Dynamic Detection Display Manual
Model: PF08H1
Manufacturer: Shanghai Goodview Electronics Technology Co., Ltd.
Device Display Example
Status: Admittance
Time: Monday 2, 6:00pm
Body temperature: 36.2°C
Result: No entry
Note: "Please set company name" is also displayed.
Introduction
Applications
The PF08H1 Dynamic Detection Display is designed for use with access gates and attendance systems in various public service places, including communities, office buildings, schools, hotels, scenic spots, and transportation hubs.
Specifications and Parameters
Camera Specifications
| Parameter | Value |
|---|---|
| Resolution | 2 million pixels |
| Type | Binocular wide dynamic camera |
| Aperture | F2.4 |
| Focusing distance | 50-150cm |
| White balance | Auto |
| Photo flood light | LED and IR dual photo flood light |
Screen Specifications
| Parameter | Value |
|---|---|
| Size | 8.0 inch IPS LCD screen |
| Resolution | 800 × 1280 |
Processor and Storage
| Parameter | Value |
|---|---|
| CPU | RK3288 quad-core (optional RK3399 six-core, MSM8953 eight-core) |
| Storage | EMMC 8G |
Interfaces
| Interface | Details |
|---|---|
| Network module | Ethernet and wireless (WIFI) |
| Audio | 2.5W/4R speakers |
| USB | 1 USB OTG, 1 USB HOST standard A port |
| Serial communication | 1 RS232 serial port |
| Relay output | 1 door open signal output |
| Wiegand | One Wiegand 26/34 output, one Wiegand 26/34 input |
| Upgrade button | Support Uboot upgrade button |
| Wired network | 1 RJ45 Ethernet socket |
| Credit card reader | None (optional IC card reader, ID card) |
Face Detection Capabilities
| Feature | Support |
|---|---|
| Face Detection | Supports detection and tracking of multiple people at the same time |
| Face library storage | Up to 30,000 |
| 1:N face recognition | Support |
| 1:1 face comparison | Support |
| Stranger detection | Support |
General Parameters
| Parameter | Value |
|---|---|
| Size | Standard: 274.24*128*21.48 (mm) IC card / ID card: 296.18*132.88*25 (mm) |
| Storage temperature | -20℃~60℃ |
| Power consumption | 13.5W (Max) |
| Installation method | Gate bracket installation |
Packing List
- Machine * 1
- Power adapter * 1
- Manual * 1
- Certificate of conformity * 1
Function Configuration
| Feature | Details |
|---|---|
| UI interface | Interfaces include device management, personnel / photo management, record query, etc. |
| Upgrade remotely | Support public cloud deployment, privatized deployment, LAN use, stand-alone use |
Temperature Detection Module
| Parameter | Details |
|---|---|
| Temperature detection | Support |
| Temperature detection distance | 1 meter (optimal distance 0.5 meter) |
| Temperature measurement accuracy | ≤ ±0.5℃ |
| Thermal imaging module pixels | 32 X 32 dots (total 1024 pixels) |
| Temperature measurement range | 10℃~42℃ |
| Temperature alarm | Support (temperature alarm value can be set) |
Power and Operating Environment
| Parameter | Value |
|---|---|
| Power | DC12V (±10%) |
| Operating temperature | 0℃~40℃ |
Installation
Module Structure Description
The device has a main body with dimensions of 274.24*128*21.48 mm. An optional credit card (ID) version has dimensions of 296.18*132.88*25 mm. The structure includes a heat sink, speaker, and space for an infrared thermal imaging module.
Port Description
The device features various ports for connectivity:
- 4P381 Needle seat (white) for Wiegand input and relay connections.
- 3P381 Needle seat (white) for serial communication (RS232) and power input (DC12V).
- 2P381 Needle seat (white) for Ethernet (RJ45).
- 5521 Female waterproof plug (white) for power input.
- USB ports (white and yellow) for USB HOST and USB OTG.
- UBOOT button for firmware upgrades.
Diagram Description: A diagram shows various cable connections to the device, including power, Ethernet, USB, serial, and Wiegand interfaces, labeled with port types and connector descriptions.
Installation Method
The device is typically installed on a gate. This involves opening a 35mm diameter hole in the gate post. The cable is then threaded through the hole, secured with a nut and gasket, and connected to the power supply. The screen will start upon power-up.
Installation on Gate Diagram
Diagrams illustrate the installation process for both single and dual-channel gates. The recommended hole size is 35mm, though this may vary based on the gate type and scene. The process involves unscrewing a nut at the bottom of the gate head post, threading the cable through, and re-tightening the nut with the gasket and cable interface.
Compliance and Safety
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Care and Maintenance
- During installation and use, strictly observe all electrical safety regulations.
- Use only the power adapter provided by a regular manufacturer.
- Ensure the product is installed firmly on the gate.
- If the product malfunctions, contact after-sales service personnel. Do not disassemble or modify the product. The company is not responsible for problems caused by unauthorized modifications.
- Do not immerse the product in water. Use a rain cover if installing outdoors.
- Properly configure and secure all passwords and security settings.
- Do not disassemble the equipment for repair if it malfunctions; this may affect the warranty.
- Avoid extreme environments such as high/low temperatures, high humidity, vibration, radiation, and chemical corrosion.
Warranty Information
Warranty Card
Customers are advised to read, fill in, and keep the warranty card properly after purchase for better service. The card requires customer name, contact person, telephone, address, date of purchase, and serial number. It also includes a section for maintenance records.
Warranty Description
The product is guaranteed for one year from the date of purchase. During the warranty period, under normal use and maintenance, the company will provide free repair and parts replacement for machine malfunctions. The company reserves the right to refuse service or charge fees for issues arising from:
- Failure to provide the warranty card and valid proof of purchase.
- Product failure or damage caused by improper user use.
- Damage due to abnormal external forces.
- Damage caused by unauthorized disassembly or repair.
- Failures and damage caused by natural disasters or force majeure.
- Intentional damage.
The company reserves the right to modify and interpret all content.