Conducted Bluetooth Test Setup
This section details the setup for conducted Bluetooth testing. The configuration includes a Rohde & Schwarz CBT Bluetooth Tester and an Agilent Technologies RF Signal Analyzer (MXA). A mobile device (implied to be the unit under test with FCC ID A3LSMJ710F) is connected to this equipment. The screens of the testers display relevant RF parameters such as power levels, frequency, and packet information, indicating the device is undergoing Bluetooth performance verification.
Equipment Visible:
- Rohde & Schwarz CBT Bluetooth Tester
- Agilent Technologies MXA Signal Analyzer
- Cables and connectors for RF signal routing
Conducted WLAN Test Setup
This section illustrates the setup for conducted Wireless Local Area Network (WLAN) testing. The primary equipment used is an Agilent Technologies PXA Signal Analyzer. The mobile device is connected to the analyzer to measure WLAN signal characteristics. The analyzer's display shows spectrum analysis, occupied bandwidth, transmit frequency error, and other key metrics relevant to WLAN performance standards.
Equipment Visible:
- Agilent Technologies PXA Signal Analyzer
- Cables and connectors for RF signal routing
Anechoic Chamber Test Setup
This series of photographs depicts the test setup within an anechoic chamber, commonly used for radiated emission and antenna performance testing. The chamber is lined with RF absorbing foam panels to minimize reflections. A mobile device (FCC ID A3LSMJ710F) is positioned on a non-conductive platform. In some images, an automated antenna positioner or robotic arm is visible, used for precise positioning of the device and antennas during testing.
Environment: Anechoic Chamber
Test Object: Mobile Device (FCC ID A3LSMJ710F)
Ancillary Equipment: Antenna positioner/robotic arm (visible in some images)
Conducted Emission Test Setup
This section shows the setup for conducted emission testing. The mobile device is placed on a table and connected via cables to test equipment. This configuration allows for the measurement of electromagnetic interference conducted back onto the power or signal lines of the device.
Setup Description: Mobile device on a table with external cabling to test instruments.