SONOFF iHost
User manual V1.0
Smart Home Hub
Product Introduction
LED Indicator Status and Description
| LED Indicator Status | Description |
|---|---|
| Flashes red | Powering on |
| Solid red | Powered on, no network connection |
| Solid blue | Network connection successfully |
| Breathing yellow | Sub-device pairing status |
| Flashes red quickly | Powering off |
| Double flashes blue (Twice) | Entered password reset status |
| Flashed yellow quickly | Upgrading |
Button Operation Instructions
| Button | Instruction |
|---|---|
| Power button | 1. Short press to power on, LED indicator lights up. 2. Press and hold for 3s to power off, LED indicator turns off. |
| Zigbee device pairing button | Short press to enter Zigbee device pairing status, button indicator lights up and LED indicator breathes yellow. Note: In pairing status, short press again to exit pairing status, and the button indicator will turn off. |
| Security button | 1. Short press to enter arm status, button indicator lights up. Press again to disarm, button indicator turns off. 2. When the speaker is sounding and the button indicator is flashing during arming or disarming, short press the button to silence and stop the LED indicator flashes. Note: Arm and Disarm can be set in the iHost console. |
| Reset button | 1. Double press the reset button to enter password reset status (select 'Forgot Password' on the console login page to reset the password). 2. Press and hold for 10s to restore factory settings. |
Features
iHost is a local smart home hub that controls devices in the centre admin console via LAN, enabling device adding, control, and smart scene setting without cloud connection. It allows for smart security setup or alarms for various smart scenes, and checking logs of devices or smart scenes.
- Smart Security ?️
- Local Smart Scene ?
- Open API Interface ⚙️
- Zigbee 3.0 Hub ?
- LAN Control ?
- Data Local Storage ?
- Support Multiple Terminal Control ?
- Compatible with Multiple Devices Type ?
Usage Instructions
1. Power On
2. Log in to iHost Centre Admin Console
Enter the URL http://ihost.local/ in your PC browser. On the first login, you will need to set a password.
Note: iHost and the PC must be on the same local network (LAN).
If http://ihost.local/ is inaccessible, check the iHost's IP address by accessing your router's backend and enter the IP address in your browser.
3. Add Device
3-1. Add Zigbee Device
Method 1: Via iHost Centre Admin Console
Method 2: Via Local Button
3-2. Add Camera
Specifications
| Model | AlBridge, AlBridge-26 |
|---|---|
| Input | 5V-2A |
| Power interface type | Type-C |
| Network interface type | RJ45 |
| Wireless connection | Wi-Fi IEEE 802.11 b/g/n 2.4GHz, Zigbee 3.0 |
| Storage method | TF card (TF card supports up to 256GB) |
| Working temperature | -10°C~40°C |
| Working humidity | 5%~95% RH, non-condensing |
| Casing material | ABS |
| Product dimension | 120x135.5x41mm |
User Guide
For the complete user guide, please visit: https://sonoff.tech/ihost-user-guides
Compliance and Safety Information
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, designed to provide reasonable protection against harmful interference in a residential installation. If interference occurs, users are encouraged to try measures like reorienting the antenna, increasing separation, or consulting a dealer/technician.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits for an uncontrolled environment. It should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
ISED Notice
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the conditions that the device may not cause interference and must accept any interference received. This Class B digital apparatus complies with Canadian ICES-003(B) and RSS-247.
WEEE Disposal and Recycling Information
Products bearing the WEEE symbol are waste electrical and electronic equipment and should not be mixed with unsorted household waste. Hand over waste equipment to a designated collection point for recycling to protect human health and the environment. Contact local authorities for more information.
EU Declaration of Conformity
Shenzhen Sonoff Technologies Co., Ltd. declares that the radio equipment type AlBridge/AlBridge-26 complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: https://sonoff.tech/usermanuals
For CE Frequency
Operation frequency Range: 2405-2480MHz (Zigbee), 2402-2480MHz (BLE).
Wi-Fi Operation Frequency: 802.11 b/g/n20 2412–2472 MHz, 802.11 n40: 2422-2462 MHz.
RF Output Power:
9.72dBm (Zigbee), 6.74dBm (BLE).
18.01dBm (802.11b), 15.93dBm (802.11g), 14.96dBm (802.11n20), 15.44dBm (802.11n40) (Wi-Fi).
SAR Warning
Under normal use, this equipment should be kept a separation distance of at least 20 cm between the antenna and the user's body.
Italian Disposal Instructions: Check local municipality regulations for separate collection and correct disposal of components.
Manufacturer Information
Shenzhen Sonoff Technologies Co., Ltd.
Address: 3F & 6F, Bldg A, No. 663, Bulong Rd, Shenzhen, Guangdong, China, ZIP code: 518000
Service email: support@itead.cc
Website: sonoff.tech
MADE IN CHINA
Recycling symbols and logos (CE, FC) are present, indicating compliance and environmental considerations.
