User Manual for Motherboard models including: Packard Bell Bora Pro Motherboard, Packard Bell, Bora Pro Motherboard, Pro Motherboard, Motherboard
File Info : application/pdf, 2 Pages, 178.27KB
DocumentDocument11/3/22, 10:06 AM Packard Bell Bora Pro Motherboard Packard Bell Bora Pro M/Board Specification Audio : Creative 1373. BIOS : AMI BIOS. Cache : Integrated in CPU. Chipset : Intel 82440ZX PCI set (82443ZX PCI/AGP controller (PAC) and 82371EB PCI/ISA IDE Xcelerator (PIIX4)). CPU Support : Slot 1: Intel Pentium II, Pentium III or Celeron. Expansion Slots : 2 PCI slots and 1 shared ISA/PCI slot. Form Factor : MicroATX RAM : 2 DIMM sockets supporting single- or double-sided SDRAM up to a maximum of 256 MB. Video : 3DFX Voodoo 3, 8 MB SGRAM. Upgrade Options CPU : CPU upgradeable to Intel Pentium II 333/66 MHz or 600/100 MHz, Pentium III up to 500 MHz, Celeron up to 466 MHz. RAM : Upgradable up to 512 MB using 66 or 100 MHz SDRAM DIMMs. The Bora Pro motherboard only accepts 168-pin DIMM modules. Only gold-plated DIMMs may be used, as the sockets on the motherboard are also gold-plated, and oxidation must be prevented. Use 3.3 V CAS Latency 2 or 3, single- or double-sided DIMMs only. Parity is not supported. https://pb.retropc.se/borapro.html 1/2 11/3/22, 10:06 AM Jumpers Packard Bell Bora Pro Motherboard Jumper Configuration BAT1 - Clear CMOS 1-2 : Normal operation (default) 2-3 : Clear CMOS settings (keep system unplugged for five seconds) JP14 - Clear BIOS Password ON : OFF Keep password (default) : Password is cleared JUSB - Front USB 1-4, 2-5 : Front USB enabled (upper back USB 'C' disabled) 2-5, 3-6 : Upper Back USB 'C' enabled (front USB disabled) SW1 - Four 2-pin jumpers to set multiplier: Multiplier 1 2 3 4 x3.5 ON OFF OFF ON x4 ON OFF ON OFF x4.5 ON ON OFF OFF x5 ON ON OFF OFF x5.5 ON OFF OFF OFF x6 OFF ON ON ON x6.5 OFF OFF ON ON https://pb.retropc.se/borapro.html 2/2