Frequently Asked Questions | GameStop
Instruction Manual for METAL GEAR SOLID models including: KNMI-MGSD, KNMI-MGSD Wireless Gaming Headset Receiver, Wireless Gaming Headset Receiver, Gaming Headset Receiver, Headset Receiver
DONG GUAN FENG RUI ELECTRONICS TECHNOLOGY CO. LTD. KNMI-MGSD MGSD Wireless Gaming Headset Receiver 2BKUNKNMI-MGSD 2BKUNKNMIMGSD knmi mgsd
File Info : application/pdf, 2 Pages, 1.42MB
DocumentDocumentCONTACT US https://www.gamestop.com/contact Phone: 1 (800) 883-8895 WHAT'S INCLUDED · 1x Wireless Headset · 1x 2.4G Wireless Receiver · 1x USB-C to USB-A Cable · 1x USB-C to AUX Cable · 1x Instruction Manual · 1x USB-A to USB-C Adapter SPECIFICATIONS · Connection: 2.4G Wireless (via dongle), Bluetooth 5.3, or Wired (3.5mm/USB-A) · Frequency Response: 20Hz 20kHz · Impedence: 32 · Speaker Sensitivity: 99dB ± 3dB · Drivers: 50mm · Weight: 335g / 0.74lbs · Ear Cushion: Memory Foam · Battery Capacity: 1000mA · Charging Time: 3 Hours · Battery Life: Up to 20 Hours · Microphone Sensitivity: -36 ± 3dB · Microphone Pick-up Pattern: Omnidirectional · Stand-by: After 5min on inactivity CHARGE THE HEADSET Connect the included USB charging cable to the headset's charging port. Plug the other end into a USB power source. The indicator light will illuminate red while charging. A full charge takes approximately 3 hours. CONNECT THE HEADSET Tip: Charge fully before first use. Option 1 - Wired USB-C to 3.5mm AUX: Plug the USB-C end of the cable into the designated port on the headset. Plug the 3.5mm end of the cable into the headphone jack on your PC. The headset is ready for use. Option 2 - Wired USB-C to USB-A: Plug the USB-C end of the cable into the designated port on the headset. Plug the USB-A end of the cable into the USB-A port on your PC. Press and hold the button until the earcup LED lights up. On your PC, make sure the audio output is set to "Metal Gear Solid Delta Headset". Option 3 - 2.4G Wireless/Dongle: Connect the USB dongle to an available USB-A port on your PC. The indicator light will begin flashing green. Press and hold the power button on the headset for 3 seconds. The light on the dongle will turn solid green once the headset is successfully connected. On your PC, make sure the audio output is set to "Metal Gear Solid Delta Headset-2.4G". Option 4 - Wireless Bluetooth: Power on the headset. Press and hold the MIC/Mute button for 3 seconds until a blue light starts flashing. This indicates the headset is in pairing mode. Open the Bluetooth settings on your device and locate the "Metal Gear Solid Headset" in the list of available devices and select it to connect. Re-establish a Bluetooth Connection: To activate bluetooth pairing, press and hold the power button and MIC/Mute button simultaneously for 3 seconds. Mute/Unmute: Quick press the MIC/Mute button to switch between muting and unmuting the microphone. When the microphone is actively picking up sound (live), the tip of the MIC will glow green. If your microphone is muted, there will be no light on the MIC tip. Standy-by Mode: If your headset has been inactive and disconnected for 5 minutes, it will automatically go into standby mode to save power. To reconnect it, simply press the power button to wake it up. It should then automatically try to reconnect to your device. © Konami Digital Entertainment This product was produced by agreement of Geeknet, Inc. under the license from Konami Digital Entertainment, Inc. Geeknet, Inc 625 Westport Pkwy, Grapevine, TX 76051 Phone: 1 (800) 883 - 8895