Trevi XF 3600 PRO
User Guide
Product Overview
The Trevi XF 3600 PRO is a high-power portable amplified speaker designed for versatile audio playback. It features wireless connectivity, USB/Micro SD playback, a disco light effect, LED display, and True Wireless Stereo (TWS) capability.
Key Features:
- Wireless Connection
- USB/Micro SD Player
- Disco Light
- LED Display
- 200W Max Power
- TWS (True Wireless Stereo)
- Microphone Input (Italian territory usage noted)
Country Restrictions: The product has limited implementation in Estonia, Finland, France, Greece, Lithuania, Poland, and Spain.
For additional information and updates, visit www.trevi.it.
Safety Warnings
General Safety:
- Electrical Shock Hazard: Do not expose to rain or humidity. Do not open the unit; there are no user-serviceable parts inside. Refer servicing to authorized TREVI centers.
- Operation Environment: Avoid placing near heat sources, very humid or dusty places, or areas with strong vibrations. Ensure adequate air circulation around the unit (at least 5 cm).
- Liquid Exposure: Do not expose to dripping or splashing water. Do not place liquid-filled objects on the unit. If liquid enters the appliance, unplug immediately and contact a TREVI service center.
- Power: Ensure the power adapter is connected to an easily accessible socket. If excessive heat is noticed, disconnect immediately. Do not pull the power cord.
- Battery Safety: Recharge the battery at ambient temperatures between 5°C and 35°C. Do not overcharge. Avoid recharging overnight. Recharge periodically during long periods of inactivity.
- Hearing Protection: Limit listening to high volumes for extended periods to prevent hearing damage. Keep volume low during initial setup and ignition.
UK Plug Wiring: The mains lead wires (Blue for Neutral, Brown for Live) must be connected to the plug terminals accordingly. The earth terminal should not be used. Replace fuses with a 3 Amp. ASTA approved BS 1362 fuse.
Controls and Operation
The unit features various controls on the top panel and a remote control for comprehensive operation.
Unit Controls:
- Microphone Echo: Adjusts echo effect for microphones.
- Guitar Volume: Controls volume for guitar input.
- REC Button: Starts/stops recording.
- Microphone Volume: Adjusts microphone volume.
- LED Light Button: Selects disco light effects.
- PREV Button: Selects previous track.
- MODE Button: Selects input mode (Wireless, USB/SD, AUX).
- NEXT Button: Selects next track.
- Wireless Button: Activates wireless connection.
- VOLUME Knob: Adjusts overall playback volume.
- PLAY(pause)/TWS Button: Controls playback and TWS pairing.
- Microphone Priority Button: Prioritizes microphone input.
- TREBLE Control: Adjusts high frequencies.
- BASS Control: Adjusts low frequencies.
- POWER ON/OFF Switch: Powers the unit on/off.
- Micro SD Slot
- USB Port
- AUX IN Jack
- Microphone Jack 1
- Microphone Jack 2
- Guitar Input
- AC Power Outlet
Remote Control Functions:
- Stand-by Button: Powers the unit on/off.
- REC Button: Starts/stops recording.
- VOL+ / VOL-: Adjusts volume.
- Track Navigation: Previous (◀/CH-) and Next (►►/CH+) buttons.
- Repeat Button: Sets repeat mode (single track or all tracks).
- Numeric Buttons (0-9): Directly select tracks.
- EQ Sound Mode: Selects preset equalizer settings (POP, ROCK, JAZZ, CLASSIC, FLAT).
- Mode Function Button: Selects input mode (AUX/USB/SD/Wireless).
- MUTE Button: Mutes audio output.
Battery Installation (Remote): Insert 2 AAA batteries, observing polarity.
Transportation: Use the top handle, fold the unit slightly, and use the rear wheels.
Power On/Off: Use the POWER switch (15).
Recharging Battery: Turn POWER switch to '0' (OFF), connect power cable. Wait for battery icon segments to be solid. For longer life, disconnect after max 15 hours.
Stand-by Mode: Use the Stand-by button (23) on the remote.
Mode Selection: Press the MODE button (7) or Wireless button (9) to cycle through Wireless, USB/SD, and AUX-IN modes.
Volume Adjustment: Use the VOLUME knob (10) or VOL+ / VOL- buttons (27, 25) on the remote. Use VOL- MIC knob (7) for microphone volume.
Pre-Equalizer: Press the EQ button (30) to select one of 6 audio equalization modes.
Tone Adjustment: Use BASS (14) and TREBLE (13) knobs.
