex.co.uk t:+44 (0)1933 650 700 sales@sonifex.co.uk 8
dev.audinate.com/GA/dante-controller/userguide/pdf/latest/
audinate.com/FAQs | Dante
Welcome to Sonifex - Manufacturers of Broadcast Audio & Video Equipment for Radio & TV StudiosWelcome to Sonifex - Manufacturers of Broadcast Audio & Video Equipment for Radio & TV Studiossonifex.co.uk/registeraudinate.comWelcome to Sonifex - Manufacturers of Broadcast Audio & Video Equipment for Radio & TV Studios