Product Description
The VIMAR 4652.2812ES is an AHD Day & Night Dome Camera featuring a 5 Mpx resolution and a 1/2.5" sensor. It includes a mechanical IR filter, a 2.8-12 mm varifocal lens, and offers 0 Lux sensitivity with IR illumination ON. The camera has an IP66 protection degree and an IR illuminator with a range of up to 30 meters. It supports Smart-IR technology and AHD-CVBS switching. The power supply requirement is 12 Vdc 400 mA. The camera comes complete with a bracket designed for protected cable passage. Its weight is 550 g.
Package Contents
- Telecamera (Camera)
- Istruzioni per l'uso (Quick Start Guide)
- Dima di foratura (Drill Template) ?
- Viti (Screws & Spiles) ?
- Chiave a brugola (Allen Key) ?
Upon receiving the device, please check the included accessories. The illustrations provided are for reference only.
Connections
The camera features the following main connections:
- DC 12 V IN: Power input connector.
- VIDEO OUT: Video signal output connector.
Visual description of connections: A diagram shows two ports labeled "DC 12 V IN" and "VIDEO OUT". The "DC 12 V IN" port is a barrel connector, and the "VIDEO OUT" port is a BNC connector. There are also indicators for "Fuoco/Focus" and "Zoom" lenses, typically adjusted via manual rings on the lens assembly.
Installation Guide
Before starting installation, ensure the wall or ceiling is sufficiently solid to support three times the weight of the camera. Install and use the camera in a dry environment.
Mounting Steps:
- Drill the screw holes and the cable hole on the wall according to the drill template.
- Route the cables and connect the power cable and video cable.
- Secure the mounting base with the camera to the wall using the provided screws.
Dimensions: The camera base has a diameter of approximately ⌀ 100 mm, with mounting holes spaced at 4 x ⌀ 4.5 mm. The overall camera body has a diameter of approximately ⌀ 120 mm and a height of approximately 100 mm.
DVR Coaxial Control
The camera supports control via DVR over coaxial cable:
- Recall the PTZ menu of the DVR.
- Use the "Enter" button from the DVR's OSD menu to access the camera's menu.
OSD Menu Structure
The camera's On-Screen Display (OSD) menu allows for configuration of various settings. Below is a representation of the menu structure:
- MAIN
- AE (Auto Exposure)
- AWB (Auto White Balance)
- DAY/NIGHT
- IMAGE ENHANCE
- VIDEO SETTING
- LANGUAGE (English/Italiano)
- RESET
- SAVE&EXIT
- EXIT
- EXPOSURE
- BRIGHTNESS (Range: 0-20)
- EXPOSURE MODE (GLOBAL, GLOBE BLC)
- AWB
- MODE (ATW, MWB)
- RGAIN (Range: 0-127)
- BGAIN (Range: 0-127)
- DAY/NIGHT
- MODE (EXT, AUTO, COLOR, B/W)
- IMAGE ENHANCE
- CONTRAST (Range: 1-10)
- SHARPNESS (Range: 1-10)
- SATURATE (Range: 1-10)
- 2DNR (Range: 1-10)
- D-WDR (Options: OFF/ON)
- FLIP (Options: OFF/ON)
- MIRROR (Options: OFF/ON)
- VIDEO SETTING
- HD Mode:
- STANDARD
- APPLY&REBOOT
- AHD Mode:
- 5MP20
- 1080P25/1080P30/4MP15/4MP25/4MP30
- 5MP12.5/5MP20
- CVBS Mode:
- PAL
- PAL/NTSC
- HD Mode:
Technical Specifications
Parameter | Specification |
---|---|
Model | 4652.2812ES |
Sensor | 1/2.5" CMOS |
Pixel Image | 2592 (H) x 1944 (V) |
Sensitivity | 0 lux (24 IR led ON) |
Lens | 2.8-12 mm Varifocal lens |
Vision Degree | 94° - 35° |
Video Format | PAL/NTSC |
S/N Ratio | ≥ 42 dB |
Video Output | AHD/CVBS |
Functions | 2DNR, Smart-IR, BLC, D-WDR, AGC |
Day&Night | AUTO / COLOR / B&W / EXT |
IR Range | 30 m |
IP Degree | IP66 |
Storage Temperature | -30 °C ~ +60 °C |
Operating Temperature | -30 °C ~ +60 °C (IR OFF) |
Power Supply | 12 Vdc ±10% - 400 mA (max) |
Dimensions | ⌀ 120 x 100 mm |
Weight | 550 g |
Safety, Warnings, and Compliance
General Warnings and Cautions
Before operating the product, it is strongly advised to read the manual and keep it in a safe place for future reference. Use only the specified power supply. Avoid improper operation, shocks, vibrations, or heavy pressing that could damage the product. Do not use corrosive detergents to clean the camera body; use a soft, dry cloth for light dirt or a neutral detergent for stubborn stains. Avoid aiming the camera directly at extremely bright objects like the sun, as this may damage the image sensor. Follow installation instructions carefully to avoid receiving a reversed image. Do not operate the camera if temperature, humidity, or power supply are outside specified limits. Keep the device away from heat sources such as radiators or stoves. This document provides product instructions and is not a quality warranty. Vimar reserves the right to amend errors, inconsistencies, software upgrades, and product improvements without prior notification.
Installation Rules
Installation must be carried out by qualified personnel in compliance with current electrical equipment installation regulations in the country where the product is installed.
Conformity to Standards
The product complies with the EMC Directive, RoHS Directive, and standards EN 55032, EN 55035, and EN IEC 63000. It also adheres to REACH (EU) Regulation no. 1907/2006 - Art.33, which indicates the product may contain traces of lead.
WEEE - Information for Users
The crossed-out bin symbol ?️ indicates that this product must not be disposed of with general household waste. It should be sent to separate collection facilities for recovery and recycling, in compliance with national laws of EU countries implementing the WEEE Directive. This ensures proper environmental and human health management. Please check local dispositions for correct disposal in your country.
Privacy Policy and Disclaimer
In accordance with Regulation (EU) 2016/679 on personal data protection, Vimar S.p.A., as the manufacturer, guarantees that personal data processing for this video surveillance system is minimized and strictly necessary for its operation. Data is processed by Vimar S.p.A. solely for product support and after-sales services, as detailed in the privacy policy on www.vimar.com. Users are responsible for ensuring compliance with data protection regulations, adopting security measures to prevent data loss, and managing recordings according to legal storage periods. Users must protect their passwords and access codes. If the camera monitors public areas, visible signage indicating 'area under video surveillance' is required. For private surveillance, the viewing angle must be limited to private property, excluding communal areas or third-party spaces to prevent unlawful interference with privacy. Vimar S.p.A. disclaims liability for the system's use by the user and for the accuracy of signage information, especially in case of regulatory changes.