AJAZZ x NACODEX® AK351 V3 Single Mode Mechanical Keyboard

Introduction

Thank you very much for purchasing our AJAZZ AK351 V3. This product features various cool functions and lighting effects. We hope it provides you with a new operating experience. For more operations, please visit the AJAZZ official website to download the driver.

1. Basic Parameters

• Product brand: AJAZZ
• Product model: AK351 V3
• Transmission method: USB wired
• Interface type: Keywire separation Type-C interface
• Product size: 448x148x23mm
• Product weight: ≈ 1130g
• Shell material: ABS injection molding
• Key cap material: OEM high PBT material [three color matching]
• Lighting effect: Single light (19 sets of lighting effects)
• Key layout: 104 key standard + with metal volume knob
• Product structure: Gasket structure
• Wire length: 1.6M
• Matrix: Full key no impact
• Supported systems: Windows Vista/XP/7/8/10/11, Mac

2. Indicator Light Description

Indicator lights: ⚪⚪⚪ (Num Lock, Caps Lock, Win Lock)

2.1. Num

Press the number keypad on the right to lock the white light that is always on, and then press to unlock the white light that is off.

2.2. Caps Lock

Press Caps Lock to turn on the white light that is always on, and then press to turn off the white light that is off.

2.3. FN+Win

Press the lock Win button to indicate that the white light is constantly on, and then press the unlock button to indicate that the white light is off.

3. Explanation of Light Switching Combination Key

• FN+\: Light effect switching, 19 types of light effects: Constant, Breathing, Rotating Windmill, Flowing Water, Dripping Ripple, Microwave Ripple, Rippling Light, Click Diffusion, Touch and Go, Snowless Trace, Key Ripple, Flowers Bloom, Horse Racing Light, Dragon Soaring, Snake Running, Falling Rain, Left and Right Bows, Left and Right Sources, Great Peng Spreading Wings.
• FN+↑: Light brightness+, when set to the limit, the overall backlight flashes 3 times to indicate.
• FN+↓: Light brightness-, when adjusted to the limit, the overall backlight flashes three times to indicate the limit.
• FN+←: Light effect direction adjustment to the left.
• FN+→: Light effect direction adjustment to the right.
• FN+"-": Light speed-, when set to the limit, the overall backlight flashes three times to indicate.
• FN+"=": Light speed+, when set to the limit, the overall backlight flashes three times to indicate.
• FN+X: Turn off lights/turn on lights.
• FN+Spacebar: Press and hold for 3-5 seconds, the keyboard backlight will flash 3 times, and the factory settings will be restored.

Enable Light Recording Mode

1. FN+1/2/3#: Customize three sets of game lighting effects (preset all white light).
2. FN+1!: Default FPS mode: W/A/S/D/↑/↓/←/→
3. FN+2@: Default LOL mode: Q/W/E/R/D/G/F/B/V/L-Ctrl/L-Alt/Tab/Space/1-6/Esc
4. FN+3#: Default 37 key office mode: A-Z 26 English letters/[/]/;/'/./,/-/=/+
5. FN+~: Record/save lighting effects for the three game modes mentioned above.

Clear Light Recording

Reset to clear light recording.

4. Multimedia Composite Function Description

5. Instructions for Hot Swap Operation Steps

Hot-swappable: Users can replace different switches to customize tactile and auditory feedback. Compatible with most three/five-pin mechanical switches. (Pictures are for reference only, the actual product shall prevail).

1. Use a key puller to pull out the keycaps. (Visual: A keycap puller is shown engaging with a keycap to lift it off).
2. Use a shaft puller to lock the upper and lower buckles at the bottom of the shaft body, and then pull the shaft upwards. (Visual: A switch puller is shown gripping a switch from the top and bottom, ready to extract it).
3. Align the new switch's pins with the holes. (Visual: A new switch is shown with its pins aligned to the corresponding holes on the PCB).
4. Press the switch vertically until it clicks into place. (Visual: A switch is shown being pressed down into the PCB until it is fully seated).

Product Warranty

Thank you for your trust and support in AJAZZ products. To ensure your confident use of this product and better protect your rights, our company will strictly comply with relevant regulations and provide after-sales service.

1. Service period: 12 months warranty from the date of purchase.
2. Service content: Service for repair, replacement, or return of microcomputer commodity in accordance with regulations.
3. Not covered by warranty:
   1. Exceeded the valid service or free repair period;
   2. Failure or damage caused by not using, maintaining, or storing according to the correct instructions;
   3. Failure or damage caused by repair by unauthorized repair agencies;
   4. Products without dealer information and seal on the warranty card;
   5. Unauthorized alteration of the content of the three-guarantee certificate;
   6. Product defects caused by force majeure (such as natural disasters);
   7. Product defects caused by human factors (such as operation errors, bumps, unsuitable voltage input, etc.);
   8. Other failures or damages not related to product design, technology, manufacturing, or quality issues.

Warranty Card

Product model: ____________________

Purchase date: ____________________

Customer name: ____________________

Contact phone: ____________________

Contact address: ____________________

• This certificate is an important basis for AJAZZ product after-sales service. Please keep it properly.
• For any product issues, you can add the WeChat official account to consult.

Manufacturer Information

Manufacturer: Shenzhen AJAZZ Tongchuang Electronic Technology Co., Ltd.

Address: 21st Floor, Building A, Zhongji Zhigu Industrial Park, Kengtou Community, Fenghuang Street, Guangming District, Shenzhen City.

Phone: 86-0755-2740 7340

Executive standard number: GB/T14081-2010

More Product Information

For more product information, please follow:

• WeChat official account: Search "AJAZZ黑爵外设"
• Douyin account: Search "ajazz2009"