LEADZM H7 Electric Scooter User Manual

Contents

1. Package Contents
2. Product Overview
3. Assembly and Set-Up
4. Charge Your Scooter
5. How To Ride
6. Safety Instructions
7. Folding and Carrying
8. Daily Care and Maintenance
9. Specifications
10. Certifications
11. Quick Setup

1. Package Contents

Assembled Electric Scooter

Accessories:

• Screw x 4
• Hexagon Wrench
• Charging Adapter

Carefully check package contents. If anything is missing or damaged, please contact local customer service for support.

2. Product Overview

Diagram Description: The diagram shows an electric scooter with various parts labeled:

• Headlight
• Brake Lever
• Folding Mechanism
• Wheel Motor
• Charging Port
• Control Panel
• Accelerator
• Control Panel
• Scooter Bell
• Buckle
• Brake Light
• Disc Brake
• Kickstand
• Battery Compartment

Control Panel Details:

• Battery level display: The power level is indicated by four power lights. As power is consumed, the lights change from solid to flashing, and finally turn off from top to bottom.
• km/h mph display: Shows speed and distance units.
• Power button: Press to turn on the scooter. Press and hold for 2 seconds to turn off. Press to turn the headlight on/off. Triple press to change the unit (km/h or mph).
• Function: The bottom light either flashes white or green. White indicates regular mode, and green indicates sport mode.

3. Assembly and Set-Up

1. Fasten the handlebar stem on the headset.
2. Attach the handlebar to the stem.
3. Tighten the screws onto both sides of the stem.
4. After assembly, press the power button to turn on the scooter.

4. Charge Your Scooter

Diagram Description: The diagram shows the charging process:

• Lift up the rubber flap.
• Plug the power adapter into the charging port.
• When charging is completed, put back the rubber flap.

5. How To Ride

1. Turn on the scooter and check the power indicator.
2. Step on the deck with one foot, and slowly kick off the other on the ground.
3. When the scooter starts to coast, put both feet on the deck and press the accelerator. The accelerator initiates once the coasting speed exceeds 3.1 mph.
4. Release the accelerator, and the kinetic energy recovery system (KERS) initiates automatically to brake slowly. Squeeze the brake lever for a sudden brake.
5. Tilt your body to the steering direction as you turn, and slowly turn the handlebar.

Safety Tip: Wear helmets and knee pads in case of falls and injuries when you learn to ride.

6. Safety Instructions

Watch out for safety risks:

• Do not ride in the rain.
• Keep your speed between 3.1-6.2 mph when riding through speed bumps, elevator door sills, bumpy roads, or other uneven surfaces. Slightly bend your knees to better adjust.
• Look out for doors, elevators.
• Do not accelerate when you go downhill.

Do not try following dangerous actions:

• Do not press the accelerator when you're walking alongside the scooter.
• Always steer clear of obstacles.
• Do not ride in traffic lanes or residential areas where vehicles and pedestrians are present.
• Do not turn the handlebar violently during high-speed riding.
• Do not hang bags or other heavy stuff on the handlebar.
• Keep both feet on the deck at all times.
• Do not ride in puddles that are higher than 0.78 inches.
• Do not ride with anyone else.

Safety Reminder:

• This electric scooter is a leisure device but is considered a vehicle in public areas. Follow manual instructions and traffic laws for safety. (Pour votre sécurité, veuillez suivre les instructions contenues dans le manuel et les lois sur la circulation et les règlements énoncés par les organismes gouvernementaux et réglementaires.)
• Risks exist due to others' incautious driving. The faster the scooter, the longer it takes to stop. Be cautious of speed, distance, and surfaces.
• Respect pedestrians' right of way. Ring your bell to alert them and pass on their left. When crossing paths with pedestrians, keep to the right at a low speed or dismount.
• Follow safety instructions, especially in areas lacking regulations for electric scooters. LEADZM is not liable for losses or injuries resulting from user instruction violations.
• Do not lend the scooter to untrained individuals. Ensure borrowers know operations and wear safety gear.

WARNING - Risk of Fire - No User Serviceable Parts.

AVERTISSEMENT - Risque d'incendie - Aucune des pièces ne peut être réparée par l'utilisateur.

• Do not keep your feet on the rear.
• Do not touch the disc brake.
• Do not keep your hands away from the handlebar.
• Do not try riding up or down stairs, and jumping over obstacles.

7. Folding and Carrying

Diagram Description: The diagrams illustrate the folding and carrying process.

