Milesight | 5G, AI, IoT and LoRaWAN®Download Center
User Guide for Milesight models including: PM2201 Indoor Parking Camera, PM2201, Indoor Parking Camera, Parking Camera, Camera
Indoor Parking Guidance Camera | Milesight
File Info : application/pdf, 7 Pages, 5.79MB
DocumentDocumentIndoor Parking Guidance Camera
User Manual
Datasheet
All Software &files can be downloaded from https://www.milesight.com/support/download
Milesight
PARKING MANAGEMENT
Table of Content
1. Package Contents....................................................................................................... 2 2. Hardware Overview................................................................................. 2 3. Dimensions............................................................................................................ 3 4. Installation............................................................................................................ 3 5. Assigning an IP Address by Using Smart Tools.................................................... 6 6. Assigning an IP Address via Browser....................................................................... 7 7. Accessing from the Web Brower.......................................................................... 7 8. FCC Statement ..................................................................................................... 8
www.milesight.com
Indoor Parking Guidance Camera x1
Punch a hole
Perforation-assisted Stickers Note: The recommended hole diameter is 34mm.
Perforation-assisted Stickers x1
Quick Start Guide x 1 Lens
i
AUDIO OUT G
Warranty Card x1
hexagon nut
Lens Indicator light
Ethernet Port (PoE) Ethernet Port (PoE) DC 12V Audio Out RS485
12 2
www.milesight.com
PM3322-PE Ø160
85 97.5
18 Ø33
M33*2.5 30
Step 1: Punch a hole in the slot above the corresponding monitoring position in the indoor parking lot according to the instructions of the perforation-assisted stickers.
Stickers hole
PerdfiNaootrme:eattTeirh ioesrne3-c4aomsmms.imesntdeedd
Punch a hole
Perforator
Note: The recommended hole diameter is 34mm. It is best to punch hole according to the instructions for perforation-assisted stickers.
www.milesight.com
3 13
AUODUIOT G i
OAUUTDGIO
i
Step 2: Loosen the hexagon nut at the top of the camera and remove it. Step 3: Thread the tail cable of the device port into the punched cable slot.
Step 4: Put the hexagon nut removed by step2 back into the camera through the tire cable wire, align it with the hexagon nut thread on the upper part of the camera and tighten it.
i OUATUDGIO
Step 5: Adjust the camera position as needed to match the monitoring of the 6 parking space.
15° 30°
30° 15°
Note: You can adjust the angle of the two lenses of the camera as needed by 15° up and 15° down, 30° left and 30° right.
4
www.milesight.com
www.milesight.com
5
A1 A2 A3
Step 6: Finish the installation, and the camera can manager up to 6 parking spaces at the same time.
5. Assigning an IP Address by Using Smart Tools
Smart Tools is a software tool which can automatically detect multiple online Milesight network cameras in the LAN, set IP addresses, and manage firmware upgrades. It's recommended to use when assigning IP addresses for multiple cameras.
B1 B2 B3
The steps to change the IP of cameras are as below: 1) Start Smart Tools, click the IPC Tools page, then enter the device information, such as IP address, MAC address, Port number, Netmask, and Gateway, then all related Milesight network cameras in the same network that will be shown. 2) Select a camera or multiple cameras according to the MAC addresses. 3) Click "Activate" to set the password when using the cameras for the first time (Password must be 8 to 32 characters long, contain at least one number and one letter), and set three security questions (If you forget the password, you can reset the password by answering three security questions correctly). 4) Type the user name and password you set, change the IP address or other network values, and then click "Modify" button. 5) By double clicking the selected camera or the browser of interested camera, you can access the camera via web browser directly. More usage of Smart Tools, please refer to the "Smart Tools User Manual".
If the network segment of the computer and that of the camera are different, please add some 192.168.5.xx(255.255.255.0) for your PC to get access to your cameras, more details can be found on "Milesight Network Camera Quick Start".
The camera can be used with the most standard operating systems and browsers. The recommended browsers are Internet Explorer, Firefox, Chrome, Safari. More information about the plugin installation, please refer to the troubleshooting: 5.Milesight-Troubleshooting-Plugin Installation on Windows-IPC 6.Milesight-Troubleshooting-Plugin Installation on MAC
6
www.milesight.com
www.milesight.com
7
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1.Reorient or relocate the receiving antenna. 2.Increase the separation between the equipment and receiver. 3.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4.Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
8
www.milesight.com
91
PM2201 200g+80g 120x85mm 43.005.000191 V2.0