Lexman Digital Indoor Timer E Type

Product Overview

This digital indoor timer is designed to control various electrical devices such as lamps, lighting chains, automatic watering systems, aquariums, small heaters, and coffee machines. It offers multiple programming options for efficient and automated operation.

Key Features

• 12/24 hour mode selectable
• LCD display with second
• Random function: randomly ON for 10-31 minutes between 6:00 PM and 6:00 AM
• 16 combinations of day or blocks of days for programming
• 10 ON/OFF programs with 1-minute step
• ON/AUTO/OFF selectable modes
• Summer time function available
• Maximum of 99 hours 59 minutes 59 seconds Countdown (CD) function

External Structure

1. LCD display
2. DOWN key
3. Manual key
4. SET key
5. Plug (rear side)
6. MASTERCLEAR key
7. UP key
8. RANDOM key
9. CD key

Initial Operation

1. Plug the timer into a regular 230VAC power outlet. Allow approximately 1 hour to charge the memory back-up battery.
2. Clear all current information by pressing the MASTER CLEAR button with a sharp object (e.g., pen or pencil) after charging.
3. The timer is now ready for setup and use.

Setting the Current Time

1. Press and hold the SET button for at least 2 seconds. "SET" and the current day (e.g., "MO" for Monday) will flash.
2. Press the UP or DOWN button to select the day of the week.
3. Press the SET button once to advance to hour setting. "SET" and "00" will flash.
4. Press the UP or DOWN button to select the current hour.
5. Press the SET button again to advance to minute setting. "SET" and "00" will flash.
6. Press the UP or DOWN button to select the current minute.
7. Press the SET button one more time to complete the setup.
8. To reset the clock, repeat the above steps.
9. During programming, pressing UP and DOWN buttons simultaneously exits the clock setting mode.
10. If no button is pressed for 30 seconds during programming, the timer returns to CLOCK mode.

Setting ON/OFF Events

1. While the timer is in CLOCK mode, press the UP button once to enter event setting mode. The screen will show the first ON event.
2. Press the SET button once. "SET" and the selected day (e.g., "MO") will flash.
3. Press the UP or DOWN button to select the desired day(s) of the week for the ON event.
4. Press the SET button again to advance to hour setting. "SET" and "00" will flash.
5. Press the UP or DOWN button to select the desired ON hour.
6. Press the SET button again to advance to minute setting. "SET" and "00" will flash.
7. Press the UP or DOWN button to select the desired ON minute.
8. Press the SET button one more time to complete the first ON event setting.
9. Press the UP button again to advance to the first OFF event.
10. Repeat steps 2-5 to complete the first OFF event setting. Repeat steps 1-7 to set up to 9 additional ON/OFF events.
11. During programming, pressing UP and DOWN buttons simultaneously exits the event setting mode and returns to CLOCK mode.
12. If no button is pressed for 30 seconds during programming, the timer returns to CLOCK mode.

Note: Ensure ON/OFF events do not overlap. If they do, the event that occurs at the specified time will execute. OFF events have priority over ON events. For ON/OFF events to function, the timer must be in AUTO mode. Random and countdown functions are canceled when ON/OFF events are active.

Set Mode

While the timer is in clock mode, press the MANUAL button to cycle through the following modes:

• ON: The connected device remains ON.
• OFF: The connected device remains OFF.
• AUTO: The connected device follows the programmed timer settings.

Note: If the mode changes from ON to AUTO, the device stays ON until the next programmed OFF time. If the mode changes from OFF to AUTO, the device stays OFF until the next programmed ON time.

Random Function

1. Press the RANDOM button. "R" will appear on the screen, indicating the random function is activated.
2. When activated, the timer will turn ON randomly for 10-31 minutes within the time frame of 6:00 PM to 6:00 AM.
3. Press the RANDOM button again to cancel this function.

Note: For the random function to work, the timer must be in "AUTO" mode. ON/OFF events between 6:00 PM and 6:00 AM, and the countdown program, are automatically blocked when the random function is active.

