ARIA+ USER MANUAL

What's in the Box

• Aria+ headphones
• Charging case
• 1 Charging cable

Getting Started

1. Charge

IMPORTANT: Remove the protective plastic covering on each of the earbud charging ports.

Place the earbuds in the charging case and plug in the included USB-C charging cable. The LED will flash green when charging and turn off when fully charged.

[Illustration: An earbud with a blue arrow pointing to its charging port, and a charging case connected to a USB-C cable.]

2. Pair

To power on, take ARIA+ out of the charging case. Your earbuds will automatically go into pairing mode.

Navigate to your devices Bluetooth® settings and select ARIA+.

[Illustration: The earbuds and charging case, and a smartphone screen displaying Bluetooth settings with 'ARIA+' highlighted as an available device.]

3. Wear

Slide the earhook behind your ear and rotate it down until the earpiece rests over the top of your ear.

[Illustrations: How to place the earbud with the earhook behind the ear and rotate it into position.]

Controls

Left Earbud

• Play/pause: Tap either earbud 1x ⏯️
• Previous track: Tap left earbud 3x ⏪
• Volume down: Tap left earbud 2x ?

Right Earbud

• Play/pause: Tap either earbud 1x ⏯️
• Next song: Tap right earbud 3x ⏩
• Volume up: Tap right earbud 2x ?

Common Controls

• Answer/end call: Press either earbud 1x ?
• Reject call: Press and hold either earbud for 2 secs ?
• Voice assistant: Press and hold either earbud for 3 secs ?️

Charging Case LED Display

The battery level is displayed on the interior charging case screen. LED light will flash white when battery is below 10%.

[Illustration: An open charging case with a digital display showing '99%' and an LED indicator.]

Specifications

Precautions

1. Listening to loud music for a long time may cause discomfort. Please use medium volume when possible. Do not use high volume for long periods of time.
2. Using headphones will affect your perception of the surrounding environment. Pay attention when using headphones.
3. Do not remove or modify the headphones as this may cause damage or burn out.
4. Do not throw or twist on the headphones.
5. Keep headphones away from fire, hydration and high pressure equipment.
6. Not suitable for children under 3 yrs old. Contains small parts.
7. Do not classify headphones as household waste. Please send them to the local electrical equipment recycling station.
8. The charging pole piece has been treated for anti-corrosion, but seawater is highly corrosive. It is recommended to clean them after being in seawater.

Note: The company does not assume any responsibility for the loss of personal property caused by the violation of the above warnings.

Activate Your Lifetime Warranty

We've got you covered! Register your lifetime warranty here: opnsound.com/pages/warranty

[QR code present.]

EU Declaration of Conformity

We, Conduction Labs Inc. DBA OPN Sound. of 4800 N Federal Hwy, Suite B200, Boca Raton, FL 33431 USA, declare under our sole responsibility that the device is in Conformity with the following relevant Union harmonisation legislation: Radio Equipment Directive (RED) 2014/53/EU

The complete declaration of conformity can be found here: https://opnsound.com/pages/documents

MADE IN CHINA

[CE, FCC, and other regulatory symbols present.]