Model: TCAM2

Brand: VOLVO

Version: 1.1 - English

Date: 2023-04-13

RED (Europe): Declaration of Conformity (DoC) to RED regulation 2014/53/EU

Hereby, Harman Becker Automotive Systems GmbH declares that the radio equipment type TCAM2 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity will be available on the Harman official Address: http://www.harman.com/compliance

[CE Mark]

Frequency band(s) in which the radio equipment operates:

Maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates.

Bluetooth LE RF Transmitter Output Power: <5dBm

NAD Module RF Transmitter Output Power:

• GSM: Class 4 (+33 dBm± 2 dB) for EGSM 900, Class 1 (+30 dBm± 2 dB) for GSM 1800, Class E2 (+27 dBm± 3 dB) for GSM 900 8-PSK, Class E2 (+26 dBm + 3/– 4 dB) for GSM 1800 8-PSK
• UMTS: Class 3 (+24 dBm + 1/- 3 dB)
• LTE: Class 3 (+23 dBm± 2 dB)
• 5G: Class 3 (+23 dBm+2/-3 dB)*

* For most bands. Some exceptions exist, per 3GPP standard

Manufacturer

Harman Becker Automotive Systems GmbH

Becker-Goering-Strasse 16

76307 Karlsbad, Germany

FCC/ISED statements (North America and Canada)

FCC ID: T8GTCAM2

Contains FCC ID: T8GSAN9200

IC: 6434A-TCAM2

Contains IC: 6434A-SAN9200

License-exempted frequency bands:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Equipment is compliant with ISED's license-exempt radio apparatus standards. Operation is authorized under the following two conditions:
1. The apparatus must not produce interference;
2. The apparatus must accept any radio interference suffered, even if the interference is liable to compromise its operation.

Modification statement:

The party responsible for the compliance has not approved any changes or modifications to this device by the user. Any changes or modifications could void the user's authority to operate the equipment.

The product homologation responsible party has not approved any modification to the apparatus by the user, whatever its nature. Any change or modification may void the user's right to operate the apparatus.

Wireless notice:

This device complies with FCC/ISED radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the ISED radio frequency (RF) Exposure rules. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The closer distance between the Cellular internal antennas and the head of the closest passenger will be 86.5 mm and the minimum distance between the BTLE internal antenna and the head of the closest passenger will be 118.0 mm. The device has been tested placed at the centre of the flat phantom with its back side facing the flat phantom surface simulating the normal use conditions at a conservative testing distance of 40 mm according to manufacturer request.

This device complies with FCC/ISED radio frequency (RF) exposure rules. The transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. The shortest distance between the internal cellular antennas and the head of the nearest passenger will be 86.5 mm and the minimum distance between the internal BTLE antenna and the head of the nearest passenger will be 118.0 mm. The device was tested at the center of the flat phantom, with its back facing the flat phantom surface, simulating normal use conditions at a conservative test distance of 40 mm, as requested by the manufacturer.

CAN ICES-3 (B) / NMB-3 (B)

This Class B digital apparatus complies with Canadian ICES-003.

This Class B digital apparatus complies with Canadian standard ICES-003.

FCC Class B digital device notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.