Mic Echo Effect: Use the ECHO knob (1) to adjust the echo effect.
Features and Functions
Disco Light Effects: Press the Disco Light button (5) multiple times to cycle through light effects.
Voice Announcement: Press and hold the MODE button (7) to activate/deactivate English voice guidance.
FM Radio: Select RADIO mode, press >II (11) or II /TWS (32) to start automatic station search and storage. Use track buttons (6, 8, 26, 31) to navigate presets.
Wireless Function: Select Wireless mode (display shows "BLUE"). Activate wireless on your external device, search for "XF 3600 PRO", and pair (password "0000" if required). Press >II (11) or II /TWS (32) to play.
TWS (True Wireless Stereo) Connection: Enables pairing of two identical speakers for stereo sound. Deactivate phone wireless, turn on both speakers, select 'Wireless' mode, press and hold >II (11) on one unit for TWS pairing. Then pair the phone to the system.
USB/SD Input: Insert USB drive or Micro SD card. Playback starts automatically. Use playback controls and numeric keypad for track selection. Use repeat button (28) for single or all track repeat.
AUX-IN: Connect an external audio device using a 3.5mm jack cable to the AUX IN (18) port.
Wireless Microphone: Insert 2 AA batteries. Turn on the microphone and adjust MIC VOL (4). Low battery indicated by flashing power light. Effective range approx. 15m. Avoid interference with other devices.
Voice Recording: The unit can record voice via the microphone to USB/SD memory, creating a 'Record' folder. Press REC (3) or (24) to start/stop recording. Only voice can be recorded.
Troubleshooting
If a problem occurs, consult the following table. If the issue persists, contact your retailer.
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound when Power ON | 1. No sound source. 2. Volume at 0. 3. Voice guide off. 4. No USB/SD device connected. | 1. Connect AUX-IN device. 2. Adjust volume. 3. Activate voice guide. 4. Connect USB/SD and play MP3. |
| Distorted sound | 1. Volume too high. 2. Audio file error. | 1. Lower volume. 2. Check and play another audio file. |
| No sound from microphone | 1. Microphone socket not properly connected. 2. Microphone switch off. 3. Microphone volume low. | 1. Ensure correct connection. 2. Turn on microphone. 3. Adjust microphone volume. |
| No sound from USB/SD Card | 1. Incorrect file format. 2. USB/SD card not properly connected. | 1. File format must be MP3. 2. Connect USB/SD card correctly. |
| Unable to charge or short battery life | 1. Power cord not connected. 2. Battery not fully charged. 3. Battery life ended. | 1. Check power cord connection. 2. Extend charging time (6-8 hours). 3. Replace battery. |
| Loud noises from speakers | 1. Microphone too close. 2. Microphone not in use. 3. Microphone volume too high. 4. Mobile phone too close. 5. Other wireless devices too close. | 1. Keep mic 2m from speaker. 2. Turn off mic if not in use. 3. Lower mic volume. 4. Keep phone away during calls. 5. Keep speaker away from wireless devices. |
Battery Removal and Disposal
Battery Removal: This operation should only be performed by qualified personnel. Ensure the unit is unplugged. Remove screws, metal panel, disconnect and remove the battery. Replace with one of the same specifications.
Disposal: Used batteries should not be disposed of with household waste, fire, or water. Recycle or dispose of them at designated collection centers. The symbol on the product indicates separate collection for waste electrical and electronic equipment (WEEE). Users must take the product to specialized collection centers or return it to the retailer upon purchase of a new equivalent product. Proper disposal helps prevent negative environmental and health effects and promotes material recycling.
Technical Specifications
- Power Supply: 100-240V ~ 50/60Hz
- Power Consumption: Internal rechargeable lithium battery 12.8V === 8A, Max 100W
- Output Audio Power: 200W
- FM Frequency Band: 87.5MHz - 108MHz
- Operating Temperature: 0°C ~ 40°C
- Frequency Response: 40Hz - 20KHz
- S/N Ratio: >68dB
- Bluetooth Max Transmission Power: 0.8mW
- Bluetooth Band: 2.4GHz
- Wireless Microphone Frequency: 668.5MHz
- Dimensions: 380 x 350 x 860mm
- Weight: 18.5 Kg
Declaration of Conformity
TREVI S.p.a. declares that the radio equipment type "Power portable speaker with trolley" model XF 3600 PRO complies with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at: https://www.trevi.it/dms/zidi/TREVI/DOCXF3600PRO.pdf
If your language is not found in the manual, please visit www.trevi.it.
