Specifications
Dimension | Weight of product | Rated input power | Rated volume of dryer | Rated voltage | Rated frequency |
---|---|---|---|---|---|
595×580×840(mm) | 34kg | 2000W | 10kg (Dry clothes) | 220-240V~ | 50-60Hz |
Introduction
Before using your tumble dryer, please read this manual carefully and keep it for future reference. ⚠️
The appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by a utility.
Please keep this manual in a safe place. Thanks for buying this new Beautiful Cat electronic clothes dryer.
Safety Information
- Unique and luxury design: Design is according to front loading washing machine with unique appearance.
- Micro Control: Simple and convenient operation with the help of PCB board, and it will feel the temperature when drying automatic.
- Big size door window: See the procedure of drying clearly through this window.
- Door opening: The door opens 180°, making it very convenient to put in and out clothes.
- Compact design: Big capacity and unique outlook with anti-dust, anti-humidity, anti-shake, long life, and low noise design.
- The tumble dryer is not to be used if industrial chemicals have been used for cleaning.
- The lint trap has to be cleaned frequently.
- Lint must not be allowed to accumulate around the tumble dryer.
- Adequate ventilation has to be provided to avoid the back flow of gases into the room from appliance burning other fuels, including open fires.
- Do not dry unwashed items in the tumble dryer.
- Items soiled with substances such as cooking oil, acetone, alcohol, petrol, kerosene, spot removers, turpentine, waxes, and wax removers should be washed in hot water with extra detergent before drying.
- Items such as foam rubber (latex form), shower caps, waterproof textiles, rubber-backed articles, and clothes or pillows fitted with foam rubber pads should not be dried in the tumble dryer.
- Fabric softeners, or similar products, should be used as specified by the fabric softener instructions.
- The final part of a tumble dryer cycle occurs without heat (cool down cycle) to ensure items are left at a safe temperature.
- WARNING: Never stop a tumble dryer before the end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated. ?
- The exhaust air must not be discharged into a flue used for exhausting fumes from appliances burning gas or other fuels.
- The appliance must not be installed behind a lockable door, a sliding door, or a door with a hinge on the opposite side to that of the tumble dryer, in a way that restricts full opening of the dryer door.
- Oil-affected items can ignite spontaneously, especially when exposed to heat sources. The items become warm, causing an oxidation reaction that creates heat. If heat cannot escape, items can become hot enough to catch fire. Piling, stacking, or storing oil-affected items can prevent heat escape and create a fire hazard. ?
- If unavoidable, fabrics containing vegetable or cooking oil or contaminated by hair care products should first be washed in hot water with extra detergent to reduce the hazard.
- The appliance should not be overturned during normal use or maintenance.
- Remove all objects from pockets such as lighters and matches.
- This appliance can be used by children aged 8 years and above, and persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, if given supervision or instruction on safe use and understanding hazards. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
- For appliances with ventilation openings in the base, a carpet must not obstruct the opening.
- If the power cable is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
- This appliance is for indoor use only.
- The openings must not be obstructed by a carpet.
- Children less than 3 years should be kept away unless continuously supervised.
- Electrical equipment is not intended to operate in non-air-conditioned or external atmospheres.
Correct Disposal of this product:
This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling. ♻️
Energy test with Full heat Extra dry Program.
Installation Before Use
Step 1: Placement
The dryer should be placed in a ventilated area with no less than 15 cm distance from the wall. If placed in a room such as a bathroom, it is suggested there are no obstacles within 1.5m in front of the dryer and it is kept ventilated.
Diagram Description: A simple line drawing shows a dryer with a measurement of '>15cm' indicating the required distance from the wall.
Step 2: Horizontal Adjustment
To ensure proper operation, the dryer must be placed horizontally. Tie a heavy object on a string to the front and sides of the dryer. If the measurements (A' and B') match the original measurements (A and B), the dryer is placed horizontally. If the objects do not match up, something should be used to level the dryer.
