Instructions for mti models including: MBRR6630E Air Bathtub, MBRR6630E, Air Bathtub, Bathtub
MTI Basics MBRR6630E | Soaking, Heated, Whirlpool & Air Bathtub
MTI Baths MBWRR6630EWH at Keidel Serving Cincinnati - Cincinnati-OH
MBRR6630E 65.75" x 30" x 19" Installation: Drop-In Material: Acrylic Plumbed Weight: 140 lbs / 64 kg Soaker Weight: 115 lbs / 52 kg Average Fill: 30 gal to above jet level Maximum Fill: 80 gal to overflow Package Package Content Part # Soaker Soaking bath - No jets. Includes textured bottom. MBSRR6630E Air Bath 12 air jets, heated air blower, pre-leveled foam base and textured bottom. Pre-leveled foam base increases overall tub height 2"-3" MBARR6630E Whirlpool 6 point-massage jets, 1-bhp pump and textured bottom MBWRR6630E Shown with Whirlpool Package 65¾" 15" 8" 21" 3" 19½" 25¼" 4½" 17¼" 15¾" 18¼" 59¼" 129° 47¼" 30" Compliance Label Model MTXXXX Made in USA Complies with ANSI Z124.11995 CSA Certified C/US 19" MTI BASICS® Tubs Options Must be ordered at time of purchase. Standard White (no charge) Color Upgrade: Biscuit (MTISCOLOR) Quick Ship / Priority Soaker & Whirlpool (QSHIPMTIS) Airbath (QSHIPMTISA) Inline Heater For Whirlpool (HTRMTIS) uses existing pump For Soaker & Air Bath (MBHTISOAK) heater with recirculating pump Accessories. Lift and Turn Drain & Overflow Chrome (MBWOC), White (MBWOW), Brushed Nickel (MBWOBN) Pillows Soft Pillow White (MBPSW) Black (MBPSB) Roll-Up Pilow Light Aqua (MBPRUC) Black (MBRUB) Installation Options. Must be ordered at time of purchase. Tile Flange Factory-Installed rigid ABS 3 sides (MBTFK3), 2 sides (MBTFK2), 1 side (MBTFK1) Must specify flange location(s) on order. Pre-Leveled Foam Base 5' Tubs (MBPLFOAM) 5.5' & 6' Tubs (MBPLFOAM2) All airbaths include a pre-leveled foam base. Pre-Leveled Frame and Foam Base with Skirting Raised Fixed Panel 5' Tubs (MBFSKAO5), 5.5' Tubs (MBFSKAO55), 6' Tubs (MBFSKAO6) Raised Removable Panels 5' Tubs (MBFSKAR5), 5.5' Tubs (MBFSKAR55), 6' Tubs (MBFSKAR6) Important Ordering and Installation Information ° Before ordering or installing, consider access to equipment. ° Always measure tub on-site before building tub deck. ° Use proper bedding compound to fully level and support the tub. ° Tubs equipped with an air system or factory installed pre-leveled foam base are designed to install directly onto a flat level subfloor. ° Tub height is increasd up to 3" when equipped with factory-installed foam base. ° Location of all therapy components is predetermined and cannot be changed. ° Options listed cannot be combined with Designer Collection options. Hydrotherapy Package Components Included Soaker with Optional Inline Heater ½-bhp pump, inline heater Whirlpool or Air Bath 1-bhp pump Whirlpool with Optional Inline Heater 1-bhp pump, inline heater Air Bath with Optional Inline Heater heated blower, ½-bhp pump, inline heater CSA Certified C/US; ANSI Z124.1 and ANSI 112.19.7 GFCI / 110V 1-15 amp 1-15 amp 1-20 amp 2-15 amp · Before discarding tub crate, check for accessories that may be packaged inside. · All product measurements are +1/2". · Specifications and configurations are subject to change without notice. · Measurements herein supersede all others published prior to publication date below. NOTE: Filling this tub to the maximum may require an above average size or dedicated water heater. CSA # MTIS-RR6630E Rev. 12 10 2021 ©2021 by MTI Baths, Inc. Modification Rights Reserved.Adobe PDF Library 16.0.3 Adobe InDesign 17.0 (Windows)