GeoLED Downlights
GEO12 - CRI80 – SINGLE COLOUR TEMPERATURE
Product Codes: ICDLR12W3K & ICDLR12W4K
Product Visuals and Dimensions
The GeoLED Downlight is a recessed fixture with a white trim and visible heat sink fins. Green wires are visible extending from the unit.
Technical drawing indicates the following dimensions: Cut-out diameter: 82-92 mm Front face diameter: 107 mm Height: 42 mm
Key features and certifications are indicated by icons: 80° Beam Angle, IP44 Rating, Dimmable, Class 3, 80+ CRI, CCT 1 Colour.
Product Features
- 12W Fixed Recessed Downlight
- Dimmable, with compatible dimmer
- Available in single colour or tricolour temperature models.
- Suitable for residential or commercial in either interior or covered exterior installations.
- Lifespan - 54,000 hours (L70)
- Removable driver
Materials & Finish
- Material: Aluminium, corrosion resistant A6063 alloy
- Lens: Opaque PMMA diffuser
- LED Type: Integrated SMD LED
- Shape: Round
- Colour: White
Specifications
- Switching Capacity: 30,000
- Dimmable Type: Triac Dimmable
- Rating: IC-F/IC-4
-
Power:
- Voltage: 230V
- Driver: Coverable driver
- Power Factor: > 0.9
- Wattage: 12W (including the driver)
- Max ambient operating temperature: +45°C
-
Light Output:
- Lumens: 1020lm (3K) or 1040lm (4K)
- Colour Temperature: 3000K or 4000K
- CRI: >80 (CRI90 models available)
Installation
- Mounting: Recessed
- Clearances: *HCB: 0mm | *SCB: 0mm | Height of fitting: 42mm
Note: DALI Dimming available on request. (3K & 4K models only)
*HCB (Height Clearance to Building) and SCB (Side Clearance to Building) clearances of 0mm does not mean that you can drill a hole in solid concrete or wood and install downlight. You must always allow for heat dissipation. Do not install closer than 500mm to illuminated surface. Please refer to instruction sheet for more details.