Diagram Description: A diagram shows a dryer with strings attached to its front and sides, with labels A, B, A', B'. The condition A'=A, B'=B is indicated for horizontal placement. A note states 'The heavy' referring to the object used for testing.
Notice: If the dryer is not placed horizontally (lean angle > 2°), it will operate unbalanced and be more likely to fault.
Notice when installing:
- Do not install the dryer in the open air or a place easily damaged by water. ?
- Do not place the back of the dryer near curtains or other obstacles.
- Do not place the dryer near gas or flammable materials. ?
Step 2: Precautions
- Do not store or install the dryer where it will be exposed to water or the weather. If unavoidable, please dry the dryer before each use.
- Please install the dryer in a well-ventilated area for better air circulation and to avoid obstructing air intake passage.
- To avoid deformation of the control panel, do not place any heavy or hot articles on top of the dryer.
- Do not try to dry raincoat or fluff clothes, or items containing rubber or elastic materials on any heat setting.
- To avoid problems from wet clothes, minimize risk by dehydrating items before placing them inside the dryer.
- Do not spray combustible aerosols near the dryer during use. If accidental spray occurs, do not touch the plug or start/pause button.
- To avoid scalding, do not open the dryer door until the program has completed.
- Do not dry any clothes that are contaminated with combustible materials, e.g., gasoline, methylated spirits, etc.
- When the dryer is working, the back side will become hotter. In order to avoid such risk, the dryer is not intended for use by young children or infirm persons without supervision.
- Do not operate this dryer if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts.
- Please do not use the machine if your feet or hands are wet.
This product belongs to Type I electronic products. Please take note of safety problems accordingly:
- It is a rule to use power which is buried in the earth and will not touch any social equipment such as gas pipes or water pipes. Make sure the difference of different lines and they are not connected.
- Please use a special socket which is according to National Standard and will endure 10A current.
To be safe, please make improvements as soon as possible according to the rules and suggestions mentioned above.
Clothes with the following markings shall not be dried in this dryer:
- Marking: Not used for dryer in the tub.
- Marking: Hang for dry.
- Marking: Drip dry.
- Marking: Flat dry.
- Marking: Dry automatically.
Diagram Description: A series of icons representing different drying methods are shown, with a cross (❌) over the ones not suitable for this dryer: 'Not used for dryer in the tub', 'Hang for dry', 'Drip dry', 'Flat dry', 'Dry automatically'.
Operation Explanation
1. Preparing before drying
- Clothes have to be washed and dehydrated before putting in the dryer.
- Put same kind of clothes to dry together.
- Sort your clothes into loads that take a similar time to dry, e.g., heavier items from light items.
- Make sure the decorations and buttons are safe for high temperature and will not damage the inner tube of the dryer. Make sure the clothes are well protected.
- It is suggested to turn the clothes inside-out.
- Please check the clothes after washing; if there is dirt on clothes, the drying process cannot be relied on to remove the remaining dirt.
- Please make sure the power plug is well connected and the supply cord is in good condition.
2. Check filter
- Make sure the filter is well cleaned and in the right position.
- Filter must be cleaned regularly.
3. Put clothes into the dryer
- For faster results, it is better to put clothes with 1/2-2/3 the capacity of the inner tube for drying, because drying needs space to make clothes circulate evenly.
- When drying big clothes, it is better to include several small items to help balance the load.
- When drying expensive or little clothes (<1.5kg), it is better to add several towels whose fibers won't fall off easily; this will help dry the clothes more evenly.
- To avoid creased, rough, or static electricity clothes, do not over dry.
4. Close the door
Ensure the door is securely closed before starting.
5. Instruction on control panel
Diagram Description: The control panel features several touch buttons and a digital display. The buttons are labeled: 'Start / Pause' (①), 'Program' (②), 'Heat' (③), and 'Power On / Off' (④). The display shows '8:88' as a default or example. Indicators for 'Extra', 'Smart', 'Airing', '30min', '60min', '90min', 'Full', 'Half', 'Airing' are also present.
Button Functions:
- ① Start / Pause: Press to start the drying cycle or pause it. Pressing again restarts the cycle. If the dryer is on and 'Start' is pressed directly, it runs the 'Smart dry' program.