CD (Count Down) Function

1. While the timer is in CLOCK mode, press the DOWN button once to enter countdown setting mode.
2. Press the SET button once. "SET" and "OFF" will flash. Press UP or DOWN to select countdown ON or OFF. If "ON" is selected, the timer turns ON during the countdown period and then OFF once completed. If "OFF" is selected, the timer turns OFF during the countdown period and then ON once completed.
3. Press the SET button again to set the hour. "SET" and "0" will flash. Press UP or DOWN to select the countdown hour (0-99 hours).
4. Press the SET button again to set the minute. "SET" and "00" will flash. Press UP or DOWN to select the countdown minute.
5. Press the SET button again to set the second. "SET" and "00" will flash. Press UP or DOWN to select the countdown second.
6. Press the SET button one more time to complete the setup.
7. Press the CD button once to activate the countdown program. Press it again to stop the program and restore the set countdown time.
8. The "CD" indicator will flash on the screen when the CD function is activated in CLOCK mode.
9. During programming, pressing UP and DOWN buttons simultaneously exits the countdown setting mode and returns to CLOCK mode.
10. If no button is pressed for 30 seconds during programming, the timer returns to CLOCK mode.

Note: For the countdown program to work, the timer must be in "AUTO" mode. The random function is canceled when the countdown program is active.

12/24 Hour Mode

Press the CD and SET buttons simultaneously to switch the time display between 12 and 24 hour mode.

Summer Time Function

Press the MANUAL and SET buttons simultaneously. The LCD will display "S" (Summer time), advancing the clock by 1 hour. Press both buttons again to revert to winter time, moving the clock back 1 hour and removing "S" from the display.

Operation Priority

The order of priority for timer functions is as follows (highest to lowest):

1. ON or OFF (Manual override)
2. RANDOM
3. CD (Count Down)
4. ON/OFF Events

General Specifications

• Plug Type: E-TYPE
• Power: 230V~50Hz
• Max Load: 3600W, 16(2)A
• Working Temperature: -10°C to +40°C
• Working Humidity: +5% RH to +95% RH non-condensing
• Dimensions: 60x129x81.4mm
• Branding: Lexman
• Warranty: 5 Years
• Mounting Method: Plug-in
• Earthing Method: Plug-in
• Action Type: Type 1
• Pollution Degree: 2
• Rated Impulse Voltage: 2.5kV
• Min. Setting: 1 minute

Safety Introduction

• Do not use the product if it is damaged or defective.
• Do not open or repair the product yourself; consult a professional.
• To clean, unplug the product and use a soft, dry cloth.
• Keep out of reach of children.
• Do not exceed the maximum load.
• Do not plug a multi-socket into the product's output.
• Plug only into a grounded wall socket. Do not plug this type of product in series.
• Avoid humidity, extreme temperatures, vibrations, and shocks.
• Risk of electric shock: do not open the product. No user-repairable parts.
• The product is powered off only when unplugged from the wall socket.

Battery Information

• Battery Type: NIMH 1.2V, R100h
• Keep batteries out of reach of children. Consult a doctor immediately if a battery is swallowed.
• Batteries must be recycled or disposed of properly. Do not dispose of with household waste or in fire. Do not open, short-circuit, or damage batteries.

Warranty and Liability

LEXMAN guarantees the product is free from defects in material and workmanship for five years from the purchase date. This warranty does not cover damages from accident, negligence, misuse, modification, contamination, or improper handling. LEXMAN is not responsible for special, indirect, incidental, or consequential damages. Limitations may vary by region.

Accessories

Check the package for:

• User manual (1 pc)
• Digital Timer (1 pc)

Contact your supplier immediately if any items are missing or damaged.

Disposal Information

Electrical products should not be disposed of with domestic waste. Dispose of them at a communal collection point for environmentally friendly disposal according to local regulations. Packaging material is recyclable.