CISCO Business Dashboard for Microsoft Azure Installation Guide

Installation Guide for CISCO models including: Business Dashboard for Microsoft Azure, Dashboard for Microsoft Azure, Microsoft Azure, Business Dashboard, Dashboard

Cisco Business Dashboard Installation Guide for Microsoft Azure

Unknown

PDF - Complete Book (1.72 MB)

Cisco Business Dashboard Installation Guide for Microsoft Azure - Cisco

File Info : application/pdf, 14 Pages, 1.72MB

b cisco business dashboard installation guide for microsoft azure

Cisco Business Dashboard Installation Guide for Microsoft Azure
First Published: 2021-09-24 Last Modified: 2023-10-19
Americas Headquarters
Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000
800 553-NETS (6387) Fax: 408 527-0883

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.
THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.
The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB's public domain version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California.
NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED "AS IS" WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.
IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.
All printed copies and duplicate soft copies of this document are considered uncontrolled. See the current online version for the latest version.
Cisco has more than 200 offices worldwide. Addresses and phone numbers are listed on the Cisco website at www.cisco.com/go/offices.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: https://www.cisco.com/c/en/us/about/legal/trademarks.html. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1721R)
© 2023 Cisco Systems, Inc. All rights reserved.

CONTENTS

CHAPTER 1 CHAPTER 2

Cisco Business Dashboard Overview 1 About Cisco Business Dashboard 1 Device Management Mode 2 Audience 2 Related Documents 2 Terminology 3 System Requirements for Cisco Business Dashboard 4
Installing Cisco Business Dashboard with Microsoft Azure 7

Cisco Business Dashboard Installation Guide for Microsoft Azure v

Contents
Cisco Business Dashboard Installation Guide for Microsoft Azure vi

1 C H A P T E R
Cisco Business Dashboard Overview
This chapter contains the following sections: · About Cisco Business Dashboard , on page 1 · Device Management Mode, on page 2 · Audience, on page 2 · Related Documents, on page 2 · Terminology, on page 3 · System Requirements for Cisco Business Dashboard, on page 4
About Cisco Business Dashboard
Cisco Business Dashboard provides tools that help you monitor and manage the devices in your Cisco Business network. It automatically discovers your network, and allows you to configure and monitor all supported devices such as switches, routers, and wireless access points. It also notifies you about the availability of firmware updates, and about any devices that are no longer under warranty or covered by a support contract. You can view the application by clicking Request a Demo Cisco Business Dashboard is a distributed application which is comprised of two separate components or applications as described below:
The Dashboard Cisco Business Dashboard also referred to as the Dashboard, is installed at a convenient location in the network. From the Dashboard user interface, you can get a high-level view of the status of all the sites in your network, or concentrate on a single site or device to see information specific to that site or device.
The Probe Cisco Business Dashboard Probe also referred to as the Probe is installed at each site in the network and associated with the Dashboard. The probe performs network discovery and communicates directly with each managed device on behalf of the Dashboard.
Cisco Business Dashboard Installation Guide for Microsoft Azure 1

Device Management Mode

Cisco Business Dashboard Overview

Note Certain network devices support being directly associated with the Dashboard and managed without a probe being present. When network devices are being managed directly in this way, all management functions are available for the device, but the network discovery process may not be as comprehensive as when a probe is present.
Device Management Mode
Direct Managed Certain devices can support direct association with the Dashboard and managed without a probe being present in the network. In a direct managed network, you will need to connect the first device to the Cisco Business Dashboard manually. Then, this device reports information such as CDP, LLDP, and mDNS (aka Bonjour) to Dashboard. This information is used to identify additional devices in the network, Dashboard then connects these devices to itself automatically hence those devices become manageable, and the process repeats until all devices have been discovered. Depending on the size of your network, this process may take tens of minutes. You may optionally have the dashboard explicitly search the IP address ranges to discover network devices, which can be in other VLANs or subnets. Direct managed network is recommended if all your devices support direct management.
Probe Managed Probe is installed at each site in the network and associated with the Dashboard. The Probe performs network discovery and communicates directly with each managed device on behalf of the Dashboard. A software Probe is a probe running in a virtual machine or on a Linux host. A software Probe can generally manage up to 50 network devices. Certain devices include the Probe application embedded in the device firmware. An embedded Probe can manage up to 15 network devices. In one network you should only enable one Probe.
Audience
This guide is primarily intended for network administrators who are responsible for Cisco Business Dashboard software installation and management.
Related Documents
The documentation for Cisco Business Dashboard is comprised of a number of separate guides. These include: Installation Guides The following table lists all the installation guides for Dashboard software that can be deployed on different platforms. Refer the path provided in the location column for details:

Cisco Business Dashboard Installation Guide for Microsoft Azure 2

Cisco Business Dashboard Overview

Terminology

Supported Platforms Location

Microsoft Azure

This document.

