Coronado Wall Mounted Chrome Soap Dispenser Installation Guide
This guide provides step-by-step instructions for installing the Orren Ellis Coronado Wall Mounted Chrome Soap Dispenser.
Step 1: Preparation and Parts Identification
Tools: A drill with a 6mm drill bit and a screwdriver are required. (See Diagram 1).
Parts: Identify all included components: soap dispenser body, mounting bracket, screws, and wall plugs. (See Diagram 2).
Main Units: Familiarize yourself with the dispenser unit and any support bars or covers. (See Diagram 3).
Step 2: Wall Mounting Preparation
Drill a 6mm hole into the wall at the desired location. Insert a wall plug into the hole. (See Diagram 1).
Alternatively, drill pilot holes as needed for the mounting bracket. (See Diagram 9).
Ensure screws and wall plugs are ready for use. (See Diagram 10).
Step 3: Attaching the Dispenser
Use a screwdriver to attach the mounting bracket securely to the wall. (See Diagram 4).
Align the dispenser bar with the mounting points on the wall bracket. (See Diagram 5).
Secure the dispenser to the wall bracket, potentially using screws. (See Diagram 6 and Diagram 11).
Mount the dispenser unit onto the wall bracket. (See Diagram 7).
Step 4: Final Installation
The dispenser should now be mounted on the wall. (See Diagram 8).
Confirm the dispenser is firmly attached and correctly installed. (See Diagram 12).
