MD-R11 Portable Outdoor Radio

Structure Diagram

The portable outdoor radio features the following components:

• 1. Hand Crank
• 2. Frequency Indication
• 3. Function Switch
• 4. Volume Knob
• 5. Antenna
• 6. Compass
• 7. BAND Button
• 8. MODE Button
• 9. (SET) Button
• 10. LIGHT Button
• 11. Flashlight
• 12. Power Switch
• 13. Function Indicators
• 14. Tuning Knob
• 15. Speaker

Other ports and features include:

• Emergency Power Output Switch
• SOS Alert
• Earphone Jack
• Type-C Charging Port
• Previous Button
• Play/Pause Button
• Next Button
• Solar Panel
• USB Port
• TF (Micro SD) Card Slot

TF CARD/USB PLAYBACK

1. Turn on the radio and set the "Function Switch" to M.Play to enter M-PLAY mode. The TF (Micro SD) and USB indicators will light up and flash.
2. When a USB drive or TF (Micro SD) card is successfully read, the corresponding indicator light remains on.
3. If both are read successfully, both indicators stay on. You can switch between them using the "BAND" button.
4. Press the "/" button to switch to the previous or next song. Tap the "K" button to play or pause.
5. Press and hold the "/" button to fast forward or rewind.

WHITE NOISE

1. Turn on the radio and press and hold the "" button to enter white noise playback.
2. Press the "K" button to select from 7 different natural sounds.
3. Press the "K" button to pause, and again to resume.
4. Press the " " button to exit white noise mode.

Note: While in White Noise Mode, other functions like sleep timer, backlight, or spectrum mode cannot be accessed directly. Exit White Noise Mode first.

SOS ALERT FUNCTION

1. Push the switch on the back to the "SOS" position to activate the SOS sound and flashing flashlight.
2. Push the switch back to the middle position to turn off the function.

POWER SWITCH

1. Long press the "" button to turn on the radio.
2. Sleep Timer Setting:
   1. Turn on the radio and press the "" button. The light will flash, entering sleep timer setting.
   2. Press the "" button to select the timer duration (lights 1-7 represent 10-70 minutes, default is 70 minutes). The light will become constant upon successful setting.
3. Long press the "" button again to turn off the radio.

Note: Pressing the "" button during timer setup will exit the setup and return to the previous mode, requiring re-entry.

VOLUME KNOB

The compass and volume knob are integrated. Adjust volume by turning the compass.

CHARGING & DISCHARGING FUNCTION

A. Solar Charging

1. Position the solar panel towards sunlight. The green charging indicator confirms charging.
2. Charging efficiency depends on sunlight intensity.

B. Hand Crank Charging

1. Turn the hand crank clockwise or anti-clockwise. The green charging indicator will light up.
2. Cranking at 130-150 rpm for 1 minute provides over 30 minutes of flashlight use or 3 minutes of radio playback (medium volume).

Notes:

• Crank for 3-5 minutes before first use or after long disuse to activate the internal battery.
• The hand crank is intended for emergency use.

C. Type-C Input

1. Open the dust plug on the back to access the Type-C charging port.
2. Connect the provided Type-C cable to charge the radio. The charging indicator will light up.

Note: The product has voltage protection; charging voltage exceeding 6V will stop charging. Use a 5V 1A/2A adapter.

D. USB Output

1. Push the switch on the back to the "" position to enable charging output. All other functions will be temporarily disabled.
2. Connect a charging cable to the USB output port to charge your device.

Note: Push the switch back to the middle position to restore normal functionality (Bluetooth, Radio, TF card, USB playback).

BACKLIGHT FUNCTION

1. Turn on the radio and long press the "MODE" button to turn on the backlight.
2. Long press the "MODE" button again to turn off the backlight.

RADIO MODE

A. Manual Tuning Mode

1. Set the "Function Switch" to "RADIO".
2. Press the "BAND" button to select FM/AM/SW/WB bands. The corresponding green indicator will light up.
3. For FM/AM/SW/WB bands, manually turn the "Tuning Knob" to find stations.
4. Use the "SET" button to select 1-7 frequencies for the SW band, then use the "Tuning Knob" to tune.

B. Digital Tuning Mode

1. Set the "Function Switch" to "RADIO".
2. Press the " " button to enter digital tuning mode.
3. Press the "BAND" button to select FM/AM/SW/WB bands.
4. FM/AM/WB Bands: Long press the " " button to automatically search and store stations. Use "/" to select previous/next stations.
5. SW Band: Press " " to select SW1-7 bands. Long press " " for automatic search and store. Use "/" to select previous/next stations.
6. WB Band: Long press " " for automatic station search. If a weather alert occurs, an alarm will sound, the flashlight will flash, and it will switch to a news broadcast. Long press " " again to exit search. Use "/" to select previous/next stations.
7. Press the " " button again or turn the "Tuning Knob" to exit digital tuning and return to manual mode.

Notes:

• The radio has memory function for settings when switching modes or restarting.
• If the digital tuning indicator flashes, it means no signal is received. Each band can store up to 70 stations, overwriting previous data. Indicator lights show the number of stations retrieved (1-7 lights for 1-10, 11-20, ..., 61-70 stations).
• WB band only provides alerts and broadcasts during severe weather.
• For FM/SW/WB reception, extend the antenna and find a location with good signal reception, away from electronic interference or steel structures.

POWER INDICATOR & SPECTRUM INDICATOR

A. Power Indicator

Press the "MODE" button (with radio on or off) to display battery status via 1-7 lights (7 lights = >90% battery, 1 light = <15% battery).

B. Spectrum Indicator

1. Press the "MODE" button twice to enter spectrum mode.
2. Press "MODE" again to return to the previous state.

Notes:

• In BT/M.PLAY mode, the device must be read successfully before checking battery or entering spectrum mode.
• Spectrum mode display varies with song tempo and wavelength.

POWER PROTECTION

• The product has protection against overload, short circuits, and over-discharge (below 2.7V) to prevent battery damage.

BLUETOOTH FUNCTION

1. Set the "Function Switch" to BT to enter Bluetooth mode.
2. Turn on Bluetooth on your device, search for "R11", and connect.
3. A "Connected" sound will confirm connection. Use "/" to skip tracks and "K" to play/pause.
4. A "Disconnect" sound indicates disconnection.

Notes:

• Optimal performance is within 8-10 meters.
• Ensure your device is disconnected from other Bluetooth receivers before connecting.
• If connection fails, restart Bluetooth or your device.
• This product acts as a Bluetooth receiver.
• Volume can be controlled by both the product's knob and your connected device.

SPECIFICATIONS

SAFETY PRECAUTIONS

• For first use or after 60 days of disuse, hand-crank for 1 minute or solar charge to rejuvenate the battery.
• Avoid strong impacts, dropping, and corrosive liquids.
• Avoid over-discharging the battery to prolong its lifespan.
• Do not expose eyes directly to the flashlight beam.

WARRANTY

This product includes a 12-month warranty against manufacturing defects, starting from the date of purchase.

PACKAGE INCLUDES

• Radio x1
• Packaging Box x1
• User Manual x1
• Type-C Cable x1

FCC Compliance

This equipment complies with FCC radiation exposure limits for an uncontrolled environment and Part 15 of the FCC Rules. Operation is subject to conditions preventing harmful interference. It has been tested and found to comply with Class B digital device limits, designed to provide reasonable protection against harmful interference in residential installations. Changes or modifications not expressly approved by the responsible party could void the user's authority to operate the equipment.