Amazon Web Services Cisco Business Dashboard & Probe Installation Guide for Amazon Web Services (AWS)

Oracle VirtualBox

Cisco Business Dashboard & Probe Installation Guide for Oracle VirtualBox

Microsoft Hyper-V

Cisco Business Dashboard &Probe Installation Guide for Microsoft Hyper-V

VMWare vSphere,

Cisco Business Dashboard & Probe Installation Guide for VMWare

Workstation and Fusion

Ubuntu Linux (Dashboard and Probe) and Raspbian Linux (Probe only)

Cisco Business Dashboard & Probe Installation Guide for Linux

Quick Start Guide--This provides details on performing the initial setup for Cisco Business Dashboard using the most commonly selected options. Refer to Cisco Business Dashboard Quick Start Guide .
Administration Guide--This is a reference guide that provides details about all the features and options provided by the software and how they may be configured and used. Refer to Cisco Business Dashboard Administration Guide.
Device Support List--This list provides details of the devices supported by Cisco Business Dashboard and the features available for each device type. For a list of all the devices supported by Cisco Business Dashboard, refer to Cisco Business Dashboard - Device Support List.

Terminology

Term

Description

Hyper-V

A virtualization platform provided by Microsoft Corporation.

Open Virtualization A TAR archive containing one or more virtual machines in OVF format. It is a

Format (OVF)

platform-independent method of packaging and distributing Virtual Machines (VMs).

Open Virtual

Package that contains the following files used to describe a virtual machine and saved

Appliance or

in a single archive using .TAR packaging:

Application (OVA) file

· Descriptor file (.OVF)

· Manifest (.MF) and certificate files (optional)

Raspberry Pi Raspberry Pi OS

A very low cost, single board computer developed by the Raspberry Pi Foundation. For more information, see https://www.raspberrypi.org/.
Formally known as Raspbian, the Raspberry Pi OS is a Debian-based linux distribution optimized for the Raspberry Pi. For more information, see https://www.raspberrypi.org/software/.

Cisco Business Dashboard Installation Guide for Microsoft Azure 3

System Requirements for Cisco Business Dashboard

Cisco Business Dashboard Overview

Term

Description

VirtualBox

A virtualization platform provided by Oracle Corporation.

Virtual Hard Disk Virtual hard disk is a disk image file format for storing the complete contents of a hard

(VHD)

drive.

Virtual Machine (VM)

A virtual computing environment in which a guest operating system and associated application software can run. Multiple VMs can operate on the same host system concurrently.

· VMWare ESXi A virtualization platform provided by VMWare Inc.
· VMWare Fusion
· vSphere Server
· VMWare Workstation

vSphere Client
Hypervisor
Amazon Web Services (AWS) Micosoft Azure Active Directory

User interface that enables users to connect remotely to vCenter Server or ESXi from any Windows PC. You can use the primary interface for vSphere Client to create, manage, and monitor VMs, their resources, and the hosts. It also provides console access to VMs.
Also known as a virtual machine monitor or VMM, is software that creates and runs virtual machines (VMs). A hypervisor allows one host computer to support multiple guest VMs by virtually sharing its resources, such as memory and processing.
An on-demand cloud computing platform.
A cloud-based identity and access management service that provides single sign-on and multi-factor authentication to help protect users from 99.9 percent of cybersecurity attacks.

