Pentair GRO-2550 4-Stage Reverse Osmosis Water Filtration System
Features and Benefits
- Includes 50 gallon per day high recovery GRO reverse osmosis encapsulated membrane
- Water on demand delivered from a storage tank
- Encapsulated element for simplified replacement
- Meltblown sediment depth prefilter
- Extruded carbon block prefilter
- Reduces salts, dissolved minerals, and bad taste and odor
- Designed for chlorinated and non-chlorinated potable drinking water
- Drinking water faucet with air gap
- 3/8" tubing to the faucet for high flow
Installation Tips
- Install vertically with housing handing down
- Choose a mounting location suitable to support the full weight of the system when operating
Operation Tips
- Replace pre/post filters every 12 months and RO membrane 18 months, pending water conditions
- When ready to change out filters and membrane, make sure to turn off or bypass the water from the system
Applications
- Point-of-Use drinking water
- Undersink application
- Refrigerator icemaker
Shipping Specifications
| PART NUMBER | MODEL | DESCRIPTION | CARTON QTY. | CARTON DIMENSIONS (INCHES/MILLIMETERS) |
|---|---|---|---|---|
| 161154 | Pentair GRO-2550 | 4 Stage GRO Reverse Osmosis System | 1 | 18.7" L X 16" W X 18.2" H (475 mm X 406 mm X 462 mm) |
| 4004424 | GRO-50EN | Stage 3, 50 GPD Encapsulated GRO Reverse Osmosis Membrane w/ DLFC | 16 | 11.5" L X 12" W X 17" H (292 mm X 305 mm X 431 mm) |
| 155014-43 | P5 Spun Polypropylene | Stage 1 Sediment Pre-Filter, 5 Micron | 24 | 16" L X 10.75" W X 10.5" H (406 mm X 273 mm X 268 mm) |
| 155634-43 | EPM-10 | Stage 2 Carbon Block Pre-Filter | 12 | 13" L X 10.5" W X 11" H (330 mm X 268 mm X 279 mm) |
| 255521-43 | GS-10RO-B | Stage 4 GAC Post Filter | 12 | 10" L X 9" W X 7" H (254 mm X 229 mm X 178 mm) |
Performance
The GRO-2550 system installed with P5, EPM-10, GRO-50EN, GS-10RO filter cartridges has been tested according to NSF/ANSI 58 for the reduction of substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system as specified in NSF/ANSI 58.
MODEL GRO-2550
| Substance | Influent Challenge Concentration | Max. Permissible Product Water Concentration | Reduction Requirements | Average Reduction |
|---|---|---|---|---|
| Total Dissolved Solids | 750 ± 40 mg/L | 187 mg/L | 96.5% | >99.99% |
| Cysts* | Minimum 50,000/mL | 187 mg/L | 99.95% | 96.5% |
* NSF/ANSI Standard 58 certified to reduce cysts such as Cryptosporidium and Giardia by mechanical means.
EPA EST. NO. 082989-CHN-001
System Tested and Certified by NSF International against NSF/ANSI Standard 58 for the reduction of the claims specified on the Performance Data Sheet.
Specifications
- Temperature Range: 40-100°F (4.4-37.8°C)
- Pressure Range: 40-100 psi (2.75-6.89 bar)
- System Production Rate: 10.09 gpd (38.19 Lpd)
- Dimensions: 15" W x 5 1/2" D x 17 1/4" H (38.1 cm W x 12.7 cm D x 43.8 cm H)
- Recovery Rating: 31.76%
- Efficiency Rating: 15.39%
- TDS Rejection: 96.8%
- Weight: 18 lbs. (8.16 kg)
Contact Information
Pentair Residential Filtration
13845 Bishops Dr. | Suite 200 | Brookfield, WI 53005 | United States
P: 262.238.4400 | Customer Service: 800.279.9404 | tech-support@pentair.com | pentair.com
All indicated Pentair trademarks and logos are property of Pentair. Third party registered and unregistered trademarks and logos are the property of their respective owners.
© 2025 Pentair. All Rights Reserved.
