Manual-Hub.com - Free English product PDF Documents!
Instructions for CHANNEL VISION models including: C-0410 Phone Surge Protection Module, C-0410, Phone Surge Protection Module, Surge Protection Module, Protection Module
CHANNEL VISION C-0410 (01) PDF MANUAL - MANUAL-HUB.COM
File Info : application/pdf, 2 Pages, 788.46KB
DocumentDocument10 Channel Vision Technology will repair or replace any defect in material or workmanship which occurs during normal use of this product with new or rebuilt parts, free of charge in the USA, for ten years from the date of original purchase. This is a no hassle warranty with no mail in warranty card needed. This warranty does not cover damages in shipment, failures caused by other products not supplied by Channel Vision Technology, or failures due to accident, misuse, abuse, or alteration of the equipment. This warranty is extended only to the original purchaser, and a purchase receipt, invoice, or other proof of original purchase date will be required before warranty repairs are provided. Mail in service can be obtained during the warranty period by calling (800) 840-0288 toll free. A Return Authorization number must be obtained in advance and can be marked on the outside of the shipping carton. This warranty gives you specific legal rights and you may have other rights (which vary from state to state). If a problem with this product develops during or after the warranty period, please contact Channel Vision Technology, your dealer or any factory-authorized service center. C H A N N E L V I S IONTM Central TELEPHONE LIGHTNING PROTECTION INPUT C-0410 OUTPUTS AUTOMATICALLY RESETS Exceeds FCC part 68 type A+B and UL parts 1459 & 1950 C-0410 Phone surge protection module 500-065 RevC1 https://manual-hub.com/ From Telephone Company Model C-0410 Telephone surge protection module C-0410 C H A N N E L V I S IONTM Central TELEPHONE LIGHTNING PROTECTION (see below) INPUT C-0410 OUTPUTS AUTOMATICALLY RESETS Exceeds FCC part 68 type A+B and UL parts 1459 & 1950 INPUT SERVICE OUTPUT C H A N N E L V I S IONTM Central C-0432 C-0432 (telephone distribution) G-Kit 5 (wall plate kit) Features: Protects against phone line transients caused by lighting, power cross, and other conditions. Exceeds FCC Part 68 A and Type B lightning immunity requirements. Bellcore 1 compliant (GR-1089) (2500V@500amps) Easily connects to phone distribution modules using: C0408 or C-0409 jumper cables Snaps easily into Channel Vision Central enclosures: C0112E, C-0119E, C-0138E, and C-0150E. Suggested wiring: CAT5 wire from distribution to wallplate CAT5 interconnects (models C-0408 and C-0409) Telephone Installation: Punch down as many as 4 incoming telephone lines on the input 110 punch-down as shown. Use a 110 punch-down tool to seat and trim all wires Note position of cutter Specifications: Telco inputs: Outputs: Dimensions: Connect any of the telephone outputs to wall plates in each room (see diagram). 2 https://manual-hub.com/ 1-110 punch-down 2 (1-RJ45 and 1-110) 3.0"L x 6.38" W x 1.75" D Specifications subject to change without notice. 3