System Requirements for Cisco Business Dashboard
Cisco Business Dashboard is available for Microsoft Azure (https://azuremarketplace.microsoft.com). To run Cisco Business Dashboard in Azure, you will need an Azure account. The following Azure Virtual Machine sizes are supported:
· Standard_F2s_v2 -- up to 300 devices under management.
· Standard_F4s_v2 -- up to 300 devices and integrated with external applications.
· Standard_F16s_v2 -- up to 3000 devices under management.
Cisco Business Dashboard is administered through a web user interface. To use this interface, your browser must be one of the following:
· Apple Safari (macOS only) -- 2 most recent major versions

Cisco Business Dashboard Installation Guide for Microsoft Azure 4

Cisco Business Dashboard Overview

System Requirements for Cisco Business Dashboard

· Google Chrome -- Latest version · Microsoft Edge -- 2 most recent major versions · Mozilla Firefox -- Latest version
Note When using Safari, check that the certificate from Cisco Business Dashboard Probe is set to Always Trust. Otherwise, certain functions that depend on the use of secure websockets are expected to fail. This is a limitation of the Safari web browser.
Your network must allow all instances of Cisco Business Dashboard Probe and directly managed network devices to establish TCP connectivity with Cisco Business Dashboard. For more details on the ports and protocols used, see Frequently Asked Questions in the Cisco Business Dashboard Quick Start Guide.

Cisco Business Dashboard Installation Guide for Microsoft Azure 5

System Requirements for Cisco Business Dashboard

Cisco Business Dashboard Overview

Cisco Business Dashboard Installation Guide for Microsoft Azure 6

2 C H A P T E R
Installing Cisco Business Dashboard with Microsoft Azure
Cisco Business Dashboard is available for Microsoft Azure through the Azure Marketplace (https://azuremarketplace.microsoft.com). Navigate to the Azure Marketplace and search for "Cisco Business Dashboard" to locate the product listing. With Microsoft Azure, licensing for Cisco Business Dashboard is provided through a Bring Your Own License (BYOL) model, where device licenses are managed using Cisco Smart Licensing in exactly the same way that they would be if the Dashboard was deployed on your own hardware. Device licenses may be purchased through your Cisco reseller. Prior to deploying Cisco Business Dashboard with Azure, you must have an Azure account. For help in getting started with Azure, see https://azure.microsoft.com/en.us/get-started/. To deploy Cisco Business Dashboard from the Azure Marketplace, use the following steps: 1. Navigate to the Azure Marketplace at https://azuremarketplace.microsoft.com/ and log in to your Azure
account. 2. Enter Cisco Business Dashboard into the search box. Select the listing and click the Get It Now button. 3. Confirm the plan you are using and click Continue. 4. Click Create to open the Create a virtual machine page with the Cisco Business Dashboard image
selected. 5. Fill out the rest of the form, choosing settings that are appropriate for your environment.
Note The username you create here will become the account used to log on to the operating systems for this instance. For other Cisco Business Dashboard deployments, the default username is cisco and that username is used in the Cisco Business Dashboard documentation. If the documentation says to log on to the operating system with username cisco, you should substitute the username you create here instead.
6. Click through each of the settings pages to customize the virtual machine configuration, or click Review + Create to accept the defaults and skip to the end of the setup process.
7. Click Create to create the virtual machine instance. Once created, the instance may be managed through the Azure portal.
Cisco Business Dashboard Installation Guide for Microsoft Azure 7

Installing Cisco Business Dashboard with Microsoft Azure
Alternatively, you can deploy Cisco Business Dashboard directly from the Azure portal using the following steps: 1. Log in to the Azure portal at https://portal.azure.com. 2. Open the Virtual Machines page and click Create to create a new virtual machine. 3. Enter a name for the virtual machine, and in the drop-down menu under the Image click See all images. 4. Enter Cisco Business Dashboard into the Marketplace search box, and select the plan from the listings
that are displayed. 5. Fill out the rest of the form, choosing settings that are appropriate for your environment.
Note The username you create here will become the account used to log on to the operating systems for this instance. For other Cisco Business Dashboard deployments, the default username is cisco and that username is used in the Cisco Business Dashboard documentation. If the documentation says to log on to the operating system with username cisco, you should substitute the username you create here instead.
6. Click through each of the settings pages to customize the virtual machine configuration, or click Review + Create to accept the defaults and skip to the end of the setup process.
7. Click Create to create the virtual machine instance. Once created, the instance may be managed through the Azure portal.
After the instance has launched, the Cisco Business Dashboard application will start automatically. Refer to the Cisco%20Business%20Dashboard%20and%20Probe%20Quick%20Start%20Guide for details of how to access the application and perform initial setup.
Cisco Business Dashboard Installation Guide for Microsoft Azure 8

References

DITA Open Toolkit XEP 4.30.961; modified using iText 2.1.7 by 1T3XT