- ② Program: Selects the drying program (Extra dry, Smart dry, Airing, 30mins, 60mins, 90mins). The indicator light for the selected program will illuminate.
- ③ Heating: Selects the heating mode (Full, Half, Airing). This option is available for 30, 60, and 90-minute programs.
- ④ Power On / Off: Press to turn the appliance on or off.
Program Setting:
1. Press the power touch key to turn on (off) the power. ⚙️
2. Program setting: Choose the program based on clothing quality and quantity by pressing the 'Program' touch key. The indicator light will illuminate.
3. Heating modes: For 30, 60, and 90-minute programs, select Full heating, Half heating, or Airing by cycling through the options.
4. Press the 'Start' touch key to begin the cycle. Pressing 'Start' again pauses the cycle, allowing you to open the door (be cautious of hot steam). Pressing it again resumes the cycle.
5. Child Lock Function: To activate, press 'Program' and 'Start' keys simultaneously for about 2 seconds. A confirmation tone will sound, and the child lock indicator on the display will blink. To cancel, press both keys again simultaneously.
Default State of Each Program:
Program | Max volume of dry clothing's | Heating mode | Clothing's type | Wrinkle | Max dry time (h) |
---|---|---|---|---|---|
Extra | 8.5-10 kg | Full heat | Bulky clothing: bed sheet, cotton padded clothes, jeans | V | 2.5 |
Smart | 2.0-6.0kg | Full heat | Cotton towels, jeans | V | 1.5 |
Airing | 2.0-3.0kg | Airing | Clothes that are not suitable for heating and drying, such as silk clothing and chemical fiber | V | 1.5 |
30min | <1.0kg | Full/Half/Airing | Cotton towels, jeans | V | 0.5 |
60min | 3.0kg-3.5kg | Full/Half/Airing | According to the amount of clothing, to choose heating time, the more amount of clothing, heating time longer. According to the clothing material choose heating mode, the difficulty of clothes drying selects the full heating / half heating, should not be suitable to heated drying clothes selected air drying. The default heating mode is full heating. | V | 1.0 |
90min | <5.0kg | Full/Half/Airing | According to the amount of clothing, to choose heating time, the more amount of clothing, heating time longer. According to the clothing material choose heating mode, the difficulty of clothes drying selects the full heating / half heating, should not be suitable to heated drying clothes selected air drying. The default heating mode is full heating. | V | 1.5 |
Notice: Cold air function circulates cold air for 10 minutes at the end of program. This ensures that the items are left at a temperature, and that the items will not be damaged. Crease Guard adds an extra 30s after the program to shake clothes in order to protect against creasing.
Crease Guard means after programming, it adds extra 30s' one-way running to shake clothes in order to protection of creasing.
The inside temperature and humidity will not affect drying time.
Check the label attached on clothes and choose the right temperature and time according to the explanation.
Few clothes below 2.0kg shall be selected with "extra dry program" and "full" heat for drying.
6. End of Program
At the end of program, buzzer rings to remind you to take out clothes from the dryer. ?
7. Take out the Plug
To be safe, please unplug the unit after each use. ?
8. Clear filter, cabinet and inner tub
Accumulated dust, fiber, and debris will affect the air circulation inside the dryer, which will cause longer drying times. It is advised to clean the filter and inner tube after each use.
Make sure to cut off the power before clearing. ?
Filter Clean:
Diagram Description: A diagram shows the location of the lint filter in the dryer door opening.
- Remove filter: The lint filter is located in the door opening. Remove the lint filter and open it out.
- Clean filter: Wipe down with a damp cloth.
- Re-fit filter: Once the filter is dry, re-fit into the door opening.
- Wipe the filter after using every time.
Cleaning cabinet and inner tube:
Use a soft damp cloth to wipe the cabinet and inner tube.
- Do not rinse by water directly. ?
- Do not use scour wipes.
- Do not use gasoline and alcohol wipes.