To Fold:

1. Make sure the scooter is turned off.
2. Unlock the folding mechanism.
3. Bend the handlebar stem to hook the buckle on the rear mudguard.

To Open:

1. Press the bell trigger to release from the buckle.
2. Erect the handlebar and lock the folding structure.

To Carry: Hold the handlebar stem with either one hand or both hands to carry.

8. Daily Care and Maintenance

Cleaning and storage:

Wipe stains with a damp cloth. For stubborn stains, use toothpaste and a toothbrush, then wipe with a damp cloth. Polish scratches on plastic parts with sandpaper or other abrasive materials.

Notes: Do not use alcohol, gasoline, kerosene, or other volatile solvents. Do not use high-pressure water spray. Ensure the scooter is turned off, the charging cable is unplugged, and the rubber flap is closed during cleaning to prevent electric shock or other issues.

Store the scooter indoors in a dry and cool place when not in use. Avoid prolonged exposure to sunlight, overheating, or overcooling, which can accelerate tire aging and reduce the scooter and battery pack's lifespan.

Battery maintenance:

1. Use original battery packs. Using other models or brands may cause safety issues.
2. Do not touch battery contacts, dismantle, or puncture the casing. Keep contacts away from metal objects to prevent short circuits.
3. Use the original power adapter to avoid damage or fire.
4. Dispose of used batteries according to local regulations to protect the environment.
5. Fully charge the battery after each use to prolong its lifespan.

Do not expose the battery to temperatures above 122°F (50°C) or below -4°F (-20°C). Do not leave the scooter or battery in direct sunlight for extended periods. Do not dispose of the battery in fire. If the scooter will be idle for over 30 days, fully charge the battery and store it in a cool, dry place. Recharge it every 60 days to prevent damage beyond the limited warranty. Always charge before the battery is fully depleted to extend its lifespan. Battery performance is optimal at normal temperatures; performance decreases in cold temperatures (e.g., at -4°F, riding range may be halved). Refer to the H7 App for detailed information.

A fully charged H7 Electric Scooter lasts 120-180 days. The intelligent chip logs charging and discharging records. Damage from prolonged lack of charging is irreversible and beyond warranty. Once damaged, the battery cannot be recharged. Do not dismantle the battery pack.

9. Specifications

Diagram Description: The diagrams show how to adjust the disc brake and handlebar.

Adjusting the disc brake: If the brake is too tight, use an M4 hexagon wrench to loosen caliper screws and slightly retract the brake cable. If too loose, loosen screws and slightly pull out the brake cable.

Adjust the handlebar: If the handlebar and stem sway, use an M5 hexagon wrench to tighten screws on the folding mechanism.

[1] Item height: from the ground to the top of the scooter.

[2] General range: measured when it is no wind and at 77°F, the scooter's fully charged to ride at an even speed of 9.3 mph on a flat surface with a load of 165.3 pounds.

Note: Data and specifications may vary due to different models and are subject to change without notice.

10. Certifications

Federal Communications Commission (FCC) Compliance Statement for USA

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

European Union Compliance Statement

Battery recycling information for the European Union:

Batteries or packaging for batteries are labeled in accordance with European Directive 2006/66/EC concerning batteries and accumulators and waste batteries and accumulators. The Directive determines the framework for the return and recycling of used batteries and accumulators as applicable throughout the European Union. This label is applied to various batteries to indicate that the battery is not to be thrown away, but rather reclaimed upon end of life per this Directive.

In accordance with the European Directive 2006/66/EC, batteries and accumulators are labeled to indicate that they are to be collected separately and recycled at end of life. The label on the battery may also include a chemical symbol for the metal concerned in the battery (Pb for lead, Hg for mercury, and Cd for cadmium). Users of batteries and accumulators must not dispose of batteries and accumulators as unsorted municipal waste, but use the collection framework available to customers for the return, recycling, and treatment of batteries and accumulators. Customer participation is important to minimize any potential effects of batteries and accumulators on the environment and human health due to the potential presence of hazardous substances.

Restriction of Hazardous Substance

LEADZM is not responsible for any changes or modifications not expressly approved by LEADZM. Such modifications could void the user's authority to operate the equipment.

CE

11. Quick Setup

Control your H7 Electric Scooter and interact with other smart home devices in the App.

1. Download App: Scan the QR code below or go to the App Store to download the App.
2. Add a device: Open the App, find the Bluetooth logo and click it. (Device: Leadzm, Password: 000000)

QR Code Description: A QR code is displayed for downloading the app.