Make sure to open the front door for aeration after cleaning the inner tube.
Other functions description
Step 1: Warning function
Fault | Cause of fault | Fault indication (sound) | Solution of alarm |
---|---|---|---|
Open door alarm | The door has opened during the program | Not solved, the buzzer sounds every 15 minutes | Close door |
Step 2: Auto power-off function
- This machine will auto power-off after 10 minutes when you do not set any program.
- This machine will auto power-off after 6 time's buzzer on drying.
Trouble Solution
Trouble | Cause | Solution |
---|---|---|
Dryer won't start | Power cut | Wait for power to restore |
Power plug not correctly connected | Check the power socket and make sure plug is connected tight | |
Temperature fuse is cut | Please ask technician to exchange the temperature fuse | |
Dryer releasing extensive heat | Lint trap requires cleaning | Clean lint trap |
Intake or exhaust passage is obstructed | Clean air intake and exhaust and check for obstructions (e.g., Curtain). | |
Wet clothes | Dryer too full | Make sure the dryer is not too full. Max volume of the dryer is 7kg. |
Clothes left in dryer too long after the end of the program | Immediately remove clothes when program finished. | |
Clothes not assorted properly | See page 7. | |
Wrong temperature for clothes | Observe the maintenance label on clothes. | |
Shrinks clothes | Clothes over dried | Observe the maintenance label on clothing. Remove clothes from dryer while still damp, finish drying process by hang drying. |
Lint balls on clothing | Synthetic fibre rubbing with each other cause lint which attaches to clothes | Use fabric softener. Please spray settled glue on cuff and neckline when ironing. |
Note on no heat: If there is no heat from the dryer, please press the plastic push button at the rear of the dryer to activate the thermostat in order to reheat the element. (Illustration not provided, refer to physical product)
The sound of dryer when runs can cause:
- Excessive noise of vibration: Due to heavy wet clothes turning and bumping.
- Air bumping: When drying, the machine will generate steam which will come out from the exhaust pipe. This will cause bumping with the bottom of the inner tub.
Notice
1. Read before use:
- Oil-affected items can ignite spontaneously, especially when exposed to heat sources such as in a tumble dryer. The items become warm, causing an oxidation reaction in the oil. Oxidation creates heat. If the heat cannot escape, the items can become hot enough to catch fire. Piling, stacking, or storing oil-affected items can prevent heat from escaping and so create a fire hazard. ?
- If it is unavoidable that fabrics that contain vegetable or cooking oil or have been contaminated by hair care products be placed in a tumble dryer, they should first be washed in hot water with extra detergent; this will reduce, but not eliminate, the hazard.
- The final part of a tumble dryer cycle occurs without heat (cool down cycle) to ensure that the items are left at a temperature that ensures the items will not be damaged.
- Warning: Never stop a tumble dryer before the end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated.
- This dryer has ventilation openings in the base; carpet must not obstruct the openings.
- The dryer must not be installed behind a lockable door, a sliding door, or a door with a hinge on the opposite side to that of the tumble dryer in such a way that a full opening of the tumble dryer door is restricted.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instructions concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they don't play with the appliance.
- The lint trap has to be cleaned frequently; lint must not be allowed to accumulate around the tumble dryer.
- Caution, risk of fire symbol: This appliance has a risk of fire; caution should be enforced while operating. ⚠️?
- Items that have been soiled with substances such as cooking oil, acetone, alcohol, petrol, kerosene, spot removers, turpentine, waxes, and wax removers should be washed in hot water with an extra amount of detergent before being dried in the tumble dryer.
- Items such as foam rubber (latex foam), shower caps, waterproof textiles, rubber-backed articles, and clothes or pillows fitted with foam rubber pads should not be dried in the tumble dryer.
- Fabric softeners, or similar products, should be used as specified by the fabric softener instructions.
2. When using:
- If the drying process can operate while the door is open, it should be sent to maintenance.
- If the drying process can operate without pushing the "START/PAUSE" button, it should be sent to maintenance.
- This dryer is not intended to be placed on top of a washing machine.